SSN1EFT8 8-ports 10/100M transparent transmission processing board, apply to Huawei OSN1500, OSN2500, OSN3500, OSN7500
Provides 16 electrical ports to receive/transmit Ethernet signals when working with an ETF8 board.
Maximum uplink bandwidth is 1.25 Gbit/s.
Can substitute for N2EFT8.
Supports 16VCTRUNKs.
Supports 10BASE-T/100BASE-TX signals. The electrical ports comply with IEEE 802.3u.
Supports 10BASE-T/100BASE-TX signals when working with an ETF8 board.
Supports Query /Setting of ports status, Query of port types.
Supports PORT-based transparent transmission.
Supports IEEE 802.3, Ethernet II, IEEE 802.1q TAG.
Support setting of the packet length, which ranges from 1518 bytes to 1535 bytes.
Ports 1-4 and 9-12 on the board support a jumbo frame with a maximum length of 6144 bytes.
Ports 5-8 and 13-16 support a jumbo frame with a maximum length of 9600 bytes.
Supports 24xVC-3, or 126xVC-12 + 18xVC-3 bound bandwidth.
Supports HDLC, LAPS, GFP-F encapsulation formats.
Not supported MPLS technology.
Supports VLAN transparent transmission.
Not supports TPS,LAG.
Supports LCAS, which dynamically increases/decreases bandwidth and protects bandwidth comply with ITU-T G.7042.
Supports P2P LPT, which complies with ITU-T G.7042.
Not supports Synchronous Ethernet, IEEE 1588v2.
Not support the ETH OAM function.
Supports test frames in GFP bearer mode.
Supports Ethernet performance monitoring at the port level.
Not supported QoS.
Supports the FE port-based traffic control function that complies with IEEE 802.3x.
SSN1EFT8 is a 8-ports FE service processing board, can be used on Huawei OSN1500B, OSN2500, OSN3500, OSN7500. SSN1EFT8 part number is 03037691, model name is SSN1EFT801. SSN1EFT8 has 8 interface on the front panel, and it can work with SSN1ETF8 to provide total 16 FE electrical interface, or with SSN1EFF8 to provide 8 FE optical interface and 8 FE electrical interface.





Adam
We received the product in perfect condition thanks to the careful packaging.