| Front Panel |
 |
| Specification |
| Function and feature |
Description |
| Basic function |
NS4 converts signals as follows: |
| 80xODU0/80xODUflex/40xODU1/10xODU2/10xODU2e/2xODU3/1xODU4<->1xOTU4 |
| Supports mixed transmission of ODU0, ODU1, ODUflex, ODU2, ODU2e, and ODU3 signals. |
| Cross-connect capabilities |
Supports the cross-connection of 80 channels of ODU0/ODUflex signals or 40 channels of ODU1 signals or ten channels of ODU2/ODU2e signals or two channels of ODU3 signals or one channel of ODU4 signals between the NS4 and the cross-connect board. |
| OTN function |
Supports the OTU4 interface on the WDM side. |
| Supports the OTN frame format and overhead processing by referring to the ITU-T G.709. |
| OTU4 layer: supports the SM function. |
| ODUk (k=0, 1, 2, 3, 4, flex) layer: supports the PM and TCM function, and PM and TCM non-intrusive monitoring functions. |
| WDM specification |
Supports DWDM specifications. |
| Tunable wavelength function |
The WDM side optical signals can be carried over wavelengths in the extended C band. |
| TN96NS4:Supports 50 GHz and 37.5 GHz channel spacing designs. A total of 96 wavelengths can be configured for 50 GHz channel spacing and 128 wavelengths for 37.5 GHz channel spacing. |
| TN97NS4:Supports 100 GHz,50 GHz, and 37.5 GHz channel spacing designs. A total of 48 wavelengths can be configured for 100 GHz channel spacing ,96 wavelengths can be configured for 50 GHz channel spacing, and 128 wavelengths for 37.5 GHz channel spacing. |
| ESC function |
Supported. |
| Engineering order wire function |
Supports transmitting engineering order wire signal(including one E1,one orderwire phone, and one F1) over ESC channels. |
| PRBS function |
Supports the PRBS function on the WDM side. |
| LPT function |
Not supported |
| FEC coding |
Supports SDFEC2 on the WDM side. |
| NOTE: |
| Boards that use different FEC modes cannot interconnect with each other. |
| Alarms and performance events monitoring |
Monitors BIP8 bytes (Bursty mode) to help locate line failures. |
| Monitors parameters such as the bias current, temperature, and optical power of the laser. |
| Monitors OTN alarms and performance events. |
| Regeneration board |
The WDM-side signals of the TN96NS4T31 board can be regenerated by another TN96NS4T31 board. |
| The WDM-side signals of the TN97NS4T31 board can be regenerated by another TN97NS4T31 board. |
| ALS function |
Not supported |
| Latency measurement |
TN96NS4: supports the PM Latency measurement. |
| TN97NS4: supports the PM and TCM Latency measurement. |
| Test frame |
Not supported |
| IEEE 1588v2 |
Not supported |
| Physical clock |
Not supported |
| Optical-layer ASON |
Not supported |
| Electrical-layer ASON |
Supported |
| Protection scheme |
Supports ODUk SNCP. |
| Supports intra-board 1+1 protection (when working with the QCP or OLP or DCP board). |
| Supports tributary SNCP protection. |
| NOTE: |
| Only the TN96NS4 board supports intra-board 1+1 protection. |
| When the cross-connect granularity is ODUflex, the board does not support tributary SNCP protection. |
| Loopbacka |
WDM side Loopback |
ODU0 Channel Loopback |
ODU1 Channel Loopback |
ODU2 Channel Loopback |
ODU3 Channel Loopback |
ODUflex Channel Loopback |
| Supported |
Supported |
Supported |
Supported |
Supported |
Supported |
| a: The Loopback function of the TN97NS4 board only can be set at the IN1/OUT1 optical ports. |
Reviews
There are no reviews yet.
There are no reviews yet.