库存 件 3-5 days lead time
Huawei S5720-36C-PWR-EI-DC switch with 24-port 1000BASE-T PoE+, 4-port 1000BASE-T PoE+ & 1000BASE-X, 4-port 10GE SFP+, 2 power slots, 1 AC power module equipped, 1 extension slots
Huawei S5720-36C-PWR-EI-DC switch with 24-port 1000BASE-T PoE+, 4-port 1000BASE-T PoE+ & 1000BASE-X, 4-port 10GE SFP+
With 2 power slots, 1 AC power module included
With 1 extension slots
Forwarding perfomance: 132 Mpps
Switching capacity: 598Gbps
Huawei Quidway S5720-EI series enhanced gigabit Ethernet switches (S5720-EI for short) are next-generation switches that provide flexible GE access ports and 10GE uplink ports. S5720-EI provides large table sizes and higher hardware processing capabilities than similar switches. It supports IPv6, intelligent stack (iStack), flexible Ethernet networking. S5720-EI is widely for aggregation/access in enterprise campus networks or gigabit access in data center networks.
|Memory (RAM)||2 GB|
|Flash||512 MB in total. To view the available flash memory size, run the display version command.|
|Mean time between failures (MTBF)||60.72 years when no card is configured; 56.97 years when a 2-port 10GE SFP+ interface card is configured; 55.72 years when a 2-port 10GE RJ45 interface card is configured; 55.82 years when a stack card is configured|
|Mean time to repair (MTTR)||2 hours|
|Service port surge protection||Service ports on front panel: ±6 kV in common mode|
|Ports on the 2-port 10GE RJ45 rear interface card: ±2 kV in common mode|
|Power supply surge protection||Using 500 W AC power modules: ±6 kV in differential mode, ±6 kV in common mode|
|Using 650 W DC power modules: ±2 kV in differential mode, ±4 kV in common mode|
|Stack ports||Ports on the 2-port 10GE SFP+ rear interface card|
|Ports on the 2-port 10GE RJ45 rear interface card|
|Ports on the 2-port QSFP+ rear stack card|
|Rated voltage range||100 V AC to 240 V AC, 50/60 Hz|
|-48 V DC to -60 V DC|
|Maximum voltage range||90 V AC to 264 V AC, 47 Hz to 63 Hz|
|-38.4 V DC to -72 V DC|
|Maximum power consumption (100% throughput, full speed of fans)||Not providing the PoE function: 78 W|
|100% PoE loads: 864.3 W (system power consumption: 124.3 W, PoE: 740 W)|
|Typical power consumption (30% of traffic load)||48.45 W (without card)|
|Tested according to ATIS standard||56.14 W (with 2*10GE optical card)|
|EEE enabled||60.76 W (with 2*QSFP+ stack card)|
|No PoE power consumption||64.8 W (with 2*10GE electrical card)|
|Dimensions (H x W x D)||Basic dimensions (excluding the parts protruding from the body): 44.4 mm x 442.0 mm x 424.7 mm (1.75 in. x 17.4 in. x 16.72 in.)|
|Maximum dimensions (the depth is the distance from ports on the front panel to the handle on the rear panel): 44.4 mm x 442.0 mm x 451.8 mm (1.75 in. x 17.4 in. x 17.79 in.)|
|Weight (with packaging)||9.9 kg (21.83 lb)|
Q: Do I need to buy power supply for S5720-36C-PWR-EI-DC?
A: No, one AC power module is configured by default.
Q: Can Thunder-link.com provide MIB for Huawei S5720 switch?
A: Yes, you may contact our sales directly.
Q: Can I use compatible SFP/SFP+ module on Huawei S5720 switch?
A:Yes, but the switch may generate alarm, however, it will not affect normal use.
Q: Can I get technical support from Thunder-link.com if we purchase S5720-36C-PWR-EI-DC from you?
A: Yes, Thunder-link.com has experienced technical team on Huawei switches, however, you may need to purchase technical support service from us as by default we only provide one year hardware warranty.
Huawei S5720-36C-PWR-EI-DC switch with 24-port 1000BASE-T PoE+, 4-port 1000BASE-T PoE+ & 1000BASE-X, 4-port 10GE SFP+, 2 power slots, 1 AC power module equipped, 1 extension slots(0 条用户评价) | 0