![Icon [all products]](https://www.thunder-link.com/tl-content/uploads/2022/05/Icon-all-products-1.svg "Icon [all products]"){kind=icon}
All products
in stock Ready to ship
SSN1SL64(Ls-64.2, LC)
Huawei OSN3500 7500 1-port STM-64 10G optical interface board SSN1SL6404 equipped with 1 Ls-64.2 80km SFP module
14
People watching this product now!
Firmware Upgrades
Firmware Upgrades x
Firmware upgrades allow our customers to utilize the latest features and security enhancements that simply make the devices to operate proficiently Learn more
Hardware Compatibility
Hardware Compatibility x
Backed up by our experienced pre-sales support team, and volume documentation, to avoid purchasing incompatible hardware.
Hardware Tested
Hardware Tested x
In order to avoid hardware malfunction, each equipment will be strictly tested before delivery and the test report will be packed inside equipment and delivered together. Learn more
Software Compatibility
Software Compatibility x
Software compatibility test between active/standby system board, main control board and service board, mother/sub-card; system commissioning test to prevent all software conflicts.
Huawei OSN 3500 System Test Procedure
In this document, we will show you how thunder-link.com tests SDH equipment product boards.Description
Apply to Huawei OSN 3500, OSN 7500 equipment to transmit and receive 1xSTM-64 optical signals, at 55~80km
Supports the board version replacement function.
Can substitute for the SSN2SL64(Ls-64.2,LC).
Supports the detection and query of the information about the optical module.
Supports the ALS function. The optical interface supports the setting of the on/off state of a laser..
Supports the VC-12 services, VC-3 services, and VC-4 services.
Supports the transparent transmission and termination of the path overheads.
Supports the setting and query of the J0, J1, J2, and C2 bytes.
Supports one channel of ECC communication.
Supports Two-fiber ring MSP. Four-fiber ring MSP. Linear MSP. SNCP. SNCMP. SNCTP protection schemes.
Supports inloops and outloops at optical interfaces.
Supports warm resets and cold resets.
Supports the query of the manufacturing information of the board.
Supports the in-service loading of the FPGA.
SSN1SL64 is a 1-port STM-64 optical interface board, can be used on Huawei O SN3500, OSN7500. SSN1SL64(Ls-64.2, LC) part number is 03030CCS, model name is SSN1SL6404.
SSN1SL64(Ls-64.2, LC) comes with 1 unit Ls-64.2 SFP module, transmission distance is 80km. SFP module is not swappable to perform different transmission distance.
Tech Specs
| Front Panel | ||
| The front panel of the SSN1SL64(Ls-64.2,LC) has indicators, interfaces, a bar code, and a laser safety class label.
|
||
| Valid Slot | ||
| OSN 3500: When the cross-connect boards are IXCSA and SXCSA, the SSN1SL64(Ls-64.2,LC) can be installed in slots 7,8,11,12.
OSN 7500: The SSN1SL64(Ls-64.2,LC) can be installed in any of slots 4–8, 11–16 and 26–31. |
||
| Feature Code | ||
| The number code that follows the board name in the bar code is the feature code of the board. The feature code of the SSN1SL64(Ls-64.2, LC) indicates the type of optical interface. | ||
| Board | Feature Code | Type of Optical Interface |
| SSN1SL6404 | 04 | Ls-64.2 |
| Optical Interface Parameter | ||
| Parameter | Value | |
| Nominal bit rate | 9953280 kbit/s | |
| Line code pattern | NRZ | |
| Application code | Le-64.2 | |
| Transmission distance (km) | 55 to 80 | |
| Type of fiber | Single-mode LC | |
| Operating wavelength range (nm) | 1530 to 1565 | |
| Launched optical power range (dBm) | 4 to 7 | |
| Receiver sensitivity (dBm) | -21 | |
| Minimum overload (dBm) | -8 | |
| Minimum extinction ratio (dB) | 8.2 | |
| Maximum -20 dB spectral width (nm) | 1 | |
| Minimum side mode suppression ratio (dB) | 30 | |
| Mechanical Specifications | ||
| Dimensions (mm) | 25.4 (W) x 235.2 (D) x 261.4 (H) | |
| Weight (kg) | 1.1 | |
Additional information
| Weight | 3.0 kg |
|---|---|
| Dimensions | 37.5 × 34.0 × 7.5 cm |
| Port |
1 |
| Features |
Firmware Upgrades, Hardware Compatibility, Hardware Tested, Software Compatibility |
| Rate |
STM-64 |
Q&A
Q: What the difference between different functional version?
A: SL64 is available in three functional versions, namely, N1, N2, and N4. The N2SL64 is discontinued. The difference as below:
| N1 | N2 | N4 | |
| Board version replacement function | Supported | Not supported | Supported |
| TCM function or AU-3 services. | Not supported | Supported | Not supported |
| Pluggable XFP optical modules | Not supported | Not supported | Supported |
| Detects and reports voltage performance | Not supported | Not supported | Supported |
| DWDM colored optical interfaces | Supported | Supported | Not supported |
| CWDM/DWDM colored optical interfaces | Not supported | Not supported | Supported |
| One-fiber bidirectional optical modules | Not supported | Not supported | Supported |
| Output of the standard wavelengths | Supported | Supported | Supported |
Q: What the board substitution relation among different versions?
A: When the TCM function and AU-3 services are not required, the N1SL64 can substitute for the N2SL64.
The N4SL64 supports the board version replacement function to substitute for the N1SL64/N2SL64.
Q: What is the difference between different function code?
A:
| Board | Feature Code | Optical Interface | Transmission Distance |
| SSN1SL6401 | 01 | I-64.2 | 25km |
| SSN1SL6402 | 02 | S-64.2b | 40km |
| SSN1SL6403 | 03 | Le-64.2 | 60km |
| SSN1SL6404 | 04 | Ls-64.2 | 80km |
| SSN1SL6405 | 05 | L-64.2b | 80km |
| SSN1SL6406 | 06 | V-64.2b | 120km |
Q: Can I change SFP module to reach longer transmission distance?
A: No, you can’t, STM-64 not support SFP module change.
Q: Can I use compatible SFP module on SSN1SL64(Ls-64.2, LC) board?
A: Yes, you can, the board might generate alarm, but it won’t affect use.
Q: Can I return/exchange board if not compatible with my system?
A: Yes, please tell our sales team your system and main control board version, before your purchase.
Q: The board is new or refurbished?
A: Yes, it is original new, not been used.
Q: Do you sell SFP module separately?
A: Yes, we do.
Q: What is the lead time for SSN1SL6404 board?
A: In normal condition is 5 days, better to confirm with our sales team before your purchase.
Reviews (0)
Why Thunder-link.com
Reviews
There are no reviews yet.