8xFE processing board with LAN switch SSND00EFS011
3-Level Quality Control x
We provide 3-Level Quality Control procedure: 1-Level inspection; 2-Level In-stock test; 3-Level 24 hour pre-delivery and 1 year warranty. Learn More
8-Year Gold Supplier x
Thunder-link.com, founded in 2011, a leading professional Huawei network hardware and solution provider, service over 100 VIP customers from 50 countries in 8 year. Learn More
SSND00EFS011 8-ports 10/100M Fast Ethernet Processing Board with LAN Switch, apply to Huawei OSN1500B, OSN2500, OSN3500, OSN7500.
Working together with SSN1ETF8 to provide 8xRJ45 interface.
Maximum uplink bandwidth is 1.25 Gbit/s.
Supports the board version replacement function and can replace the SSN2EFS0/SSN1EFS0.
Processes 8xFE services and supports convergence of 60x10 Mbit/s or 6x100 Mbit/s services.
Supports flow classification based on PORT, PORT+VLAN ID, and PORT+VLAN ID+VLAN PRI.
Support 24 VCTRUNKs
Supports 10BASE-T/100BASE-TX signals when it is used with the ETF8A.
Supports 100BASE-FX signals when it works with EFF8A. The optical interfaces comply with IEEE802.3u.
Supports the PORT-based transparent transmission EPL services.
Supports PORT+VLAN-based EVPL services that use frame encapsulation formats of MartinioE and stack VLAN.
Supports the point-to-multipoint (P2MP) converging service that is based on Layer 2.
Supports the Layer 2 forwarding function.
Supports switching on the client and SDH sides.
Supports the blacklist that can contain 2K records and static MAC address table that can contain 2K records.
Supports the self-learning of the source MAC address.
The capacity of the MAC address table is 16K
Supports the configuration of the static MAC route.
Supports the query of the dynamic MAC address.
Supports the creation, deletion, and query of the VB.
Mximum number of supported VBs is 16. Maximum number of logical ports for each VB is 30.
Supports the EPLAN services that are based on the IEEE 802.1d MAC bridge.
Supports EVPLAN virtual bridges.
Supports data isolation based on VB+VLAN.
Supports the setting of a maximum of 4096 VLAN services.
Supports the EVPLAN services that are based on the IEEE 802.1q virtual bridge.
Supports Ethernet II, IEEE 802.3, and IEEE 802.1 q/p formats.
Supports the frame with a length ranging from 64 bytes to 9600 bytes.
Supports the Jumbo frame with a length less than 9600 bytes.
Supports the setting of the packet length, which ranges from 1518 bytes to 9600 bytes.
Support 24xVC-3, or 126xVC-12 +18xVC-3 bound bandwidth.
Supports the GFP-F encapsulation.
Supports the MPLS.
Supports 4k VLANs. The VLAN technology complies with IEEE 802.1q/p.
Supports TPS, not supports BPS, PPS, DLAG.
Support manual link aggregation and load sharing mode that comply with IEEE 802.3ad and IEEE 802.1AX
Supports dynamically increases/decreases bandwidth, protects bandwidth comply with ITU-T G.7042 protection schemes.
Support P2P LPT and P2MP LPT. LPT functions comply with ITU-T G.7042.
Supports broadcast packet suppression function and RSTP, which comply with IEEE 802.1w.
Not supports Synchronous Ethernet, IEEE 1588v2.
Support CC, LB, LT tests comply with IEEE 802.1ag, and OAM ping comply with Huawei proprietary protocol.
Support OAM auto-discovery, remote loopbacks and fault detection comply with IEEE 802.3ah.
Support link performance detection comply with IEEE 802.3ah.
Supports selfloop detection in compliance with Huawei proprietary protocol.
Support test frames in Ethernet/GFP bearer mode.
Supports Ethernet performance monitoring at the port level.
Supports the CAR. The granularity is 64 kbit/s.
