![Icon [all products]](https://www.thunder-link.com/tl-content/uploads/2022/05/Icon-all-products-1.svg "Icon [all products]"){kind=icon}
All products
in stock 3-5 days lead time
SSN2SLQ16(L-16.1,LC)
Huawei OSN3500 7500 4-port STM-16 2.5G optical interface board SSN2SLQ1603 equipped with 4 L-16.1 40km SFP module
18
People watching this product now!
Firmware Upgrades
Firmware Upgrades x
Firmware upgrades allow our customers to utilize the latest features and security enhancements that simply make the devices to operate proficiently Learn more
Hardware Compatibility
Hardware Compatibility x
Backed up by our experienced pre-sales support team, and volume documentation, to avoid purchasing incompatible hardware.
Hardware Tested
Hardware Tested x
In order to avoid hardware malfunction, each equipment will be strictly tested before delivery and the test report will be packed inside equipment and delivered together. Learn more
Software Compatibility
Software Compatibility x
Software compatibility test between active/standby system board, main control board and service board, mother/sub-card; system commissioning test to prevent all software conflicts.
Huawei OSN 3500 System Test Procedure
In this document, we will show you how thunder-link.com tests SDH equipment product boards.Description
Apply to the Huawei OptiX OSN 3500, OSN 7500 to transmit and receive 4xSTM-16 optical signals, transit 15~40km.
Supports the AU-3 services.
Supports the TCM function
Can be substituted by the N1SLQ16(L-16.1,LC),when the AU-3 services and TCM function are not required
Supports the detection and query of the information about the optical module.
Supports the ALS function. The optical interface supports the setting of the on/off state of a laser.
Supports the usage and detection of the SFP optical module.
Supports the VC-12, VC-3, VC-4 and VC-4-4c, VC-4-8c and VC-4-16c concatenation services.
Supports the AU-3 services.
Supports the configuration of the D1-D12, E1, and E2 bytes as transparent transmission bytes.
Supports the transparent transmission and termination of the path overheads.
Supports the setting and query of the J0, J1, J2, and C2 bytes.
Supports one to four channels of ECC communication.
Supports the Two-fiber ring MSP, Four-fiber ring MSP, Linear MSP, SNCP, SNCMP, SNCTP.
Supports the fiber-shared virtual trail protection.
Supports the fiber-shared MSP and processes eight sets of K bytes.
Supports inloops and outloops at optical interfaces.
Supports warm resets and cold resets. The warm reset does not affect services.
Supports the query of the manufacturing information of the board.
Supports the in-service loading of the FPGA.
Supports the upgrade of the board software without affecting services.
Supports the press-to-collect function in fault data collection.
Supports the TCM function.
SSN2SLQ16 is a 4-ports STM-16 optical interface board, can be used on Huawei OSN3500, OSN7500. SSN2SLQ16(L-16.1,LC) part number is 03030DFS, model name is SSN2SLQ1603.SSN2SLQ16(L-16.1,LC) comes with 4 unit L-16.1 SFP module, transmission distance is 40km. SFP module is swappable to perform different transmission distance.
Tech Specs
| Front Panel | ||
| The number code that follows the board name in the bar code is the feature code of the board. The feature code of the SSN2SLQ16(L-16.1,LC)indicates the type of optical interface.
