![Icon [all products]](https://www.thunder-link.com/tl-content/uploads/2022/05/Icon-all-products-1.svg "Icon [all products]"){kind=icon}
All products
15 in stock 3-5 days lead time
SSN3SLH41
Huawei OSN 7500 16xSTM-1/STM-4 optical interface board, SSN3SLH41
20
People watching this product now!
Firmware Upgrades
Firmware Upgrades x
Firmware upgrades allow our customers to utilize the latest features and security enhancements that simply make the devices to operate proficiently Learn more
Hardware Compatibility
Hardware Compatibility x
Backed up by our experienced pre-sales support team, and volume documentation, to avoid purchasing incompatible hardware.
Hardware Tested
Hardware Tested x
In order to avoid hardware malfunction, each equipment will be strictly tested before delivery and the test report will be packed inside equipment and delivered together. Learn more
Software Compatibility
Software Compatibility x
Software compatibility test between active/standby system board, main control board and service board, mother/sub-card; system commissioning test to prevent all software conflicts.
Huawei OSN 3500 System Test Procedure
In this document, we will show you how thunder-link.com tests SDH equipment product boards.Description
SSN3SLH41 16xSTM-1/STM-4 optical interface board, apply to Huawei OSN 7500
The SLH41 is a line board, which can be used on the OptiX OSN equipment series to transmit and receive STM-1/STM-4 optical signals.
The functional version of the SLH41 is N3.
The SLH41 converts the received optical signals into electrical signals and sends the electrical signals to the cross-connect side. In addition, the SLH41 converts the electrical signals sent from the cross-connect side into optical signals and transmits the optical signals.
The STM-1/STM-4 optical module can be used, which supports the adaptive modulation (AM) technology.
When the STM-1 optical module is used, the standard S-1.1, L-1.1, and L-1.2 optical interfaces are supported. The optical interfaces of the S-1.1, L-1.1, and L-1.2 types comply with ITU-T G.957.
When the STM-4 optical module is used, the standard S-4.1 and L-4.2 optical interface is supported. The optical interface of the S-4.1 and L-4.2 type complies with ITU-T G.957.
Supports the CWDM and DWDM colored optical interfaces. The optical interface uses the LC connector. The CWDM optical interface supports the transmission distance of 80 km, and the DWDM optical interface supports the transmission distance of 120 km.
SSN3SLH41 is a 16xSTM-1/STM-4 optical interface board, can be used on Huawei OSN 7500. SSN3SLH41 part number is 03052886. SSN3SLH41 is used to transmit and receive 16xSTM-1/STM-14 optical signals, to perform O/E conversion for the STM-1/STM-4 optical signals, to extract or insert overhead bytes, and to report alarms generated on the line.
Tech Specs
| Front Panel | ||
| The front panel of the SLH41 has indicators, interfaces, a bar code, and a laser safety class label.
|
||
| Valid Slot | ||
| The SLH41 can be installed in slots 1-8 and slots 11-18 in the subrack. | ||
| Mechanical Specifications | ||
| Dimensions (mm) | 25.4 (W) x 235.2 (D) x 261.4 (H) | |
| Weight (kg) | 1.5 | |
Additional information
| Weight | 3.0 kg |
|---|---|
| Dimensions | 24.0 × 26.0 × 3.0 cm |
| Features |
Firmware Upgrades, Hardware Compatibility, Hardware Tested, Software Compatibility |
| Rate |
STM-1, STM-4 |
Q&A
Q: Does SSN3SLH41 have Jumpers and DIP Switches?
A: No, the SLH41 does not have any jumpers or DIP switches that are used for board settings.
Q: What are the SSN3SLH41 valid slots?
A: The SLH41 must be installed in a valid slot on the subrack. Otherwise, the SLH41 fails to work normally. The SSN3SLH41 can be installed in slots 1-8 and slots 11-18 in the subrack.
Q: What are the functions of SSN3SLH41?
A: The SLH41 is used to transmit and receive 16xSTM-1/STM-14 optical signals, to perform O/E conversion for the STM-1/STM-4 optical signals, to extract or insert overhead bytes, and to report alarms generated on the line.
Q: What is the Relationship between the feature code of the SLH41 and the type of optical interface?
A:
| Board | Feature Code | Type of Optical Interface |
| SSN3SLH4101 | 1 | 12xS-1.1, 4xS-4.1 |
| SSN3SLH4102 | 2 | 8xS-1.1, 8xS-4.1 |
| SSN3SLH4103 | 3 | 16xS-1.1 |
| SSN3SLH4104 | 4 | 4xL-1.1, 12xS-4.1 |
| SSN3SLH4105 | 5 | 16×S-4.1 |
| SSN3SLH4106 | 6 | 16xL-1.2 |
| SSN3SLH4107 | 7 | 16×L-4.2 |
| The G.657A2 fiber jumper is required because the singlemode optical module is used over the interface. | ||
Reviews (1)
1 review for SSN3SLH41
Why Thunder-link.com
Matt
Austria
Good packing with the test report paper attached. SSN3SLH41 with full SFP equipped as picture.