![Icon [all products]](https://www.thunder-link.com/tl-content/uploads/2022/05/Icon-all-products-1.svg "Icon [all products]"){kind=icon}
All products
in stock 3-5 days lead time
SSN1EGS4
Huawei OSN1500 2500 3500 7500 4-ports GE Fast Ethernet Processing Board SSN1EGS411
19
People watching this product now!
Firmware Upgrades
Firmware Upgrades x
Firmware upgrades allow our customers to utilize the latest features and security enhancements that simply make the devices to operate proficiently Learn more
Hardware Compatibility
Hardware Compatibility x
Backed up by our experienced pre-sales support team, and volume documentation, to avoid purchasing incompatible hardware.
Hardware Tested
Hardware Tested x
In order to avoid hardware malfunction, each equipment will be strictly tested before delivery and the test report will be packed inside equipment and delivered together. Learn more
Software Compatibility
Software Compatibility x
Software compatibility test between active/standby system board, main control board and service board, mother/sub-card; system commissioning test to prevent all software conflicts.
Huawei OSN 3500 System Test Procedure
In this document, we will show you how thunder-link.com tests SDH equipment product boards.Description
SSN1EGS4 4-ports GE transparent transmission processing board, apply to Huawei OSN1500, OSN2500, OSN3500, OSN7500
Supports the 1000BASE- LX Ethernet optical interfaces.
Support the auto-negotiation function in compliance with IEEE 802.3z.
Support the 1000BASE-T RJ-45 Ethernet electrical interface.
Supports the auto-negotiation function.
Supports the negotiated rate of 1000 Mbit/s.
Support query/setting of port status, query of interface types, PMON measurement.
Supports PORT-based transparent transmission.
Supports EVPL services based on PORT+VLAN.
Supports a maximum of 4000 services that are received/transmitted through IP ports.
Supports a maximum of 4000 services that are received/transmitted through VCTRUNKs.
Supports a maximum of 8000 links.
Supports QinQ-based EVPL services.
Supports PORT-based service forwarding.
Supports the Layer 2 forwarding function.
Supports switching on the client and SDH sides.
Supports blacklist that contain 512 records, static MAC address table contain 512 records.
Supports the self-learning of the source MAC address.
MAC address table capacity is 128K. Aging time of the MAC address can be set and queried.
Supports the configuration of the static MAC route.
Supports creation, deletion, and query of VB. SSN1EGS4 supports a maximum of two VBs.
Supports the EPLAN services that are based on the IEEE 802.1d MAC bridge.
Supports data isolation based on VB+VLAN.
Supports the setting of a maximum of 4000 VLAN services.
Supports EVPLAN services that based on IEEE 802.1q virtual bridge and IEEE 802.1ad provider bridge.
Support IEEE 802.3, Ethernet II, IEEE 802.1 q/p.
Supports the frame with a length ranging from 64 bytes to 9216 bytes.
Supports the Jumbo frame with a length less than 9216 bytes.
Supports setting of the packet length, which ranges from 1518 bytes to 9216 bytes.
Supports 16xVC-4, or 48xVC-3, or 1008xVC-12 bound bandwidth.
Support HDLC, LAPS, GFP-F encapsulation formats; MPLS not supported.
Supports VLAN and QinQ, and supports addition, deletion, and exchanging of VLAN tags.
Supports 4096 S-VLANs (0–4095) and 4096 C-VLANs (0–4095) in the case of QinQ services.
Supports 4095 VLANs (1–4095) in the case of EVPL services.
Support BPS, PPS, DLAG protection schemes, TPS not supported.
Supports manual link aggregation and static link aggregation.
Supports the load sharing mode and load non-sharing mode.
Supports dynamically increases/decreases bandwidth and protects bandwidth comply with ITU-T G.7042.
Supports the P2P LPT and the P2MP LPT.
Supports the RSTP, which complies with IEEE 802.1w.
Not support Synchronous Ethernet, IEEE 1588v2 Clock synchronization.
Supports CC and LB test, which comply with IEEE 802.1ag. (N1/3)
Supports OAM auto-discovery, remote loopback, fault diagnosis in compliance with IEEE 802.3ah.
Supports link performance monitoring and self-loop test in compliance with IEEE 802.3ah.
Supports test frames in GFP bearer mode.
Supports RMON of the Ethernet performance of Ethernet ports and VCTRUNKs.
Supports the CAR at 512 rate modes. The granularity is 64 kbit/s.
Supports flow classification based on PORT, PORT+VLAN, PORT+VLAN+PRI, or PORT+SVLAN.
Supports the IGMP snooping fast-leave function.
Supports the port-based traffic control function that complies with IEEE 802.3x.
SSN1EGS4 is a 4-ports GE optical interface board, can be used on Huawei OSN1500B, OSN 2500, OSN3500, OSN7500. SSN1EGS4 part number is 03051249, model name is SSN1EGS411. SSN1EGS4 comes with 4 units 1000BASE-LX SFP module, transmission distance is 10km. SFP module is swappable to perform different transmission distance.