|
||
| Valid slot | ||
| OSN 3500: SSN2SLQ16(L-16.1,LC)can be installed in slots 1–4, 15, and 16. In this case,2 optical interfaces can be configured; SSN2SLQ16(L-16.1,LC) can be installed in slots 5–8 and 11–14. In this case, 4 optical interfaces can be configured. OSN 7500: SSN2SLQ16(L-16.1,LC) can be installed in slots 1–8, 11–18, and 26–31. In this case, 4 optical interfaces can be configured. |
||
| Feature Code | ||
| The feature code of the SSN2SLQ16(L-16.1,LC) indicates the type of optical interface. | ||
| Board | Feature Code | Type of Optical Interface |
| SSN2SLQ1604 | 04 | L-16.1 |
| Optical interface parameters | ||
| Parameter | Value | |
| Nominal bit rate | 2488320 kbit/s | |
| Line code pattern | NRZ | |
| Application code | L-16.1 | |
| Transmission distance (km) | 15 to 40 | |
| Type of fiber | Single-mode LC | |
| Operating wavelength range (nm) | 1280 to 1335 | |
| Launched optical power range (dBm) |
-2 to +3 | |
| Receiver sensitivity (dBm) | -27 | |
| Minimum overload (dBm) | -9 | |
| Maximum -20 dB spectral width (nm) | 1 | |
| Minimum extinction ratio (dB) | 8.2 | |
| Minimum side mode suppression ratio (dB) | 30 | |
| Mechanical Specifications | ||
| Dimensions (mm) | 25.4 (W) x 235.2 (D) x 261.4 (H) | |
| Weight (kg) | 0.9 | |
Additional information
| Weight | 3.0 kg |
|---|---|
| Dimensions | 37.5 × 34.0 × 7.5 cm |
| Port |
4 |
| Features |
Firmware Upgrades, Hardware Compatibility, Hardware Tested, Software Compatibility |
| Rate |
STM-16 |
Q&A
Q: What the difference between different functional version?
A: SLQ16 is available in three functional versions, namely, N1, N2, and N4, N4 version also called ND0 version. The N2SLQ16 is discontinued. The difference as below:
| N1 | N2 | N4/ND0 | |
| Color Interface(CWDM, DWDM) | Not supported | Not supported | Supported |
| single-fiber bidirectional optical modules | Not supported | Not supported | Supported |
| AU-3 service | Not supported | Supported | Not supported |
| inloops and outloops on VC-4 paths | Supported | Not supported | Supported |
| TCM function | Not supported | Supported | Not supported |
| Detection and query of the voltage | Not supported | Not supported | Supported |
Q: What the board substitution relation among different versions?
A:When the AU-3 services and TCM function are not required, the N1SLQ16 and N2SLQ16 can be substituted with each other.The N4SLQ16 supports the board version replacement function to substitute for the N1SLQ16/N2SLQ16.
Q: What is the difference between different function code?
A:
| Board | Feature Code | Optical Interface | Transmission Distance |
| SSN1SLQ1601,SSN2SLQ1601 | 01 | I-16 | 2km |
| SSN1SLQ1602,SSN2SLQ1602 | 02 | S-16.1 | 15km |
| SSN1SLQ1603,SSN2SLQ1603 | 03 | L-16.1 | 40km |
| SSN1SLQ1604, SSN2SLQ1604 | 04 | L-16.2 | 80km |
| SSN1SLQ16A10 | 10 | I-16 | 2km |
| SSN1SLQ16A11 | 11 | S-16.1 | 15km |
| SSN1SLQ16A12 | 12 | L-16.1 | 40km |
| SSN1SLQ16A13 | 13 | L-16.2 | 80km |
Q: Can I change SFP module to reach longer transmission distance?
A: Yes, you can, please contact thunder-link.com sales team, for available SFP module and cost.
Q: Can I equip different specification SFP module on different port, to perform different transmission distance for each port?
A: Yes, you can, but that not recommended.
Q: Can I use compatible SFP module on SSN2SLQ16(L-16.1,LC) board?
A: Yes, you can, the board might generate alarm, but it won’t affect use.
Q: Can I return/exchange board if not compatible with my system?
A: Yes, please tell our sales team your system and main control board version, before your purchase.
Q: The board is new or refurbished?
A: Yes, it is original new, not been used.
Q: Do you sell SFP module separately?
A: Yes, we do.
Q: What is the lead time for SSN2SLQ16(L-16.1,LC) board?
A: In normal condition is 5 days, better to confirm with our sales team before your purchase.
Reviews (0)
Why Thunder-link.com
Reviews
There are no reviews yet.