Huawei S6720-50L-HI-48S switch with 48-port 10GE SFP+, 2-port 40GE/100GE QSFP28, 4-port 40GE QSFP+, 2 power slots, without power module equipped
in stock inquire lead time
Authorized Partner x
Authorized Partner guaranteed or sourced from officially recognized partner. Chassis and modules come with 1 year warranty.
Original New Sealed x
Original, new and sealed switch; original packaging with seal; won't unpack the product without permission (insert the power module or replace the power supply cable).
Forwarding perfomance: 420Mpps
Switching capacity: 2.56Tbps
With 2 power slots, without power module
No extension slots
64K MAC address entries
Applicable power module: PDC-350WA-B (350 W DC Power Module); PAC-600WA-B (600 W AC Power Module)
S6720-HI series full-featured 10 GE routing switches are Huawei’s first IDN-ready fixed switches that provide 10 GE downlink ports and 40 GE/100 GE uplink ports.
S6720-HI series switches provide native AC capabilities and can manage 1K APs. They provide a free mobility function to ensure a consistent user experience and are VXLAN capable of implementing network virtualization. S6720-HI series switches also provide built-in security probes and support abnormal traffic detection, Encrypted Communications Analytics (ECA), and network-wide threat deception. The S6720-HI is ideal for enterprise campuses, carriers, higher education institutions, and governments.
Table 1 S6720-50L-HI-48S Similar Ports Switches Comparison
Model | Fixed Ports | Switching Capacity | Forwarding Capacity | RTU License |
S6730-H48X6C | 48-port 10GE SFP+,6-port 40GE/100GE QSFP28 | 2.16Tbps/2.4Tbps | 490Mpps | Yes, 40G to 100G License |
S6720-50L-HI-48S | 48-port 10GE SFP+,2-port 40GE/100GE QSFP28,4-port 40GE QSFP+ | 2.56Tbps | 420Mpps | No |
S6720-54C-EI-48S-AC S6720-54C-EI-48S-DC |
48-port 10GE SFP+,2-port 40GE QSFP+ | 2.56 Tbps | 1080Mpps | No |
S6720-52X-PWH-SI | 48-port PoE++ 100M/1000M/2.5GE/5GE/10GE BASE-T(MultiGE port),4-port 10GE SFP+ | 2.56 Tbit/s | 480 Mpps | No |
S6720-56C-PWH-SI S6720-56C-PWH-SI-AC |
32-port 1000 Base-T,16-port multi-gigabit Base-T, 4-port 10 GE SFP+ | 2.56 Tbit/s | 240 mpps | No |
Table 2 S6720-50L-HI-48S applicable modules and cables recommended for you
Model | Description |
GE SFP Copper Modules | |
SFP-1000BaseT | Electrical Transceiver,SFP,GE,1000BASE-T RJ45 0.1km |
GE eSFP Optical Modules | |
eSFP-GE-SX-MM850 | Optical Transceiver,GE, eSFP 1000BASE-SX MMF 0.1km 850nm LC |
OGSC10DD0/SFP-GE-LX-SM1310 | Optical Transceiver,GE, eSFP1000BASE-LX10/LH SMF 10km 1310nm LC |
OGSC40DD0/SFP-GE-EX-C | Optical Transceiver,GE, eSFP 1000BASE-EX SMF 40km 1310nm LC |
S-SFP-GE-LH40-SM1550 | Optical Transceiver,GE, eSFP SMF 40km 1550nm LC |
10GE SFP+ Optical Modules | |
SFP-10G-SR/SFP-10G-SR-C | Optical Transceiver,SFP+,10GBASE-SR MMF 0.3km 850nm LC |
OSX010000 | Optical Transceiver,SFP+,10G SMF 10km 1310nm LC |
OSX040N01 | Optical Transceiver,SFP+,10GBASE-ER SMF 40km 1550nm LC |
SFP-10G-CU1M | 1m 10G SFP+ high-speed copper cable |
SFP-10G-CU3M | 3m 10G SFP+ high-speed copper cable |
SFP-10G-CU5M | 5m 10G SFP+ high-speed copper cable |
SFP-10G-AC10M | 10m 10G SFP+ high-speed copper cable |
SFP-10G-AOC3M | 3m 10G SFP+ AOC cable |
SFP-10G-AOC10M | 10m 10G SFP+ AOC cable |
40GE QSFP+ Optical Modules (QSFP-100G-ER4 not supported) | |
QSFP-40G-eSR4 | Optical Transceiver,QSFP+,40GBASE-eSR4 MMF 0.3km 850nm MPO/PC |
QSFP-40G-LR4 | Optical Transceiver,QSFP+,40GBASE-LR4 SMF 10km 1310nm LC |
QSFP-40G-eSM4 | Optical Transceiver,QSFP+,40GBASE-eSM4 SMF 10km 1310nm MPO/APC |
QSFP-40G-CU1M | 1m 40G QSFP+ to QSFP+ high-speed copper cable |
QSFP-40G-CU3M | 3m 40G QSFP+ to QSFP+ high-speed copper cable |
QSFP-40G-CU5M | 5m 40G QSFP+ to QSFP+ high-speed copper cable |
QSFP-4SFP10G-CU1M | 1m 40G QSFP+ to 4*SFP+ high-speed copper cable |
QSFP-4SFP10G-CU3M | 3m 40G QSFP+ to 4*SFP+ high-speed copper cable |
QSFP-4SFP10G-CU5M | 5m 40G QSFP+ to 4*SFP+ high-speed copper cable |
QSFP-H40G-AOC10M | 10m 40G QSFP+ to QSFP+ AOC cable |
QSFP-4SFP10-AOC10M | 10m 40G QSFP+ to 4*SFP+ AOC cable |
100GE QSFP28 Optical Modules | |
QSFP-100G-eSR4 | Optical Transceiver,QSFP28,100GBase-eSR4 MMF 0.3km 850nm MPO/PC |
QSFP28-100G-LR4/QSFP28-100G-10KM | Optical Transceiver,QSFP28,100GBASE-LR4 SMF 10km 1310nm LC |
