Many ISP customers want to use U2000 NMS to manage Huawei MA5600T, MA5800 series OLT. But U2000 is more complex than command line, some customers do not know how to do configurations and modify data on MA5600T MA5800 via U2000, here is a guidance of how t

Which configurations are required for logging in to an ONT through web pages? Which is a common question that you will meet when you use ONT. This article will tell you how to do it.

The SmartAX MA5620 Remote Optical Access Unit applies in FTTB and FTTC, which take up the main position in GPON network. Hence, for this kind of equipment, troubleshooting is especially critical.

After the inband management channel between the OLT and the ONU is configured and available, you can log in to the ONU from the OLT to configure the ONU.

This document describes how to activate a VDSL2 port on VDLE board and bind a VSDL2 line profile to the port.

Services can be configured for an optical network unit (ONU) only after the ONU is added to an optical line terminal (OLT).

Huawei MA5600T have several main control boards supported, what’s the difference of these main control boards?

Huawei MA5600T series OLT supports four mainstream GE and 10GE upstream interface board: GICF, GICG, X2CS and X2CK. In this article, we are about to compare these upstream boards.

CGHF CSHF have several versions published, as for CGHF, for now there are four versions H901 H902 H906 and H907available, many customers always ask difference among H901CGHF, H902CGHF, H906CGHF and H907CGHF. Here we will do a comparison for these versions of CGHF.