![Icon [all products]](https://www.thunder-link.com/tl-content/uploads/2022/05/Icon-all-products-1.svg "Icon [all products]"){kind=icon}
All products
5 in stock Ready to ship
SSN3EAS201
Huawei OSN3500 7500 8800 2-ports 10G Ethernet Processing Board SSN3EAS201
16
People watching this product now!
Firmware Upgrades
Firmware Upgrades x
Firmware upgrades allow our customers to utilize the latest features and security enhancements that simply make the devices to operate proficiently Learn more
Hardware Compatibility
Hardware Compatibility x
Backed up by our experienced pre-sales support team, and volume documentation, to avoid purchasing incompatible hardware.
Hardware Tested
Hardware Tested x
In order to avoid hardware malfunction, each equipment will be strictly tested before delivery and the test report will be packed inside equipment and delivered together. Learn more
Software Compatibility
Software Compatibility x
Software compatibility test between active/standby system board, main control board and service board, mother/sub-card; system commissioning test to prevent all software conflicts.
Description
SSN3EAS201 2-port 10GE switching and processing board, apply to Huawei OSN3500, OSN7500, OSN8800
Supports 10GBASE-LR and 10GBASE-LW Ethernet optical ports, which comply with IEEE 802.3ae.
Supports Non-autonegotiation mode.
Supports Query/Setting of port status and Query of port types.
Not supports Setting of optical power thresholds.
Supports SFP+ optical modules and one-fiber bidirectional optical modules.
Supports PORT-based transparent transmission.
Supports PORT-shared EVPL services.
Supports VCTRUNK-shared EVPL services.
Supports a maximum of 4096 links in the case of the N3EAS2.
Supports a maximum of one VB on N3EAS2 boards.
Supports blacklist that can contain 512 records.
Supports static media access control (MAC) address table that can contain 512 records.
Supports the self-learning of the source MAC address.
Supports the configuration of static MAC routes.
Supports the query of the aging time of an MAC address.
Supports the query of learned MAC addresses by VB+VLAN or VB+LP.
Supports EPLAN services that are based on IEEE 802.1d MAC bridges.
Supports EVPLAN services that use stack VLAN encapsulation.
Supports data isolation based on VB+VLAN.
Supports EVPLAN services based on IEEE 802.1q virtual bridges and IEEE 802.1ad provider bridges.
Supports IEEE 802.3,Ethernet II, IEEE 802.1 q/p.
Supports the setting of the frame length to a value ranging from 1518 bytes to 9600 bytes.
Supports a jumbo frame with a maximum length of 9600 bytes.
Supports bound bandwidth 128xVC-4
Supports VC-4-Xv (X≤64) and VC-4-4c/16c/64c concatenation granularities.
Supports Tunnel-based EVPL (transit).
Supports a total number of 4094 VLANs, which comply with IEEE 802.1q/p.
Supports a maximum of 20 Gbit/s upstream bandwidth and can adapt to the bandwidth of its slot.
Supports a maximum of 17 (VCTRUNK1 to VCTRUNK17) if the slot bandwidth is 10 Gbit/s.
Supports a maximum of 34 (VCTRUNK1 to VCTRUNK34) if the slot bandwidth is 20 Gbit/s
Not supports TPS,BPS,PPS; supports DLAG, LAG, LCAS, LPT, STP/RSTP, MSTP, ERPS.
Supports the port-based traffic control function that complies with IEEE 802.3x.
SSN3EAS201 is a 2-port 10GE switching and processing board, that can be used on Huawei OSN3500, OSN7500 and OSN8800. SSN3EAS201 comes with 2 units of 10GBASE-LR (LAN) SFP+ module, transmission distance is 10km. SFP+ module is swappable to perform different transmission distances.
Tech Specs
| Front Panel | ||
|
|
||
| Valid Slot | ||
| OSN 3500/OSN 7500: N3EAS2 board can also be installed in any of slots 5-8 and 11-14 in a subrack
When an N3EAS2 board is installed in slot 5, 6, 13, or 14, it provides a bandwidth of 10 Gbit/s; when an N3EAS2 board is installed in slot 7, 8, 11, or 12, it provides a bandwidth of 20 Gbit/s.
OptiX OSN 8800 T64 subrack: IU1–IU8, IU11–IU42, and IU45–IU68 OptiX OSN 8800 T32 subrack: IU1–IU8, IU12–IU27, and IU29–IU36 OptiX OSN 8800 T16 subrack: IU1 to IU8, and IU11 to IU18 |
||
| Optical Interface Parameter | ||
| Transmission rate | 10.3125 Gbit/s or 9.953 Gbit/s | |
| Processing capability | 2x10GE signals | |
| Type of optical interface | 10GBASE-LR/LW | |
| Type of fiber | Single-mode LC | |
| Transmission distance (km) | 10 | |
| Operating wavelength range (nm) | 1290 to 1330 | |
| Maximum mean launched power (dBm) | 0.5 | |
| Minimum mean launched power (dBm) | -8.2 | |
| Receiver sensitivity (dBm) | -12.6 | |
| Minimum extinction ratio (dB) | 3.5 | |
| Connector type | LC | |
| Maximum -20 dB spectral width (nm) | 1 | |
| Minimum side mode suppression ratio (dB) | 30 | |
| Mechanical Specifications | ||
| Dimensions (mm) | 25.4 (W) x 235.2 (D) x 261.4 (H) | |
| Weight (kg) | 1.1 | |
Additional information
| Weight | 3.0 kg |
|---|---|
| Dimensions | 37.5 × 34.0 × 7.5 cm |
| Port |
2 |
| Features |
Firmware Upgrades, Hardware Compatibility, Hardware Tested, Software Compatibility |
| Rate |
10G |
Q&A
Q: What’s the difference between different functional versions?
A: The EAS2 is available in the following functional versions: N1 and N3. Differences are as below:
| N1 | N3 | |
| ERPS function | Not supported | Supported |
| One-fiber bidirectional optical modules | Not supported | Supported |
| Pluggable optical module | XFP optical module | SFP+ optical module |
| Ethernet virtual private line (EVPL) service | Supports a maximum of 2048 link | Supports a maximum of 4096 |
| Bound bandwidth | 64xVC-4 or 192xVC-3 | 128xVC-4 |
| MPLS technology | Not supported | Supported |
| Maximum uplink bandwidth | Supports a maximum of 10 Gbit/s | Supports a maximum of 20 Gbit/s |
| MSTP | Not supported | Supported |
| ERPS | Not supported | Supported |
Q: What is the feature code of EAS2?
A: EAS2 has no feature code.
Q: Can I change SFP+ module to reach a longer transmission distance?
A: Yes, you can, please contact the thunder-link.com sales team, for the available SFP+ module and cost.
Q: Can I equip different specification SFP+ modules on different ports, to perform different transmission distances for each port?
A: Yes, you can, but that is not recommended.
Q: Can I use a compatible SFP+ module on the SSN3EAS201 board?
A: Yes, you can, the board might generate an alarm, but it won’t affect use.
Q: Can I return/exchange the board if not compatible with my system?
A: Yes, please tell our sales team your system and main control board version, before your purchase.
Q: The board is new or refurbished?
A: Yes, it is original new, not been used.
Q: Do you sell SFP+ modules separately?
A: Yes, we do. You can contact the thunder-link.com sales team, for the available SFP+ module and cost.
Q: What is the lead time for the SSN3EAS201 board?
A: In normal conditions is 5 days, better to confirm with our sales team before your purchase.
Relevant Items…
Matching Products…
Reviews (0)
Why Thunder-link.com
Reviews
There are no reviews yet.