![Icon [all products]](https://www.thunder-link.com/tl-content/uploads/2022/05/Icon-all-products-1.svg "Icon [all products]"){kind=icon}
All products
0 in stock 3-5 days lead time
SSN1EGSH
OptiX OSN 8800 16xGE Ethernet switching and processing board SSN1EGSH
19
People watching this product now!
Firmware Upgrades
Firmware Upgrades x
Firmware upgrades allow our customers to utilize the latest features and security enhancements that simply make the devices to operate proficiently Learn more
Hardware Compatibility
Hardware Compatibility x
Backed up by our experienced pre-sales support team, and volume documentation, to avoid purchasing incompatible hardware.
Hardware Tested
Hardware Tested x
In order to avoid hardware malfunction, each equipment will be strictly tested before delivery and the test report will be packed inside equipment and delivered together. Learn more
Software Compatibility
Software Compatibility x
Software compatibility test between active/standby system board, main control board and service board, mother/sub-card; system commissioning test to prevent all software conflicts.
Huawei WDM-OTN Equipment Test Procedure
In this topic, we take Huawei OSN 8800 as example to show you how to test the WDM/OTN equipment (Huawei OSN 6800 etc)Description
SSN1EGSH 16xGE Ethernet switching and processing board, apply to Huawei OptiX OSN 8800.
The board processes 16xGE services, which provides functions such as O/E conversion, Ethernet frame processing, mapping, Layer 2 (L2) switching, and overhead and pointer processing of the service signals.
The board is connected to the active and standby cross-connect boards through the backplane. In this manner, data is exchanged and services are groomed.
Supports the L2 convergence and point-to-multipoint (P2MP) convergence.
Supports the L2 forwarding function.
Supports switching on the client and SDH sides.
Supports the self-learning of the source MAC address. The capacity of the MAC address table is 32k. The aging time of the MAC address can be set and queried.
Supports the configuration of the static MAC route.
Supports the query of the dynamic MAC address.
Supports the creation, deletion, and query of the VB. Only one VB is supported. The maximum number of logical ports for one VB is 40.
Supports the data isolation based on VB+VLAN.
Queries the number of actually learned MAC addresses based on VB+VLAN or VB+LP.
The services that are based on the IEEE 802.1d MAC bridge are referred to as EPLAN services.
Supports the data isolation based on VB+VLAN.
Supports the EVPLAN services that are based on IEEE 802.1Q Virtual Bridge or IEEE 802.1ad Provider Bridge.
Supports the setting of the frame length to a value ranging from 1518 bytes to 9600 bytes.
Supports a jumbo frame with a maximum length of 9600 bytes.
ERPS cannot be used on the following bridges: IEEE 802.1d bridges and IEEE 802.1ad bridges in SVL/Ingress filter disable mode
When being installed in a T16 subrack, the board does not support SDH ASON.
SSN1EGSH is a 16-port GE Ethernet switching and processing board, applied to Huawei OptiX OSN 8800. SSN1EGSH part number is 03052875. The EGSH board accesses multiple types of Ethernet services and provides various functions and features such as the MPLS function, VLAN multicast function, QinQ function, and inter-board link aggregation function.
Tech Specs
| Front Panel | ||
| There are 16 interfaces on the front panel of the EGSH board, and “16 SFP” is silkscreened under the silkscreening for the indicator on the front panel.
|
||
| Valid Slot | ||
| OptiX OSN 8800 T64: subrack IU2 – IU7, IU12 – IU17, IU20 – IU25, IU28 – IU33, IU36 – IU41, IU46 – IU51, IU54 – IU59, IU62 – IU67
OptiX OSN 8800 T32 subrack: IU2 – IU7, IU12 – IU18, IU21 – IU26, IU29 – IU35 OptiX OSN 8800 T16 subrack: IU2 – IU7, IU12 – IU17 |
||
| Mechanical Specifications | ||
| Dimensions (mm) | 25.4(W) x 220 (D) x 266.7 (H) | |
| Weight (kg) | 1.2 | |
Additional information
| Weight | 3.0 kg |
|---|---|
| Dimensions | 30.0 × 18.0 × 8.5 cm |
| Features |
Firmware Upgrades, Hardware Compatibility, Hardware Tested, Software Compatibility |
Q&A
Q: Which SSN1EGSH ports can work as electrical interface on OSN 8800?
A: Only port 6 and port 8 of the SSN1EGSH board can work as the GE electrical interface.
Q: Can SSN1EGSH board be used in a master or slave subrack?
A: This board can be used only in an independent subrack, but not in a master or slave subrack.
Q: What is the Interface types of SSN1EGSH?
A:
· Supports the 1000 BASE-LX and 1000 BASE-SX optical interface.
· Port 6 and port 8 can work as the 1000 BASE-T electrical interface at the same time.
· All the sixteen interfaces comply with IEEE 802.3z.
Q: What is the Mappings Between the SSN1EGSH Board and Equipment?
A:
| Board | General 8800 T64 Subrack | Enhanced 8800 T64 Subrack | General 8800 T32 Subrack | Enhanced 8800 T32 Subrack | 8800 T16 Subrack | 8800 Universal Platform Subrack | 6800 Subrack | 3800 Subrack |
| N1EGSH | Y | Y | Y | Y | Y | N | N | N |
Relevant Items…
Reviews (1)
1 review for SSN1EGSH
Why Thunder-link.com
Malik
Germany
SSN1EGSH is equipped with SFP. Great to see test report paper is attached with card.