![Icon [all products]](https://www.thunder-link.com/tl-content/uploads/2022/05/Icon-all-products-1.svg "Icon [all products]"){kind=icon}
All products
29 in stock 3-5 days lead time
SSN1SLD64(S-64.2b,LC)
Huawei OSN3500 7500 2-port STM-64 10G optical interface board SSN1SLD6402 equipped with 2 S-64.2b 40km SFP module
20
People watching this product now!
Firmware Upgrades
Firmware Upgrades x
Firmware upgrades allow our customers to utilize the latest features and security enhancements that simply make the devices to operate proficiently Learn more
Hardware Compatibility
Hardware Compatibility x
Backed up by our experienced pre-sales support team, and volume documentation, to avoid purchasing incompatible hardware.
Hardware Tested
Hardware Tested x
In order to avoid hardware malfunction, each equipment will be strictly tested before delivery and the test report will be packed inside equipment and delivered together. Learn more
Software Compatibility
Software Compatibility x
Software compatibility test between active/standby system board, main control board and service board, mother/sub-card; system commissioning test to prevent all software conflicts.
Huawei OSN 3500 System Test Procedure
In this document, we will show you how thunder-link.com tests SDH equipment product boards.Description
Apply to Huawei OSN 3500, OSN 7500 equipment to transmit and receive 2xSTM-64 optical signals, at 2~40km.
Can be substituted by SSN4SLD64(S-64.2b,LC).
Supports CWDM and DWDM colored optical interfaces.
Supports single-fiber bidirectional optical modules, detects and reports voltage performance.
Supports the detection and query of the information about the optical module.
Supports the ALS function. The optical interface supports the setting of the on/off state of a laser..
Supports the usage and detection of the pluggable XFP optical module.
Supports the VC-12 services, VC-3 services, and VC-4 services.
Supports the transparent transmission and termination of the path overheads.
Supports the setting and query of the J0, J1, J2, and C2 bytes.
Supports one channel of ECC communication.
Supports Two-fiber ring MSP. Four-fiber ring MSP. Linear MSP. SNCP. SNCMP. SNCTP protection schemes.
Supports inloops and outloops at optical interfaces.
Supports the PRBS function in the line direction and Cause by Cross function, detects and reports voltage performance.
Supports the query of the manufacturing information of the board.
Supports the in-service loading of the FPGA.
SSN1SLD64 is a 2-ports STM-64 optical interface board, can be used on Huawei OSN3500, OSN7500. SSN1SLD64(S-64.2b,LC) part number is 03053081, model name is SSN1SLD6402.
SSN1SLD64(S-64.2b,LC) comes with 2 units S-64.2b SFP module, transmission distance is 40km. SFP module is not swappable to perform different transmission distance.
Tech Specs
| Front Panel | ||
| The front panel of the SSN1SLD64(S-64.2b,LC) has indicators, interfaces, a bar code, and a laser safety class label.
|
||
| Valid Slot | ||
| OSN 3500: the SSN1SLD64(S-64.2b,LC) can be installed in slots 7, 8, 11, and 12.
OSN 7500: When cross-connect board are T1GXCSA and T1EXCSA, SSN1SLD64(S-64.2b,LC) can not be installed in any of slots; When cross-connect board are T1UXCSA, T1SXCSA, T1IXCSA and T1PSXCSA, SSN1SLD64(S-64.2b,LC) can be installed in any of slots 7–8, 11–12 and 30–31. |
||
| Feature Code | ||
| The number code that follows the board name in the bar code is the feature code of the board. The feature code of the SSN1SLD64(S-64.2b, LC) indicates the type of optical interface. | ||
| Board | Feature Code | Type of Optical Interface |
| SSN1SLD6402 | 02 | S-64.2b |
| Optical Interface Parameter | ||
| Parameter | Value | |
| Nominal bit rate | 9953280 kbit/s | |
| Line code pattern | NRZ | |
| Application code | S-64.2b | |
| Transmission distance (km) | 2 to 40 | |
| Type of fiber | Single-mode LC | |
| Operating wavelength range (nm) | 1530 to 1565 | |
| Launched optical power range (dBm) |
-1 to +2 | |
| Receiver sensitivity (dBm) | -14 | |
| Minimum overload (dBm) | -1 | |
| Minimum extinction ratio (dB) | 8.2 | |
| Maximum -20 dB spectral width (nm) | 1 | |
| Minimum side mode suppression ratio (dB) | 30 | |
| Mechanical Specifications | ||
| Dimensions (mm) | 25.4 (W) x 235.2 (D) x 261.4 (H) | |
| Weight (kg) | 1.2 | |
Additional information
| Weight | 3.0 kg |
|---|---|
| Dimensions | 37.5 × 34.0 × 7.5 cm |
| Port |
2 |
| Features |
Firmware Upgrades, Hardware Compatibility, Hardware Tested, Software Compatibility |
| Rate |
STM-64 |
Q&A
Q: What the difference between different functional version?
A: SLD64 is available in three functional versions, namely, N1 and N4. The difference as below:
| N4 | N1 | ||
| Standard P1L1-2D2 optical ports | Not supported | Supported | |
| Output of the wavelengths that comply with ITU-T G.692 | Not supported | Supported | |
| 1.5 Mbit/s DCN | Not supported | Supported | |
| Detects and reports voltage performance | Not supported | Supported | |
| DWDM colored optical interfaces | Not Supported | Supported | |
| CWDM and DWDM colored optical interfaces | Not supported | Supported | |
| Single-fiber bidirectional optical modules | Not supported | Supported | |
| PRBS function | Not Supported | Supported | |
Q: What the board substitution relation among different versions?
A: The N4SLD64 supports the board version replacement function to substitute for the N1SLD64.
Q: What is the difference between different function code?
A:
| Board | Feature Code | Optical Interface | Transmission Distance |
| SSN1SLD6401 | 01 | I-64.1 | 2km |
| SSN1SLD6402 | 02 | S-64.2b | 40km |
Q: Can I change SFP module to reach longer transmission distance?
A: No, you can’t, STM-64 not support SFP module change.
Q: Can I equip different specification SFP module on different port, to perform different transmission distance for each port?
A: Yes, you can, but that not recommended.
Q: Can I use compatible SFP module on SSN1SLD64(S-64.2b,LC) board?
A: Yes, you can, the board might generate alarm, but it won’t affect use.
Q: Can I return/exchange board if not compatible with my system?
A: Yes, please tell our sales team your system and main control board version, before your purchase.
Q: The board is new or refurbished?
A: Yes, it is original new, not been used.
Q: Do you sell SFP module separately?
A: Yes, we do.
Q: What is the lead time for SSN1SLD6402 board?
A: In normal condition is 5 days, better to confirm with our sales team before your purchase.
Reviews (2)
2 reviews for SSN1SLD64(S-64.2b,LC)
Why Thunder-link.com
Bakoc
Serbia
The upgrading of the system should be simplified and made faster.
Espinoza
Serbia
I don’t know why there was some dirty on the package. Luckily, the board was ok.