![Icon [all products]](https://www.thunder-link.com/tl-content/uploads/2022/05/Icon-all-products-1.svg "Icon [all products]"){kind=icon}
All products
0 in stock 3-5 days lead time
TNF5TQX
Huawei OSN1800V 4-port 10G Tributary Service Pprocessing Board
18
People watching this product now!
Hardware Compatibility
Hardware Compatibility x
Backed up by our experienced pre-sales support team, and volume documentation, to avoid purchasing incompatible hardware.
Hardware Tested
Hardware Tested x
In order to avoid hardware malfunction, each equipment will be strictly tested before delivery and the test report will be packed inside equipment and delivered together. Learn more
Software Compatibility
Software Compatibility x
Software compatibility test between active/standby system board, main control board and service board, mother/sub-card; system commissioning test to prevent all software conflicts.
Huawei WDM-OTN Equipment Test Procedure
In this topic, we take Huawei OSN 8800 as example to show you how to test the WDM/OTN equipment (Huawei OSN 6800 etc)Description
TNF5TQX 4-port 10G tributary service processing board
Applied to Huawei OSN 1800V
Supports client 1+1 protection when non-OTN services are received
Supports ODUk SNCP (k = 2 or flex)
Supports Tributary SNCP
Supports the LPT
Supports communication over ESCs
TNF5TQX is a 4-port 10G tributary service processing board applied to Huawei OSN 1800V. As a type of tributary board, the TQX board converts between four channels of optical signals at a rate in the range of 8 Gbit/s to 10 Gbit/s and four ODU2/ODU2e/ODUflex electrical signals through cross-connections
Tech Specs
| Front Panel | ||||
| There are ports on the front panel of the board.
|
||||
| Specifications | ||||
| Basic functions | Working modes of TQX boards and their ports | TQX boards support the following port working modes:
1.ODU2 non-convergence mode: a. 4 x STM-64/OC-192/10GE LAN/10GE WAN/FC800/FICON 8G/OTU2<->4 x ODU2 b. 4 x 10GE LAN/FC1200/FICON 10G/OTU2e<->4 x ODU2e
2.ODUflex non-convergence mode: 4 x FC800/10GE LAN<->4 x ODUflex
NOTE: TQX boards do not support the setting of the board working mode. Each FC800 service uses seven timeslots of an ODUflex. The timeslot number of an ODUflex for each 10GE LAN service needs to be manually calculated based on its service rate. |
||
| Cross-connect functionality | Supports cross-connection for four channels of ODU2, ODU2e, or ODUflex signals through a cross-connect board and the bus on the backplane. | |||
| Maximum frame length (MFL) for a port | The value ranges from 1518 to 9600 (bytes).
NOTE: TQX boards provide the maximum frame length (MFL) for a port function only when receiving 10GE LAN services on the client side. When Port Mapping is set to Bit Transparent Mapping(11.1G), Maximum Frame Length is unavailable on the NMS. |
|||
| Client-Side Pluggable Optical Module | ||||
| XFP-10G-850nm-MMF-0.3km
XFP-10G-1310nm-SMF-10km XFP-10G-1550nm-SMF-40km XFP-10G-1550nm-SMF-80km XFP-10G-TX1270/RX1330nm(BIDI)-SMF-10km XFP-10G-TX1330/RX1270nm(BIDI)-SMF-10km XFP-10G-TX1270/RX1330nm(BIDI)-SMF-40km XFP-10G-TX1330/RX1270nm(BIDI)-SMF-40km XFP-8.5G/10G-1310nm-10km-SM SFP+ -10G-(1471nm to 1611nm)(CWDM)-SMF-70km |
||||
| Version description of the TQX board | ||||
| Board | Product Applicable-System Control Board-Initial Board Version Supported by System Control Board | |||
| TQX | 1800 V-TNF5UXCM/TNF5XCH-V100R005C00
1800 V-TNF5UXCME-V100R005C20 |
|||
| Mechanical Specifications | ||||
| Typical Power Consumption(W) | 36 | |||
| Maximum Power Consumption(W) | 39 | |||
| Dimension (W x H x D, mm) | 193.8 x 19.8 x 205.9 | |||
| Weight(kg) | 1.0 kg | |||
Additional information
| Weight | 3.0 kg |
|---|---|
| Dimensions | 37.5 × 34.0 × 7.5 cm |
| Bandwidth |
10G |
| Features |
Hardware Compatibility, Hardware Tested, Software Compatibility |
| Port |
1-10 |
Q&A
Reviews (0)
Why Thunder-link.com
Reviews
There are no reviews yet.