Huawei OSN1500 2500 3500 7500 16-ports 10/100M Fast Ethernet Processing Board SSND0EFS0A01 with SSN1EFF8 interface
in stock Ready to ship
Firmware Upgrades x
Firmware upgrades allow our customers to utilize the latest features and security enhancements that simply make the devices to operate proficiently Learn more
Hardware Compatibility x
Backed up by our experienced pre-sales support team, and volume documentation, to avoid purchasing incompatible hardware.
Hardware Tested x
In order to avoid hardware malfunction, each equipment will be strictly tested before delivery and the test report will be packed inside equipment and delivered together. Learn more
Software Compatibility x
Software compatibility test between active/standby system board, main control board and service board, mother/sub-card; system commissioning test to prevent all software conflicts.
SSND0EFS0A01 16-ports 10/100M Fast Ethernet Processing Board with LAN Switch, apply to Huawei OSN1500B, OSN2500, OSN3500, OSN7500.
Working with SSN1EFF8 to provide 8xFE SFP interface.
Maximum uplink bandwidth is 2.5 Gbit/s.
Processes 16xFE services.
Supports 100BASE-FX signals when working with EFF8 board., the optical ports comply with IEEE 802.3u.
Supports Query/Setting of port status and Query of port types.
Supports PORT-based transparent transmission.
Supports PORT-shared EVPL services.
Supports VCTRUNK-shared EVPL services, the service are isolated by VLAN and MPLS tags.
Supports a maximum of 4096 links.
Supports blacklist that can contain 2K records also static MAC address table that can contain 2K records.
Supports self-learning of source MAC address. Capacity of MAC address table is 16K.
Supports the configuration of static MAC routes.
Supports the query of dynamic MAC addresses.
The maximum number of supported VBs is 16. Maximum number of logical ports for each VB is 48.
Supports the EPLAN services that are based on the IEEE 802.1d MAC bridge.
Supports data isolation based on VB+VLAN.
Maximum number of supported VBs is 16. Maximum number of logical ports for each VB is 48.
Supports the setting of a maximum of 4096 VLAN services.
Supports EVPLAN services that are based on the IEEE 802.1q virtual bridge and IEEE 802.1ad provider bridge.
Supports IEEE 802.3, Ethernet II, IEEE 802.1 q/p Formats of Ethernet data frames.
Supports the setting of the frame length to a value ranging from 1518 bytes to 9600 bytes.
Supports a jumbo frame with a maximum length of 9600 bytes.
Supports 48xVC-3, or 252xVC-12 + 36xVC-3 bound bandwidth.
Supports CFP-F, not supports HDLC, LAPS encapsulation.
Supports the MPLS.
Supports a total number of 4094 VLANs, which comply with IEEE 802.1q/p.
Supports TPS, not supports BPS, PPS, DLAG protection schemes.
Supports manual link aggregation and load sharing mode that comply with IEEE 802.3ad and IEEE 802.1AX.
Supports LCAS, which dynamically increases/decreases bandwidth and protects bandwidth comply with ITU-T G.7042.
Supports P2P LPT and P2MP LPT in compliance with ITU-T G.7042
Supports broadcast packet suppression function and RSTP, which comply with IEEE 802.1w.
Not supported Synchronous Ethernet, IEEE 1588v2.
Supports CC, LB, LT tests complye with IEEE 802.1ag, and OAM ping comply with Huawei proprietary protocol.
Supports OAM auto-discovery, remote loopbacks, fault detection link performance detection comply with IEEE 802.3ah.
Supports selfloop detection in compliance with Huawei proprietary protocol.
Supports test frames in ETH and GFP bearer modes.
Supports RMON of the Ethernet performance of Ethernet ports.
Supports the CAR. The granularity is 64 kbit/s.
Supports the flow classification based on PORT, PORT+VLAN ID, PORT+SVLAN ID, or PORT+VLAN ID+VLAN PRI.
Supports Protocol enabling, Port aging time.
Not supports Fast leave, Discarding of unknown broadcast packets, Static broadcast entry IGMP snooping.
Supports the port-based traffic control function that complies with IEEE 802.3x.
Supports port-based and VCTRUNK-based traffic monitoring.