QSFP-100G-ER4 | Optical Transceiver,QSFP28,100GBASE-ER4 SMF 40km 1310nm LC |
QSFP28-100G-CU1M | 1m 100G QSFP28 to QSFP28 high-speed copper cable |
QSFP28-100G-CU3M | 3m 100G QSFP28 to QSFP28 high-speed copper cable |
QSFP28-100G-CU5M | 5m 100G QSFP28 to QSFP28 high-speed copper cable |
QSFP-100G-AOC-5M | 5m 100G QSFP28 to QSFP28 AOC cable |
QSFP-100G-AOC-10M | 10m 100G QSFP28 to QSFP28 AOC cable |
Specification | |
Fixed port | 48-port 10GE SFP+, 2-port 40GE/100GE QSFP28, 4-port 40GE QSFP+ |
MAC address table | 64K MAC address entries IEEE 802.1d standards compliance MAC address learning and aging Static, dynamic, and blackhole MAC address entries Packet filtering based on source MAC addresses |
VLAN | 4K VLANs Guest VLANs and voice VLANs GVRP MUX VLAN VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports VLAN mapping |
IP routing | Static routes, RIP v1/2, RIPng, OSPF, OSPFv3, IS-IS, IS-ISv6, BGP, BGP4+, ECMP, routing policy |
Interoperability | VLAN-Based Spanning Tree (VBST), working with PVST, PVST+, and RPVST Link-type Negotiation Protocol (LNP), similar to DTP VLAN Central Management Protocol (VCMP), similar to VTP |
Wireless Service | AP access control, AP domain management, and AP configuration template management Radio management, unified static configuration, and dynamic centralized management WLAN basic services, QoS, security, and user management CAPWAP, tag/terminal location, and spectrum analysis |
Ethernet Loop Protection | RRPP ring topology and RRPP multi-instance Smart Link tree topology and Smart Link multi-instance, providing millisecond-level protection switchover SEP ERPS (G.8032) BFD for OSPF, BFD for IS-IS, BFD for VRRP, and BFD for PIM STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s) BPDU protection, root protection, and loop protection |
MPLS | MPLS L3VPN MPLS L2VPN (VPWS/VPLS) MPLS-TE MPLS QoS |
IPv6 Features | Neighbor Discover (ND) PMTU IPv6 Ping, IPv6 Tracert, IPv6 Telnet ACLs based on source IPv6 addresses, destination IPv6 addresses, Layer 4 ports, or protocol types Multicast Listener Discovery snooping (MLDv1/v2) IPv6 addresses configured for sub-interfaces, VRRP6, DHCPv6, and L3VPN |
Multicast | IGMP v1/v2/v3 snooping and IGMP fast leave Multicast forwarding in a VLAN and multicast replication between VLANs Multicast load balancing among member ports of a trunk Controllable multicast Port-based multicast traffic statistics IGMP v1/v2/v3, PIM-SM, PIM-DM, and PIM-SSM MSDP Multicast VPN |
QoS/ACL | Rate limiting in the inbound and outbound directions of a port Packet redirection Port-based traffic policing and two-rate three-color CAR HQoS Eight queues on each port DRR, SP, and DRR+SP queue scheduling algorithms WRED Re-marking of the 802.1p and DSCP fields of packets Packet filtering at Layer 2 to Layer 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination IP address, TCP/UDP source/destination port number, protocol type, and VLAN ID Queue-based rate limiting and shaping on ports |
Security | Hierarchical user management and password protection DoS attack defense, ARP attack defense, and ICMP attack defense Binding of the IP address, MAC address, port number, and VLAN ID Port isolation, port security, and sticky MAC MAC Forced Forwarding (MFF) Blackhole MAC address entries Limit on the number of learned MAC addresses IEEE 802.1X authentication and limit on the number of users on a port AAA authentication, RADIUS authentication, and HWTACACS authentication NAC SSH V2.0 HTTPS CPU protection Blacklist and whitelist Attack source tracing and punishment for IPv6 packets such as ND, DHCPv6, and MLD packets IPSec for management packet encryption |
Reliability | LACP
E-trunk Ethernet OAM (IEEE 802.3ah and IEEE 802.1ag) ITU-Y.1731 DLDP LLDP BFD for BGP, BFD for IS-IS, BFD for OSPF, BFD for static routes |
VXLAN | VXLAN functions, VXLAN L2 and L3 gateways, BGP EVPN VXLAN configuration using NETCONF/YANG |
SVF | Acting as the parent node to vertically virtualize downlink switches and APs as one device for management Two-layer client architecture ASs can be independently configured. Services not supported by templates can be configured on the parent node. Third-party devices allowed between SVF parent and clients |
