My Cart

Mini Cart

TNF1CE6
TNF1CE6

TNF1CE6

PN: AAE9124F
RFQ
Huawei OSN1800V 6-port Encrypted Multiplexing Optical Wavelength Conversion Board
- +
Hardware Tested

Hardware Tested x

In order to avoid hardware malfunction, each equipment will be strictly tested before delivery and the test report will be packed inside equipment and delivered together.Learn More

Hardware Compatibility

Hardware Compatibility x

Backed up by our experienced pre-sales support team, and volume documentation, to avoid purchasing incompatible hardware.

Software Compatibility

Software Compatibility x

Software compatibility test between active/standby system board, main control board and service board, mother/sub-card; system commissioning test to prevent all software conflicts.

Overview

TNF1CE6 6-port Encrypted Multiplexing Optical Wavelength Conversion Board

Applied to Huawei OSN1800 I, OSN1800 II, OSN 1800V

Supports intra-board 1+1 protection, client 1+1 protection, ODUk SNCP (k = 0, 1, 2, flex), LPT

Supports ALS

Supports transparent transmission of synchronous Ethernet clocks. The clock quality complies with ITU-T G.8261

Supports ESC communication

The line side of the CE6 board supports the FEC and AFEC-2 modes

 

TNF1CE6 is a 6-port encrypted multiplexing optical wavelength conversion board applied to Huawei OSN1800 I, OSN1800 II, OSN 1800V. The CE6 is mainly used to map six channels of Any service signals at a rate in the range of 125 Mbit/s to 10.5 Gbit/s into one OTU2 signals and convert the converged OTU2 signals into signals borne on a standard DWDM wavelength compliant with ITU-T G.694.1 or signals borne on a standard CWDM wavelength compliant with ITU-T G. 694.2. The board also performs the reverse process.

Tech Specs
Front Panel
There are ports on the front panel of the board.

Specifications
Basic functions

Working modes of ports

The CE6 board supports the following working modes:

 

ODU0 non-convergence mode: 6 x Any (125 Mbit/s-1.25 Gbit/s) <-> 1 x OTU2

 

ODU1 non-convergence mode: 4 x Any (125 Mbit/s-2.12 Gbit/s) <-> 1 x OTU2

 

ODUflex non-convergence mode: 2 x FC400/FICON 4G <-> 1 x OTU2 or 1 x FC800/FICON 8G/InfiniBand 5G <-> 1 x OTU2

 

ODU2 non-convergence mode: 10GE LAN/1 x FC1200/FICON 10G <-> 1 x OTU2

Cross-connections

Intra-board cross-connections:

 

When the ports on the board work in ODU0 non-convergence mode, the board achieves intra-board ODU0 cross-connections.

 

When the ports on the board work in ODU1 non-convergence mode, the board achieves intra-board ODU1 cross-connections.

 

When the ports on the board work in ODUflex non-convergence mode, the board achieves intra-board ODUflex cross-connections.

 

When the ports on the board work in ODU2 non-convergence mode, the board achieves intra-board ODU2 cross-connections.

Inter-board cross-connections: not supporte

Service encryption Services received at the client side are encrypted using the AES256 and Diffie-Hellman encryption algorithms.
Service types

Ethernet services: FE optical/electrical signal, GE optical/electrical signal, and 10GE LAN.

 

SAN services: FC100, FC200, FC400, FC800, FC1200, FICON, FICON4G, FICON8G, FICON10G, and FICON EXPRESS, InfiniBand 5G (not supported when the system control board is F1SCC)

Service encapsulation mode

TTT-GMP for GE services

Bit transparent transmission for 10GE LAN services

Initial Board Version Supported by System Control Board 1800 V-TNF5UXCM/TNF5UXCME/TNZ5UXCMS/TNF5XCH-V100R006C20

1800 V-TNZ8XCH-V100R009C00SPC700

 

NOTE:

Only the TNF1CE6 boards manufactured since June 2016 can adapt to the 1800 V

Client-Side Pluggable Optical Module

eSFP-155M-1310nm-SMF-15km

eSFP-155M-1310nm-SMF-40km

eSFP-155M-1550nm-SMF-80km

eSFP-2.5G-1310nm-SMF-2km

eSFP-2.5G-1310nm-SMF-15km

eSFP-2.5G-1310nm-SMF-40km

eSFP-2.5G-1550nm-SMF-80km

eSFP-155M-1310nm-MMF-2km

eSFP-2.125G-850nm-MMF-0.5km-I

eSFP-1.25G-1310nm-SMF-10km

eSFP-1.25G-1310nm-SMF-40km

eSFP-1.25G-1550nm-SMF-80km-01

eSFP-1.25G-TX1310/RX1490nm(BIDI)-SMF-10km

eSFP-1.25G-TX1490/RX1310nm(BIDI)-SMF-10km

eSFP-1.25G-TX1310/RX1490nm(BIDI)-SMF-40km

eSFP-1.25G-TX1490/RX1310nm(BIDI)-SMF-40km

eSFP-4.25G-850nm-MMF-0.3km-I

eSFP-4.25G-1310nm-SMF-10km

SFP+ -8.5G to 10.5G-850nm-MMF-0.3km

SFP+ -10G(10GE,LR/LW)-1310nm-SMF

SFP-100Base-T-autonegotiation-100 m-RJ45

SFP-1000Base-T-autonegotiation-100 m-RJ45

SFP+ -10G(with CDR)-1310nm-SMF-10km

SFP+ -6.144G-1310nm-SMF-10km-I

SFP+ -6.144G-850nm-MMF-0.12km-I

WDM-Side Pluggable Optical Module

XFP-10G-(1529.17nm to 1560.61nm)(DWDM,50GHz,Tunable)-SMF-80km

XFP-10G-850nm-MMF-0.3km

XFP-10G-(1529.17nm to 1560.20nm)(DWDM,100GHz,Fixed)-SMF-40km

XFP-10G-(1529.17nm to 1560.61nm)(DWDM,50GHz,Tunable)-SMF-40km

XFP-10G-(1529.17nm to 1560.61nm)(DWDM,100GHz)-SMF-80km

XFP-10G-1310nm-SMF-10km

XFP-10G-1550nm-SMF-40km

XFP-10G-1550nm-SMF-80km

Mechanical Specifications
Typical Power Consumption(W) 32.6
Maximum Power Consumption(W) 37.6
Dimension (W x H x D, mm)

193.8 x 19.8 x 205.9

Weight(kg) 0.75 kg

 

 

Q&A

Q: How many hardware versions does CE6 have? 

A: The available hardware version of the CE6 board is TNF1


Q: Can I return/exchange board if not compatible with my system?

A: Yes, please tell our sales team your system and main control board version, before purchase.


Q: The board is new or refurbished? 

A: Yes, it is original new, not been used.


Reviews
Write Your Own Review
You're reviewing:TNF1CE6
Your Rating:
Why Thunder-link.com
  • 9 Years Experience

  • Premium Quality GuaranteedValue over price

  • Value over price

  • Tailored Technical Support

  • One Stop Solution

  • Official Document Resource

  • 1 Year Warranty Guaranteed

  • Fast Global Shipping

  • Flexible Payment