![Icon [all products]](https://www.thunder-link.com/tl-content/uploads/2022/05/Icon-all-products-1.svg "Icon [all products]"){kind=icon}
All products
16 in stock Ready to ship
H801SCUN
Huawei MA5683T MA5680T main control board integrated with 4-port GE optical uplink port
19
People watching this product now!
Firmware Upgrades
Firmware Upgrades x
Firmware upgrades allow our customers to utilize the latest features and security enhancements that simply make the devices to operate proficiently Learn more
Hardware Compatibility
Hardware Compatibility x
Backed up by our experienced pre-sales support team, and volume documentation, to avoid purchasing incompatible hardware.
Hardware Tested
Hardware Tested x
In order to avoid hardware malfunction, each equipment will be strictly tested before delivery and the test report will be packed inside equipment and delivered together. Learn more
Software Compatibility
Software Compatibility x
Software compatibility test between active/standby system board, main control board and service board, mother/sub-card; system commissioning test to prevent all software conflicts.
How to Upgrade Huawei MA5600T Series OLT
We take Huawei MA5680T as an example in this article to briefly elaborates the upgrade process of Huawei MA5608T / MA5680T / MA5683TDescription
Supports integrated optical copper access for GPON, P2P, xDSL, and voice services.
Supports 480 Gbit/s (active/standby mode), 960 Gbit/s (load sharing mode) switching capacity.
Supports active/standby mode and load sharing mode, doubling processing performance.
Supports ISSU, saving the upgrade interruption time.
Supports 1588v2, and 1588 ACR by working together with the H801CKMD daughter board.
Supports interfaces CON (RJ-45), ETH (RJ-45), ESC (RJ-45).
Supports Communication Interfaces TX0 RX0 to TX3 RX3 (4 x SFP GE ports).
SCUN is a main control card of Huawei OLT MA5680T, MA5683T; it is the core of the system control and service switching and aggregation. Provide 480G switching capacity (active/standby mode), MAX access 8192 subscribers. SCUN has two hardware versions, H801SCUN and H802SCUN, basically no difference between these two versions.
Tech Specs
| Front Pannel | |
|
|
|
| Specification | |
| LAN switch | 24 x 10GE + 4 x GE |
| Switching capacity | 480 Gbit/s (active/standby mode) 960 Gbit/s (load sharing mode) |
| Bandwidth per slot | 10 Gbit/s (active/standby mode) 20 Gbit/s (load sharing mode) |
| MAC address table | 32768 |
| Access user | 8192 |
| Multicast user | 8192 |
| Configurable multicast channel | 4096 |
| Concurrent multicast channel | 2000 |
| IPv4 routing table | 5120 |
| IPv6 routing table | 5120 |
| Service port | 32768 |
| ARP table | 8192 |
| ACL rule | 1024 |
| Maximum Frame Size | 2052 bytes. After jumbo frame function is enabled, a maximum of 9216 bytes can be supported. |
| VRF (L3 VPN) | Supported |
| Operating temperature | -25°C to +65°C |
| Power consumption | Static: 30 Maximum: 50 W |
| Mechanical Specification | |
| Dimensions(mm) | 25.40 (W)x 237.00 (D) x 395.40(H) |
| Weight(kg) | 0.5 |
Additional information
| Weight | 3.0 kg |
|---|---|
| Dimensions | 49.0 × 32.5 × 7.5 cm |
| Brand | |
| Features |
Firmware Upgrades, Hardware Compatibility, Hardware Tested, Software Compatibility |
Q&A
Q: What’s the difference among SCU boards?
A:
| Board | Access service |
Panel ports | Daughter board | Ethernet sync. |
D-CMTS | Built-in 2GB CF card | Centric management for GE remote extended subrack | Load share |
Temp reading highalarming |
| H801SCUB | Copper | 4 GE | H801FLBA H801CKMC H801CKMD |
No | No | No | No | No | Yes |
| H801SCUF | Optical copper |
4 GE | H801FLBA H801CKMC H801CKMD |
No | No | No | No | No | Yes |
| H801SCUL | Optical copper |
None | H801CKMC H801CKMD |
No | No | No | No | No | Yes |
| H801SCUN | Optical copper |
4 GE | H801FLBA H801CKMC H801CKMD H801M2XA |
No | No | No | Yes | Yes supported in V800R011C00 or later version | Yes |
| H802SCUN | Optical | 4 GE | H801FLBA H801CKMC H801CKMD H801M2XA version B |
No | No | No | Yes | Yes supported in V800R011C00 or later version | Yes |
| H801SCUK | Optical | 4 GE | H801FLBA H801CKMC H801CKMD H801M2XA version B |
No | No | No | Yes | Yes supported in V800R011C00 or later versions | Yes |
| H801SCUH | Optical | 4GE/10GE | No | Yes | No | Yes | No | Yes | Yes |
| H801SCUV | Optical | 4GE/10GE | No | Yes | Yes | Yes | Yes | No | Yes |
Q: What is the access User and Password of the SCUN?
A:
| SCUN | SCUH | |
| V8R16 or Previous Version | root/admin | root/admin |
| V8R17 | root/admin123 | root/admin123 |
Q: Can I use a SCUK board as the 1+1 redundancy?
A: No, you cannot. Although SCUN and SCUK have same specfications, but their inner softwares are different, so they cannot switchover with each other.
Q: Can I directly use the 4 GE uplink ports on SCUN to save cost of uplink board?
A: Yes, you can. But normally there are two SCUNs on an OLT, one is Active and the other is Standby, only uplink ports on the Active SCUN are useful.
Reviews (1)
1 review for H801SCUN
Why Thunder-link.com
lily
Germany
Service is good, it’s very patient for me no matter what I asked. Today, I receive the items, it’s very nice, and it is consistent with the description. Good!!!!