![Icon [all products]](https://www.thunder-link.com/tl-content/uploads/2022/05/Icon-all-products-1.svg "Icon [all products]"){kind=icon}
All products
0 in stock Ready to ship
SS48OI4(S-4.1,LC)
Huawei Metro 1000 1-port STM-4 622M optical interface board SS48OI4 equipped with 1 S-4.1 15km SFP module
19
People watching this product now!
Firmware Upgrades
Firmware Upgrades x
Firmware upgrades allow our customers to utilize the latest features and security enhancements that simply make the devices to operate proficiently Learn more
Hardware Compatibility
Hardware Compatibility x
Backed up by our experienced pre-sales support team, and volume documentation, to avoid purchasing incompatible hardware.
Hardware Tested
Hardware Tested x
In order to avoid hardware malfunction, each equipment will be strictly tested before delivery and the test report will be packed inside equipment and delivered together. Learn more
Software Compatibility
Software Compatibility x
Software compatibility test between active/standby system board, main control board and service board, mother/sub-card; system commissioning test to prevent all software conflicts.
Huawei OSN 3500 System Test Procedure
In this document, we will show you how thunder-link.com tests SDH equipment product boards.Description
1xSTM-4 Optical Interface Board(S-4.1,LC)
Apply to Huawei Metro 1000 to transmit/receive 1xSTM-4 optical signals, at Max distance 15km.
The boards that have optical interfaces of the same type can be substituted with each other.
Provides the automatic laser shutdown (ALS) function.
The optical interface supports the function of setting the on/off state of a laser.
Supports the processing of the VC-12, VC-3, and VC-4 services.
Processes higher order path overheads.
Supports the setting of K-byte reporting, K-byte transmitting, and Kbyte passing-through.
Support the transparent data communication channel (DCC) and orderwire byte channel.
Supports the setting and querying of the J0/J1/C2 byte.
Supports the multiplex section protection (MSP) in slots IU1, IU2, andIU5.
Supports the sub-network connection protection (SNCP).
Supports inloop and outloop at optical interfaces.
Supports inloop and outloop on VC-4 paths so that faults can be located quickly.
Supports the setting of the overhead byte to be sent/received.
Supports setting of enabled state of synchronization status message (SSM) on line optical interface.
Supports the pass-through test of the line K bytes.
Supports the setting of the bit error threshold-crossing values and degrade thresholds.
Provides the ALS function.
SS48OI4(S-4.1,LC) is a 1-port STM-4 optical interface board, can be used on Huawei Metro1000. SS48OI4(S-4.1,LC) part number is 03051308, model name is SS48OI402. SS48OI4(S-4.1,LC) comes with 1 unit S-4.1 SFP module, transmission distance is 15km. SFP module is swappable to perform different transmission distance.
Tech Specs
| Valid Slot | ||
| The SS48OI4(S-4.1,LC) can be installed in slot IU1, IU2, or IU3 in the Metro 1000 subrack. | ||
| Optical Interface Parameter | ||
| Nominal bit rate | 622.08 Mbit/s | |
| Line code pattern | NRZ | |
| Application code | S-4.1 | |
| Maximum transmission distance(km) | 15 | |
| Type of fiber | Single-mode LC | |
| Operating wavelength(nm) | 1310 | |
| Launched optical power range (dBm) | –15 to –8 | |
| Receiver sensitivity (dBm) | -28 | |
| Power consumption (W) | 9 | |
| Mechanical Specifications | ||
| Dimensions (mm) | 89.0 (W) x 218.5 (D) x 24.0 (H) | |
| Weight (kg) | 0.2 | |
Additional information
| Weight | 2.0 kg |
|---|---|
| Dimensions | 18.7 × 34.0 × 7.5 cm |
| Port |
1 |
| Features |
Firmware Upgrades, Hardware Compatibility, Hardware Tested, Software Compatibility |
| Rate |
STM-4 |
Q&A
Q: What’s the difference between different functional versions?
A: The OI4 is available in two functional versions, namely, SS42, SS44, SS48, and SS49. The differences are as below:
- SS42OI4 and SS44OI4 use SC optical interface and support optical interfaces of Ie-4, S-4.1, L-4.1, and L-4.2 types.
- SS48OI4 and SS49OI4 use SFP optical interface and support optical interfaces of the S-4.1, L-4.1, and L-4.2 types.
Q: What is the board substitution relation among different versions?
A: The boards that have the optical interfaces of the same type can be substituted with each other.
Q: What is the difference between different function codes?
A:
| Board | Feature Code | Optical Interface | Transmission Distance(km) |
| SS48OI402 | 02 | S-4.1 | 15 |
| SS48OI403 | 03 | L-4.1 | 40 |
| SS48OI404 | 04 | L-4.2 | 80 |
Q: Can I change SFP module to reach longer transmission distance?
A: Yes, you can, please contact thunder-link.com sales team, for available SFP module and cost.
Q: Can I equip different specification SFP module on different port, to perform different transmission distance for each port?
A: Yes, you can, but that not recommended.
Q: Can I use compatible SFP module on SS48OI4(S-4.1,LC) board?
A: Yes, you can, the board might generate alarm, but it won’t affect use.
Q: Can I return/exchange board if not compatible with my system?
A: Yes, please tell our sales team your system and main control board version, before your purchase.
Q: The board is new or refurbished?
A: Yes, it is original new, not been used.
Q: Do you sell SFP module separately?
A: Yes, we do.
Q: What is the lead time for SS48OI4(S-4.1,LC) board?
A: In normal condition is 5 days, better to confirm with our sales team before your purchase.
Reviews (0)
Why Thunder-link.com
Reviews
There are no reviews yet.