SSN1EFS0A

SSND0EFS0A01 16-ports 10/100M Fast Ethernet Processing Board with LAN Switch, apply to Huawei OSN1500B, OSN2500, OSN3500, OSN7500.

Working together with SSN1ETF8 to provide 8xRJ45 interface, working with SSN1EFF8 to provide 8xFE SFP interface.

Maximum uplink bandwidth is 2.5 Gbit/s.

Processes 16xFE services.

Supports 10BASE-T/100BASE-TX signals when working with an ETF8 board.

Supports Query/Setting of port status and Query of port types.

Supports PORT-based transparent transmission.

Supports PORT-shared EVPL services.

Supports VCTRUNK-shared EVPL services which are isolated by VLAN and MPLS tags.

Supports a maximum of 4096 links.

Supports blacklist that can contain 2K records and also static MAC address table that can contain 2K records.

Supports self-learning of the source MAC address. Capacity of the MAC address table is 16K.

Supports the configuration of static MAC routes.

Supports the query of dynamic MAC addresses.

Maximum number of supported VBs is 16. Maximum number of logical ports for each VB is 48.

Supports the EPLAN services that are based on the IEEE 802.1d MAC bridge.

Supports data isolation based on VB+VLAN.

Maximum number of supported VBs is 16. Maximum number of logical ports for each VB is 48.

Supports the setting of a maximum of 4096 VLAN services.

Supports EVPLAN services that are based on IEEE 802.1q virtual bridge and IEEE 802.1ad provider bridge.

Supports IEEE 802.3, Ethernet II, IEEE 802.1 q/p Formats of Ethernet data frames.

Supports the setting of the frame length to a value ranging from 1518 bytes to 9600 bytes.

Supports a jumbo frame with a maximum length of 9600 bytes.

Supports 48xVC-3, or 252xVC-12 + 36xVC-3 bound bandwidth.

Supports CFP-F, not supports HDLC, LAPS encapsulation.

Supports the MPLS.

Supports a total number of 4094 VLANs, which comply with IEEE 802.1q/p.

Supports TPS, not supports BPS, PPS, DLAG protection schemes.

Supports manual link aggregation and load sharing mode that comply with IEEE 802.3ad and IEEE 802.1AX.

Supports LCAS, which dynamically increases/decreases bandwidth and protects bandwidth comply withITU-T G.7042.

Supports P2P LPT and P2MP LPT in compliance with ITU-T G.7042

Supports broadcast packet suppression function and RSTP, which comply with IEEE 802.1w.

Not supported Synchronous Ethernet, IEEE 1588v2.

Supports CC, LB tests, and LT tests in compliance with IEEE 802.1ag.

Supports OAM ping in compliance with Huawei proprietary protocol.

Supports OAM auto-discovery, remote loopbacks, fault detection, and link performance detection comply with IEEE 802.3ah.

Supports selfloop detection in compliance with Huawei proprietary protocol.

Supports test frames in ETH and GFP bearer modes.

Supports RMON of the Ethernet performance of Ethernet ports.

Supports the CAR. The granularity is 64 kbit/s.

Supports flow classification based on PORT, PORT+VLAN ID, PORT+SVLAN ID, or PORT+VLAN ID+VLAN PRI.

Supports Protocol enabling, Port aging time.

Not supports Fast leave, Discarding of unknown broadcast packets, Static broadcast entry IGMP snooping.

Supports the port-based traffic control function that complies with IEEE 802.3x.

Supports port-based and VCTRUNK-based traffic monitoring.

 

SSN1EFS0A is a 16-ports FE service processing board, can be used on Huawei OSN1500B, OSN2500, OSN3500, OSN7500. SSN1EFT8 part number is 03020KHQ, model name is SSND0EFS0A. SSN1EFS0A does’t have interface on the front panel, and it must work with 2 pieces of SSN1ETF8 to provide 16 FE electrical interface, or with 2 pieces SSN1EFF8 to provide 16 FE optical interface.