![Icon [all products]](https://www.thunder-link.com/tl-content/uploads/2022/05/Icon-all-products-1.svg "Icon [all products]"){kind=icon}
All products
0 in stock Ready to ship
H561SCUB1
Huawei MA5600 super control unit board integrated with 2-port GE uplink port, RS-232 serial port
19
People watching this product now!
Hardware Compatibility
Hardware Compatibility x
Backed up by our experienced pre-sales support team, and volume documentation, to avoid purchasing incompatible hardware.
Hardware Tested
Hardware Tested x
In order to avoid hardware malfunction, each equipment will be strictly tested before delivery and the test report will be packed inside equipment and delivered together. Learn more
Software Compatibility
Software Compatibility x
Software compatibility test between active/standby system board, main control board and service board, mother/sub-card; system commissioning test to prevent all software conflicts.
What is Vectoring and Vectoring on Huawei DSLAM Device？
As mention for Huawei DSLAM device MA5616 MA5600 or MA5600T, many customers will check if it supports vectoring. What is vectoring, and which device and ADSL or VDSL service cards support vectoring? This article will explain and introduce vectoring of Huawei DSLAM.Description
Huawei MA5600 super control unit board, comes with 1xO2GS subboards
Provides two subboard ports
Support subboards O4GS, O2GS, O4FM, O2FM, E4GFA, M2GA, CKMA.
1 pieces O2GS (two GE optical ports) is configured by default.
SCUB is a control board of the MA5600 DSLAM. It controls the system and transmits services upstream to the IP network.
Tech Specs
| Front Pannel | |
| The front panel of the SCUB has indicators, interfaces and a bar code.
|
|
| Valid Slot | |
| MA5600: SCUB can be installed in slots 7 and 8. | |
| Power consumption | Typical: 23 W Static: 14 W Maximum: 32 W |
| Dimensions(mm) | 25.4 (W)x 372 (D) x 399.5(H) |
Additional information
| Weight | 3.0 kg |
|---|---|
| Dimensions | 50.0 × 33.0 × 8.0 cm |
| Features |
Hardware Compatibility, Hardware Tested, Software Compatibility |
Q&A
Q: What is the difference among subboards supported by SCUB?
A:
| Subboard | O4GS | O2GS | ||||
| Port | 4 GE optical ports | 2 GE optical ports | ||||
| Type of fiber | Multi-mode,LC | Single-mode,LC | Single-mode,LC | Multi-mode,LC | Single-mode,LC | Single-mode,LC |
| Wavelength(nm) | 850 | 1310 | 1550 | 850 | 1310 | 1550 |
| Reach(km) | 0.5 | 10 | 40 | 0.5 | 10 | 40 |
| Maximum output optical power(dBm) | -2.5 | -3 | 0 | -2.5 | -3 | 0 |
| Minimum output optical power(dBm) | -9.5 | -9 | -4 | -9.5 | -9 | -4 |
| Maximum receivesensitivity(dBm) | -17 | -20 | -22 | -17 | -20 | -22 |
| Subboard | O4FM | O2FM | ||||
| Port | Four FE optical ports | Two FE optical ports | ||||
| Type of fiber | Multi-mode,LC | Single-mode,LC | Single-mode,LC | Multi-mode,LC | Single-mode,LC | Single-mode,LC |
| Wavelength(nm) | 1310 | 1310 | 1310 | 1310 | 1310 | 1310 |
| Reach(km) | 2 | 15 | 40 | 2 | 15 | 40 |
| Maximum output optical power(dBm) | -14 | -8 | 0 | -14 | -8 | 0 |
| Minimum output optical power(dBm) | -19 | -15 | -5 | -19 | -15 | -5 |
| Maximum receivesensitivity(dBm) | -30 | -31 | -37 | -30 | -31 | -37 |
| Subboard | Port |
| E4GFA | Four GE/FE electrical ports |
| M2GA | Processes the MPLS services |
| CKMA | Works with the SCUK control board to provide the system with four channels of 19.440 MHz SDH line clock signals, four channels of 32.768 MHz TDM clock signals, and 8.000 kHz TDM frame synchronization signals. |
Q: The SCUB board is new or refurbished?
A: Yes, it is original new, not been used.
Q: What is the lead time for SCUB board?
A: In normal condition is 3-5 days, better to confirm with our sales team before your purchase.
Matching Products…
Reviews (0)
Why Thunder-link.com
Reviews
There are no reviews yet.