Tech Specs
| Front Panel | ||
| The front panel of the SSN1EGS4 has indicators, interfaces, a bar code, and a laser safety class label.
|
||
| Valid Slot | ||
| OSN 1500B: SSN1EGS4 can be installed in slots 11–13.
OSN 2500: When cross-connect boards are CXLN&CXLLN, SSN1EGS4 can be installed in slots 5–8 and 11–13. OSN 3500: When cross-connect boards are GXCS&UXCS, SSN1EGS4 can be installed in slots 1-8 and 11-16. OSN 7500: SSN1EGS4 can be installed in slots 1–8, 11–18 and 26–31. |
||
| Feature Code | ||
| The number code that follows the board name in the bar code is the feature code of the board. The feature code of the SSN1EGS4 indicates the type of optical interface. | ||
| Board | Feature Code | Type of Optical Interface |
| SSN1EGS411 | 11 | 1000BASE-LX (10 km) |
| Optical Interface Parameter | ||
| Type of Optical Interface | 1000BASE-LX (10 km) | |
| Type of fiber | Single-mode LC | |
| Operating Wavelength range(nm) | 1270 to 1360 | |
| Launched optical power range (dBm) | -11 to -3 | |
| Receiver sensitivity (dBm) | -19 | |
| Minimum overload (dBm) | -3 | |
| Minimum extinction ratio (dB) | 9 | |
| Maximum -20 dB spectral width (nm) | – | |
| Minimum side mode suppression ratio (dB) | – | |
| Mechanical Specifications | ||
| Dimensions (mm) | 25.4 (W) x 220 (D) x 254.1 (H) | |
| Weight (kg) | 1.1 | |
Additional information
| Weight | 3.0 kg |
|---|---|
| Dimensions | 37.5 × 34.0 × 7.5 cm |
| Port |
4 |
| Features |
Firmware Upgrades, Hardware Compatibility, Hardware Tested, Software Compatibility |
| Rate |
GE |
Q&A
Q: What’s the difference between different functional versions?
A: EGS4 is available in three functional versions, namely, N1, N3 and N4. N4 version also called ND00 version. The N3EGS4 is discontinued. Differences are as below:
| N1 | N3 | N4 | |
| 1000BASE-T Ethernet electrical interface | Supported | Not supported | Supported |
| Bound bandwidth | 16xVC-4, or 48xVC-3, or 1008xVC-12 | 16xVC-4, or 48xVC-3, or 504xVC-12 | 16xVC-4, or 48xVC-3, or 504xVC-12 |
| Binding of VC-3&VC-12 paths | Not supported | Supported | Supported |
| MSTP | Supported | Not supported | Not supported |
| OAM Ping | Not supported | Not supported | Supported |
| Discarding of unknown broadcast packets | Not supported | Not supported | Supported |
| Fast leave | Not supported | Not supported | Supported |
| Traffic monitoring | Not supported | Not supported | Supported |
| QoS | Supported 512 rate mode | Supported 60 rate modes | Supported 60 rate modes |
| N4EGS4 supports the setting of modes and weights for scheduling queues. | |||
Q: What is the board substitution relation among different versions?
A: The N4EGS4 can substitute for the N3EGS4.
Q: What is the difference between different function codes?
A:
| Board | Feature Code | Optical Interface | Transmission Distance(km) |
| SSN4EGS410 | 10 | 1000BASE-SX | 0.5 |
| SSN4EGS411 | 11 | 1000BASE-LX | 10 |
| SSN4EGS412 | 12 | 1000BASE-VX | 40 |
| SSN4EGS413 | 13 | 1000BASE-ZX | 80 |
| SSN4EGS414 | 14 | 1000BASE-T | 100 |
Q: Can I change SFP module to reach longer transmission distance?
A: Yes, you can, please contact thunder-link.com sales team, for available SFP module and cost.
Q: Can I equip different specification SFP module on different port, to perform different transmission distance for each port?
A: Yes, you can, but that not recommended.
Q: Can I use compatible SFP module on SSN1EGS4 board?
A: Yes, you can, the board might generate alarm, but it won’t affect use.
Q: Can I return/exchange board if not compatible with my system?
A: Yes, please tell our sales team your system and main control board version, before your purchase.
Q: The board is new or refurbished?
A: Yes, it is original new, not been used.
Q: Do you sell SFP module separately?
A: Yes, we do.
Q: What is the lead time for SSN1EGS4 board?
A: In normal condition is 5 days, better to confirm with our sales team before your purchase.
Reviews (1)
1 review for SSN1EGS4
Why Thunder-link.com
10 Years Experience
As a global leading professional Huawei network hardware and solution provider, we have delivered Huawei, ZTE, Nokia, CISCO, Fiberhome, etc, equipment to 500+ customer groups in 90+ countries over the past 10 years. Know more
Osvaldo
Chile
How many node converged by OSN3500 EGS4 card?