![Icon [all products]](https://www.thunder-link.com/tl-content/uploads/2022/05/Icon-all-products-1.svg "Icon [all products]"){kind=icon}
All products
in stock 3-5 days lead time
TNF2LTX
Huawei OSN1800V 10-port Multi-Rate Wavelength Conversion Board
20
People watching this product now!
Hardware Compatibility
Hardware Compatibility x
Backed up by our experienced pre-sales support team, and volume documentation, to avoid purchasing incompatible hardware.
Hardware Tested
Hardware Tested x
In order to avoid hardware malfunction, each equipment will be strictly tested before delivery and the test report will be packed inside equipment and delivered together. Learn more
Software Compatibility
Software Compatibility x
Software compatibility test between active/standby system board, main control board and service board, mother/sub-card; system commissioning test to prevent all software conflicts.
Huawei WDM-OTN Equipment Test Procedure
In this topic, we take Huawei OSN 8800 as example to show you how to test the WDM/OTN equipment (Huawei OSN 6800 etc)Description
TNF2LTX 10-port multi-rate wavelength conversion board
Applied to Huawei 1800 I&II Compact, 1800 II Enhanced, OSN 1800V
Supports intra-board 1+1 protection
Supports SDFEC2, FEC.
Supports communication over ESCs
Supports optical-layer ASON when working with Z5UXCMS/Z2UXCL/Z8XCH
Supports the LPT function only when the client-side service type is 10GE LAN services
TNF1LTX is a 10-port multi-rate wavelength conversion board applied to Huawei 1800 I&II Compact, 1800 II Enhanced, OSN 1800V. The LTX board is an optical transponder board that has a rate of 100 Gbit/s on the WDM side. It applies to metro 100G transmission systems, maps the optical signals received on the client side to one OTU4 signal, and performs mutual conversion between the OTU4 signal and the optical signal carried over an ITU-T-compliant WDM wavelength.
Tech Specs
| Front Panel | ||||
| There are ports on the front panel of the board.
|
||||
| Specifications (in OTU mode) | ||||
| Basic functions | Working modes of LTX boards and their ports | F2LTX/F3LTX:
1. Board Mode is set to Common Mode or MPO mode. The board ports support the ODU2, ODU3, and ODUflex modes.
NOTE: In MPO mode, 40GE services cannot be transmitted from the ports TX7/RX7 to TX10/RX10 on the local F2LTX/F3LTX board to the port TX11/RX11 on the peer F2LTX/F3LTX board.
2. The mapping paths of the board are as follows: a. STM-64/OC192/10G WAN/FC800/FICON 8G <—> ODU2 <—> ODU4 <—> OTU4 b. 10GE LAN <—> ODU2/ODU2e <—> ODU4 <—> OTU4 c. FC1200/FICON10G/Infiniband 10G <—> ODU2e <—> ODU4 <—> OTU4 d. OTU2/OTU2e <—> ODU2/ODU2e <—> ODU4 <—> OTU4 e. Infiniband2.5G/Infiniband5G/FC 800/FICON 8G/FC1600 <—> ODUflex <—> ODU4 <—> OTU4 f. 40GE <—> ODU3 <—> ODU4 <—> OTU4
NOTE: Only the F3LTX board supports the mapping path of FC3200 <—> ODUflex <—> ODU4 <—> OTU4. |
||
| Cross-connect functionality | Not supported | |||
| Service encryption | TNF2LTX/TNF3LTX: Supports service OPUk payload encryption and decryption.
NOTE: The service encryption function of the board is determined by the board license. |
|||
| Physical clocks | Supports transparent transmission of synchronous Ethernet clock signals, with the clock quality in compliance with ITU-T G.8261, when the LTX board receives 10GE LAN services on the client side and Port Mapping is set to Bit Transparent Mapping (11.1G) for the LTX board. LTX boards cannot process synchronous Ethernet clock signals. | |||
| Specifications (in regeneration mode) | ||||
| Basic function | The board is used in an electrical REG station in the system to implement electrical regeneration of optical signals. The board mode parameter of the LTX board must be set to electrical relay mode. | |||
| Regenerating rate | OTU4: OTN service at a rate of 111.81 Gbit/s | |||
| Alarms and performance events monitoring | Monitors B1, section monitoring (SM)_bit interleaved parity 8 (BIP8), and path monitoring (PM)_BIP8 bytes to help locate line failures.
