My Cart

Mini Cart

How to link a Huawei ONT to Huawei OLT?
Technical Support
This help center can answer your questions about customer services, products tech support,network issues.
How to link a Huawei ONT to Huawei OLT?

How to link a Huawei ONT to Huawei OLT?

Some of our customers are unfamiliar for Huawei OLT and ONT, they choose Huawei network products when just set up their internet service company, so everything maybe new for them. The first skill which need to be acquired is linking ONT to OLT. Below are briefly guide and steps that operated in our test lab, hope it is helpful.

 

Preparations:

 

1, OLT and ONT (we use MA5800 X17 and HS8546V5 in our lab)

2, GPON board GPHF

3, Ethernet cable connects ONT and PC; console cable connects OLT and PC

4, Patch-cord, attenuator (keep ONT RX is -20dbm~-24dbm)

 

Procedures:

 

1, login OLT and confirm GPON board
MA5800-X17(config)#display board 0

MA5800-X17(config)#board confirm 0/X

2, Enable autofind function of the GPON port
MA5800-X17(config-if-gpon-0/2)#port 0 ont-auto-find enable

3, Search for the SN of ONT
MA5800-X17(config-if-gpon-0/2)#display ont autofind 0 

{ <cr>||<K> }:

  Command:

          display ont autofind 0

   ----------------------------------------------------------------------------

   Number              : 1

   F/S/P               : 0/2/0

   Ont SN              : 4857XXXXXXXXX (HWTC-E4C09C9D)

   Password            : 0x00000000000000000000

   Loid                :

   Checkcode           :

   VendorID            : HWTC

   Ont Version         : 14ED.A

   Ont SoftwareVersion : V5R019C00S050

   Ont EquipmentID     : HS8546V5

   Ont Customized Info : COMMON

   Ont autofind time   : 2000-01-01 10:11:24+08:00

   ----------------------------------------------------------------------------

4, Linking ONT to OLT

Make sure ONT PON port are light (the light blinks before auth)

 

5, Finish Auth

VLAN Plan and main code:

vlan 500 smart

interface vlanif 500

ip address 10.10.10.2 24

port vlan 500 0/9 0

traffic table ip index 8 cir 4096 priority 1 priority-policy local-setting

ont add 0 15 sn-auth 48575443EXXX omci

traffic table ip index 8 cir 4096 priority 1 priority-policy  local-setting

servike-port 10 vlan 500 port 0/2/0 ont 15 eth 1 multi-service user-vlan untagged tag-transform default inbound traffic-table index 8 outbound traffic-table index 8

 

Topological graph for reference

 

 

6, Configuring Up-link Suit (Switch or Router)

Tips : trunk mode & permit vlan pass must be set when link OLT port

This is just a very simple guidance, if your engineer still has problems after operating as this way, please contact thunder-link.com supports teams, and we will assist you via email or provide remote assistance if necessary.