Support flow classification based on PORT, PORT++VLAN ID, or PORT+VLAN ID+VLAN PRI.
Supports Protocol enabling, Port aging time;
Not supports Fast leave, Static broadcast entry. Discarding of unknown broadcast packets,
Supports the port-based traffic control function that complies with IEEE 802.3x.
SSND00EFS011 is a 8-ports FE service processing board, can be used on Huawei OSN1500B, OSN2500, OSN3500, OSN7500. SSND00EFS011 part number is 03020KHP, model name is SSN5EFS0. SSND00EFS011 don’t have interface on board, it must work with SSN1ETF8 to provide 8 FE electrical interface, or with SSN1EFF8 to provide 8 FE optical interface.
|Front Panel of SSND00EFS011|
The front panel of the SSND00EFS011 has indicators and a bar code.
|Front Panel of SSN1ETF8|
The front panel of the SSN1ETF8 has indicators, interfaces, a bar code, and a laser safety class label.
OSN 1500B: SSND00EFS011 can be installed in slots 11–13.
OSN 2500: When the cross-connect board is CXLLN, SSND00EFS011 can be installed in slots 6, 7, 12 and 13. OSN 3500: SSND00EFS011 can be installed in slots 2–5 and 13–16.
OSN 7500: SSND00EFS011 can be installed in slots 2, 3, 17, and 18.
|Optical Interface Parameter of SSN1EFF8|
|Nominal bit rate||100 Mbit/s|
|Line code pattern||NRZI encoding signal (100M)|
|Type of optical interface||1000BASE-LX|
|Type of fiber||Single-mode LC(15km)|
|Operating wavelength range (nm)||1261 to 1360|
|Launched optical power range (dBm)||-15 to -8|
|Receiver sensitivity (dBm)||-28|
|Minimum overload (dBm)||-8|
|Minimum extinction ratio (dB)||9|
|Dimensions (mm)||25.4 (W) x 235.2 (D) x 261.4 (H)||22.0 (W) x 125.2 (D) x 261.4 (H)|
Q: What’s the difference between different functional versions?
A: EFS0 is available in the following functional versions: N1, N2, N4, and N5, N5 version also called ND00 version. N2EFS0/N4EFS0/N1EFS0 is discontinued. Differences are as below:
|Interface types 10BASE-T/100BASE-TX||Not supported||Not supported||Not supported||Supported when works with an ETF8A|
|Interface types 100BASE-FX/LX||Not supported||Not supported||Not supported||Supported when works with an EFF8A|
|Bound bandwidth||12xVC-3, or 63xVC-12 + 9xVC-3||24xVC-3, or 126xVC-12 + 18xVC-3||24xVC-3, or 126xVC-12 + 18xVC-3||24xVC-3, or 126xVC-12 + 18xVC-3|
|LPT||Supports P2P LPT||Supports P2P LPT||Supports P2P LPT and P2MP LPT||Supports P2P LPT and P2MP LPT|
|ETH OAM||Not supported||Not supported||Supported||Supported|
|Test frames||Supports test frames in Ethernet bearer mode||Supports test frames in Ethernet bearer mode||Supports test frames in Ethernet/GFP bearer mode||Supports test frames in Ethernet/GFP bearer mode|
|Port mirroring||Not supported||Not supported||Not supported||Supported|
|Traffic monitoring||Not supported||Not supported||Not supported||Supported|
Q: What is the board substitution relation among different versions?
A: The N5EFS0 supports the board version replacement function and can replace the N4EFS0/N2EFS0/N1EFS0.
Q: Can I return/exchange board if not compatible with my system?
A: Yes, please tell our sales team your system and main control board version, before your purchase.
Q: The board is new or refurbished?
A: Yes, it is original new, not been used.
Q: What is the lead time for SSND00EFS011-ETF8 board?
A: In normal condition is 5 days, better to confirm with our sales team before your purchase.