Monitors performance parameters and alarm signals, including the monitoring of laser bias current, laser working temperature and optical power on the WDM side. Supports CD and PMD performance monitoring. The F2LTX/F3LTX board supports temperature detection. |
|||
| Client-Side Pluggable Optical Module | ||||
| SFP+ -10G(with CDR)-1310nm-SMF-10km
SFP+ -10G(with CDR)-1550nm-SMF-40km SFP+ -10G(10GE,LR/LW)-1310nm-SMF-10km SFP+ -8.5G to 10.5G-850nm-MMF-0.3km SFP+ -2.5G to 11.3G-TX1270/RX1330nm(BIDI)-SMF-10km-I SFP+ -2.5G to 11.3G-TX1330/RX1270nm(BIDI)-SMF-10km-I SFP+ -2.5G to 11.3G-TX1270/RX1330nm(BIDI)-SMF-40km-I SFP+ -2.5G to 11.3G-TX1330/RX1270nm(BIDI)-SMF-40km-I SFP+ -10G(with CDR)-(1471nm to 1611nm)(CWDM)-SMF-70km-I SFP+ -10G-(1529.17nm to 1560.61nm)(DWDM,50GHz,Tunable)-SMF-80km SFP+ -6.144G-850nm-MMF-0.12km-I SFP+ -6.144G-1310nm-SMF-10km-I SFP+ -14G-850nm-MMF-0.1km SFP28-28.05G-1310nm-SMF-10km SFP28-28.05G-850nm-MMF-0.1km QSFP+ -40G(4x10G)-1271nm to 1331nm(CWDM,LR4)-SMF-10km QSFP+ -40G(4x10G)-1310nm(PSM4)-MPO-SMF-10km QSFP+ -40G(4x10G)-850nm(SR4)-MPO-MMF-0.15km SFP+ -10G(with CDR)-1310nm-SMF-10km SFP+ -10G(with CDR)-1550nm-SMF-40km SFP+ -10G(10GE,LR/LW)-1310nm-SMF-10km SFP+ -8.5G to 10.5G-850nm-MMF-0.3km QSFP+ -41.25Gbit/s-TX(850nm,900nm)/RX(900nm,850nm)-SRBD-MMF-0.1km |
||||
| WDM-Side Pluggable Optical Module | ||||
| CFP-100G(4x25G/28G,Dualrate)-1295nm to 1310nm(LR4)-SMF-10km-SP
CFP-100G-(1529.17nm to 1567.1nm)(DWDM,Tunable, high optical power, T65)-SMF CFP-100G-(1529.17nm to 1567.1nm)(DWDM,Tunable,high optical power, T69)-SMF CFP-100G-(1529.17nm to 1567.1nm)(DWDM,Tunable, T5U)-SMF 100000ps/nm-C band-Tunable Wavelength-ePDM-QPSK(SDFEC2, SLH, T51)-100G CFP 100000ps/nm-C band-Tunable Wavelength-ePDM-QPSK(SDFEC2, wDCM, ULH, T61)-100G CFP 100000ps/nm-C band-Tunable Wavelength-ePDM-QPSK(SDFEC2, SLH, high optical power, T51)-100G CFP |
||||
| Version description of the LSX board | ||||
| Board | Product Applicable-System Control Board-Initial Board Version Supported by System Control Board | |||
| TNF2LTX | 1800 I&II Compact-TNF3SCC-V100R006C20
1800 V-TNF5UXCM/TNF5UXCME/TNF5XCH/TNZ5UXCMS-V100R006C20 1800 V-TNZ8XCH-V100R009C00SPC700 1800 II Enhanced-TNZ1UXCL-V100R007C10 1800 II Enhanced-TNZ2UXCL-V100R008C00SPC600 |
|||
| Mechanical Specifications | ||||
| Typical Power Consumption(W) | 105 (OTU mode) / 115 (regeneration mode) | |||
| Maximum Power Consumption(W) | 87 (OTU mode) / 95 (regeneration mode) | |||
| Dimension (W x H x D, mm) | 193.8 x 40.1 x 205.9 | |||
| Weight(kg) | 1.60 kg | |||
Additional information
| Weight | 4.0 kg |
|---|---|
| Dimensions | 37.5 × 34.0 × 11.0 cm |
| Bandwidth |
10G |
| Features |
Hardware Compatibility, Hardware Tested, Software Compatibility |
| Port |
1-10 |
Q&A
Reviews (0)
Why Thunder-link.com
10 Years Experience
As a global leading professional Huawei network hardware and solution provider, we have delivered Huawei, ZTE, Nokia, CISCO, Fiberhome, etc, equipment to 500+ customer groups in 90+ countries over the past 10 years. Know more
Reviews
There are no reviews yet.