iPCA | Marking service packets to obtain the packet loss ratio and number of lost packets in real time Measurement of the number of lost packets and packet loss ratio on networks and devices |
Management and Maintenance | Cloud-based management Virtual cable test SNMP v1/v2c/v3 RMON Web-based NMS System logs and alarms of different severities GVRP MUX VLAN 802.3az Energy Efficient Ethernet (EEE) NetStream Dying gasp upon power-off |
Dimensions (W x D x H) | 442 mm x 420 mm x 43.6 mm |
Input Voltage | AC:
Rated AC voltage: 100V to 240V; 50/60 Hz Max. AC voltage: 90V to 264V; 47–63 Hz DC: Rated DC power: –48V to 60V Max. DC voltage: –38.4V to 72V |
Maximum Power Consumption | 279W |
Power Consumption (30% Traffic Load) | 194W |
Operating Temperature | l 0m to 1,800m altitude: 0°C to 45°C
l 1,800m to 5,000m altitude: The operating temperature reduces by 1°C for each 220m increase in altitude. |
Relative Humidity | 5% to 95% (non-condensing) |
Heat Dissipation | Heat dissipation with fan, intelligent fan speed adjustment |
Part number | 02351MXN |
Weight | 11.0 kg |
---|---|
Dimensions | 71.5 × 56.5 × 23.0 cm |
PoE Type |
Non-PoE |
Features | |
Port |
48+ |
Rate |
100G, 10G, 40G |
Q: What is the difference between S6720-50L-HI-48S and S6720-54C-EI-48S?
A: S6720-50L-HI-48S can support 100G QSFP28 ports, and with 2 FANS, but have no extended slot; while S6720-54C-EI-48S has only 10G 40G ports, with 1 FAN, extended cards supported; For details, you can refer to above overview part.
Q: Can S6720-50L-HI-48S switch replace S6720-54C-EI-48S?
A: Yes, because these two models have almost same specifications, and they share same AC or DC power modules.
Q: Does S6720-50L-HI-48S switch need 100GE QSFP28 license to be upgraded to use 100GE port?
A: No,
For S6720 series switch | License is not required since its 40G/100G self-adaptive. |
For 6730 series switch | License is required since the default uplink port is 40GE, which needs to be upgraded to 100GE through the license. |
For CE series switch | License is not required since 40G or 100G/40G is for choice. |
As a global leading professional Huawei network hardware and solution provider, we have delivered Huawei, ZTE, Nokia, CISCO, Fiberhome, etc, equipment to 500+ customer groups in 90+ countries over the past 10 years. Know more
Strict 3-Level Quality Control procedure: 1st-Level inspection; 2nd-Level In-stock test; 3rd-Level 24-hour pre-delivery test to guarantee premium quality. Know more
What we offer to our customers is value rather than price. We enable customers to enjoy the benefit of our reliable delivery products and generate more value to the greatest extent. Know more
We provide customers with personalized and professional tech support by remote diagnosis, fault-location and troubleshooting. "We are here to help you instantly when you need it."
We continuously offer flexible payment methods such as Wire Transfer, Paypal, L/C, Western Union and Alipay, to help customer enjoy a more convenient shopping experience. Know more
We provide extensive document resources to guide our customers to targetly solve the problem they may meet. Know more
Our products come with 1-year warranty. Customers can ask for a repair, replacement or refund for a major product failure. Know more
We won't stop to develop rapid and cost effective shipping options, providing the excellent experience to our global customers. Know more
We offer not only network products but also network proposal, mainstream and cost-effective solution to assist customers eliminate the concerns.
Huawei S6720-50L-HI-48S switch with 48-port 10GE SFP+, 2-port 40GE/100GE QSFP28, 4-port 40GE QSFP+, 2 power slots, without power module equipped
Garfield
Jamaica
Port speed also works well.
Sualang
Singapore
We are in the process of setting up a test network involving Huawei switches. So far everything looks fine.
Wael
Germany
S6720 switch price is very high but performance is amazing too. Thanks for your discount:)
Cerda
Dominican Republic
S6720-50L-HI-48S-AC finally arrive at us, it last long time, but the box is brand-new and the switch packed very well, with the 10G SFP+ modules packed together.
Sundas
Australia
I have bought S6720 series switch many times from this trustworthy supplier.