![Icon [all products]](https://www.thunder-link.com/tl-content/uploads/2022/05/Icon-all-products-1.svg "Icon [all products]"){kind=icon}
All products
2 in stock 3-5 days lead time
SSN1EAS2
Huawei OSN3500 7500 2-port 10G Ethernet Processing Board SSN1EAS2
15
People watching this product now!
Firmware Upgrades
Firmware Upgrades x
Firmware upgrades allow our customers to utilize the latest features and security enhancements that simply make the devices to operate proficiently Learn more
Hardware Compatibility
Hardware Compatibility x
Backed up by our experienced pre-sales support team, and volume documentation, to avoid purchasing incompatible hardware.
Hardware Tested
Hardware Tested x
In order to avoid hardware malfunction, each equipment will be strictly tested before delivery and the test report will be packed inside equipment and delivered together. Learn more
Software Compatibility
Software Compatibility x
Software compatibility test between active/standby system board, main control board and service board, mother/sub-card; system commissioning test to prevent all software conflicts.
Huawei OSN 3500 System Test Procedure
In this document, we will show you how thunder-link.com tests SDH equipment product boards.Description
SSN1EAS2 2-port 10GE Ethernet Processing Board with LAN Switch, apply to Huawei OSN3500, OSN7500
Supports 10GBASE-LR and 10GBASE-LW Ethernet optical ports, which comply with IEEE 802.3ae.
Supports Non-autonegotiation mode.
Supports Query/Setting of port status and Query of port types.
Not supports Setting of optical power thresholds.
Supports XFP optical modules.
Supports PORT-based transparent transmission.
Supports PORT-shared EVPL services.
Supports VCTRUNK-shared EVPL services.
Supports a maximum of 2048 links.
Supports a maximum of one virtual bridge (VB) on N1EAS2 boards.
Supports blacklist that can contain 512 records.
Supports static media access control (MAC) address table that can contain 512 records.
Supports the self-learning of the source MAC address.
Supports the configuration of static MAC routes.
Supports the query of the aging time of an MAC address.
Supports the query of learned MAC addresses by VB+VLAN or VB+LP.
Supports EPLAN services that are based on IEEE 802.1d MAC bridges.
Supports EVPLAN services that use stack VLAN encapsulation.
Supports data isolation based on VB+VLAN.
Supports EVPLAN services based on IEEE 802.1q virtual bridges and IEEE 802.1ad provider bridges.
Supports IEEE 802.3,Ethernet II, IEEE 802.1 q/p.
Supports the setting of the frame length to a value ranging from 1518 bytes to 9600 bytes.
Supports a jumbo frame with a maximum length of 9600 bytes.
Supports bound bandwidth 64xVC-4 or 192xVC-3.
Supports VC-4-Xv (X≤8), VC-3-Xv (X≤24), and VC-4-4c concatenation granularities.
Supports a total number of 4094 VLANs, which comply with IEEE 802.1q/p.
Supports a maximum of 10 Gbit/s upstream bandwidth and can adapt to the bandwidth of its slot.
Supports a maximum of 24 VCTRUNKs.
Not supports TPS,BPS,PPS,MSTP,ERPS; supports DLAG.
Supports manual link aggregation and static link aggregation.
Supports the load sharing mode and load non-sharing mode.
Supports P2P LPT P2MP LPTand LCAS in compliance with ITU-T G.7042.
Supports the broadcast packet suppression function and RSTP, which comply with IEEE 802.1w.
Supports the port-based traffic control function that complies with IEEE 802.3x.
SSN1EAS2 is a 2-port 10 GE Ethernet services board, can be used on Huawei OSN3500, OSN7500. SSN1EAS part number is 03051791. SSN1EAS2 comes with 2 units 10GBASE-LR (LAN) XFP module, transmission distance is 10km. XFP module is swappable to perform different transmission distance.
Tech Specs
| Front Panel | ||
|
|
||
| Valid Slot | ||
| OSN 3500: The SSN1EAS2 can be installed in slots 5-8 and 11-14.
OSN 7500: The SSN1EAS2 can be installed in slots 1-8, 11-18, and 26-31 |
||
| Optical Interface Parameter | ||
| Transmission rate | 10.3125 Gbit/s or 9.953 Gbit/s | |
| Processing capability | 2x10GE signals | |
| Type of optical interface | 10GBASE-LR/LW | |
| Type of fiber | Single-mode LC | |
| Transmission distance (km) | 10 | |
| Operating wavelength range (nm) | 1290 to 1330 | |
| Maximum mean launched power (dBm) | -1 | |
| Minimum mean launched power (dBm) | -6 | |
| Receiver sensitivity (dBm) | -11 | |
| Minimum extinction ratio (dB) | 6 | |
| Connector type | LC | |
| Maximum -20 dB spectral width (nm) | 1 | |
| Minimum side mode suppression ratio (dB) | 30 | |
| Mechanical Specifications | ||
| Dimensions (mm) | 25.4 (W) x 235.2 (D) x 261.4 (H) | |
| Weight (kg) | 1.2 | |
Additional information
| Weight | 3.0 kg |
|---|---|
| Dimensions | 37.5 × 34.0 × 7.5 cm |
| Port |
2 |
| Features |
Firmware Upgrades, Hardware Compatibility, Hardware Tested, Software Compatibility |
| Rate |
10G |
Q&A
Q: What’s the difference between different functional versions?
A: The EAS2 is available in the following functional versions: N1 and N3. Differences are as below:
| N1 | N3 | |
| ERPS function | Not supported | Supported |
| One-fiber bidirectional optical modules | Not supported | Supported |
| Pluggable optical module | XFP optical module | SFP+ optical module |
| Ethernet virtual private line (EVPL) service | Supports a maximum of 2048 link | Supports a maximum of 4096 |
| Bound bandwidth | 64xVC-4 or 192xVC-3 | 128xVC-4 |
| MPLS technology | Not supported | Supported |
| Maximum uplink bandwidth | Supports a maximum of 10 Gbit/s | Supports a maximum of 20 Gbit/s |
| MSTP | Not supported | Supported |
| ERPS | Not supported | Supported |
Q: What is the feature code of EAS2?
A: EAS2 has no feature code.
Q: Can I change XFP module to reach longer transmission distance?
A: Yes, you can, please contact thunder-link.com sales team, for available XFP module and cost.
Q: Can I equip different specification XFP module on different port, to perform different transmission distance for each port?
A: Yes, you can, but that not recommended.
Q: Can I use compatible XFP module on SSN1EAS2 board?
A: Yes, you can, the board might generate alarm, but it won’t affect use.
Q: Can I return/exchange board if not compatible with my system?
A: Yes, please tell our sales team your system and main control board version, before your purchase.
Q: The board is new or refurbished?
A: Yes, it is original new, not been used.
Q: Do you sell XFP module separately?
A: Yes, we do.
Q: What is the lead time for SSN1EAS2 board?
A: In normal condition is 5 days, better to confirm with our sales team before your purchase.
Reviews (6)
6 reviews for SSN1EAS2
Why Thunder-link.com
Joaquin
EAS2 is very hard to come by. After searching for days, I finally found it at Thunder-link.com.
Schmidt
Chile
Great repeat vendor and fair prices.
Garcia
Chile
I was satisfied when I saw it
Ivaylo
Bulgaria
Can EAS2 convert from SDH to Ethernet?
Onopriychuk
Russia
ERPS function is supported on EAS2?
Kjenslie
Bhutan
This time we purchased 1pcs EAS2 to realise 10GE service on OSN3500, very urgent to use it, even the price is very high we have no choice, in the future, we considering does OSN3500 have other board for 10GE service?