SSN1EFS0A is a 16-ports FE service processing board, can be used on Huawei OSN1500B, OSN2500, OSN3500, OSN7500. SSN1EFT8 part number is 03020KHQ, model name is SSND0EFS0A. SSN1EFS0A does’t have interface on the front panel, and it must work with 2 pieces SSN1EFF8 to provide 16 FE optical interface or with 2 pieces of SSN1ETF8 to provide 16 FE electrical interface.
Front Panel of SSN1EFS0A | ||
The front panel of the SSN1EFS0A has indicators and a bar code. | ||
Front Panel of SSN1EFF8 | ||
The front panel of the SSN1EFF8 has indicators, interfaces, a bar code, and a laser safety class label. | ||
Valid Slot | ||
OSN 1500B: SSN1EFS0A can be installed in slots 12, 13.
OSN 2500: When cross-connect boards are CXLN and CXLLN, SSN1EFS0A can be installed in slots 6, 7, 12 and 13. OSN 3500: When cross-connect boards are GXCS,UXCS, FXCSA, IXCS, SXCA, SSN1EFS0A can be installed in slots 2–5 and 13–16. OSN 7500: SSN1EFS0A can be installed in slots 2, 3, 17, and 18. |
||
Optical Interface Parameter of SSN1EFF8 | ||
Parameter | Value | |
Nominal bit rate | 100 Mbit/s | |
Line code pattern | NRZI encoding signal (100M) | |
Type of optical interface | 1000BASE-LX | |
Type of fiber | Single-mode LC(15km) | |
Operating wavelength range (nm) | 1261 to 1360 | |
Launched optical power range (dBm) | -15 to -8 | |
Receiver sensitivity (dBm) | -28 | |
Minimum overload (dBm) | -8 | |
Minimum extinction ratio (dB) | 9 | |
Mechanical Specifications | ||
SSN1EFS0A | SSN1EFF8 | |
Dimensions (mm) | 25.4 (W) x 235.2 (D) x 261.4 (H) | 22.0 (W) x 125.2 (D) x 261.4 (H) |
Weight (kg) | 0.7 | 0.4 |
Weight | 3.0 kg |
---|---|
Dimensions | 37.5 × 34.0 × 7.5 cm |
Features |
Firmware Upgrades, Hardware Compatibility, Hardware Tested, Software Compatibility |
Rate |
FE |
Q: How many versions does the EFS0A have?
A: The EFS0A is available in one functional version, namely, N1.
Q: Can I return/exchange board if not compatible with my system?
A: Yes, please tell our sales team your system and main control board version, before your purchase.
Q: The board is new or refurbished?
A: Yes, it is original new, not been used.
Q: What is the lead time for SSN1EFS0A-EFF8 board?
A: In normal condition is 5 days, better to confirm with our sales team before your purchase.
As a global leading professional Huawei network hardware and solution provider, we have delivered Huawei, ZTE, Nokia, CISCO, Fiberhome, etc, equipment to 500+ customer groups in 90+ countries over the past 10 years. Know more
Strict 3-Level Quality Control procedure: 1st-Level inspection; 2nd-Level In-stock test; 3rd-Level 24-hour pre-delivery test to guarantee premium quality. Know more
What we offer to our customers is value rather than price. We enable customers to enjoy the benefit of our reliable delivery products and generate more value to the greatest extent. Know more
We provide customers with personalized and professional tech support by remote diagnosis, fault-location and troubleshooting. "We are here to help you instantly when you need it."
We continuously offer flexible payment methods such as Wire Transfer, Paypal, L/C, Western Union and Alipay, to help customer enjoy a more convenient shopping experience. Know more
We provide extensive document resources to guide our customers to targetly solve the problem they may meet. Know more
Our products come with 1-year warranty. Customers can ask for a repair, replacement or refund for a major product failure. Know more
We won't stop to develop rapid and cost effective shipping options, providing the excellent experience to our global customers. Know more
We offer not only network products but also network proposal, mainstream and cost-effective solution to assist customers eliminate the concerns.
Huawei OSN1500 2500 3500 7500 16-ports 10/100M Fast Ethernet Processing Board SSND0EFS0A01 with SSN1EFF8 interface
(0 reviews) | 0
Reviews
There are no reviews yet.