63xE1(75ohm) Service Processing Board
Working with 2*D75S to transmit/receive and process 63xE1 signals
Supports E13 function, which is used to converge E1 services into E3 services.
Supports the CRC function.
Can replace the SSN1PQ1A.
Processes E1 signals, processes overhead bytes, reports alarms and performance events.
Provides maintenance features, and supports the TPS protection.
Supports the processing of the path overheads at the VC-12 level, such as the J2 byte.
Supports inloops and outloops at electrical interfaces.
Supports warm resets and cold resets. The warm reset does not affect services.
Supports the query of the manufacturing information of the board.
Supports the in-service loading of the FPGA.
Supports the upgrade of the board software without affecting services.
Supports the PRBS test in the tributary direction and in the cross-connect direction in the normal mode.
Not support the PRBS test in the MUX mode or Server mode.
Supports the TPS protection when working with the interface board.
SSN2PQ1A is a 63xE1 processing service processing board, can be used on Huawei OSN 1500B, OSN 2500, OSN 3500, OSN 7500. SSN2PQ1A part number is 03030KQL, model name is SSN2PQ1A01. SSN2PQ1A does’t have interface on board front panel, it must work with 2 pieces of D75S 75ohm E1 interface board.






Jesper
Czech Republic
If PQ1 card by OSN support retime function?
Adrian Gomez
Argentina
For a very small order, they went above and beyond to help me! Their customer service is the BEST.
Jack Shirley
Kenya
Quick reliable service, good pricing
hellen
Germany
Everything is ok, the only lack is that there is a scratch on the board.