![Icon [all products]](https://www.thunder-link.com/tl-content/uploads/2022/05/Icon-all-products-1.svg "Icon [all products]"){kind=icon}
All products
0 in stock 3-5 days lead time
TNF6HSNQ2
Huawei OSN1800V 4-port 10G Universal Line Service Processing Board
17
People watching this product now!
Hardware Compatibility
Hardware Compatibility x
Backed up by our experienced pre-sales support team, and volume documentation, to avoid purchasing incompatible hardware.
Hardware Tested
Hardware Tested x
In order to avoid hardware malfunction, each equipment will be strictly tested before delivery and the test report will be packed inside equipment and delivered together. Learn more
Software Compatibility
Software Compatibility x
Software compatibility test between active/standby system board, main control board and service board, mother/sub-card; system commissioning test to prevent all software conflicts.
Huawei WDM-OTN Equipment Test Procedure
In this topic, we take Huawei OSN 8800 as example to show you how to test the WDM/OTN equipment (Huawei OSN 6800 etc)Description
TNF6HSNQ2 4-port 10G universal line service processing board
Applied to Huawei OSN 1800V and 1800 II Enhanced
Supports OTN and SDH service, and functions such as OTN ports, and SDH overhead processing.
Supports Intra-Board 1+1 Protection, Tributary SNCP, ODUk SNCP (k = 0, 1, 2, or flex)
Supports Physical Clocks (ODU0/ODU1/ODUflex)
Supports ESC communication
Supports Electrical-layer ASON
Supports inloops and outloops on VC-4 paths.
TNF6HSNQ2 is a 4-port 10G universal line service processing board applied to Huawei OSN 1800 II Enhanced, OSN 1800V. The HSNQ2 board is a universal line board and supports hybrid transmission of ODU0, ODU1, ODU2, ODU2e, ODUflex, VC-12, VC-3, and VC4 with the total bandwidth not exceeding 40 Gbit/s (the total bandwidth of SDH services does not exceed 20 Gbit/s). The HSNQ2 board processes and converts the received service signals into four OTU2/OTU2e signals, which are carried over four ITU-T G.694.1-compliant DWDM wavelengths.
Tech Specs
| Front Panel | ||||
| There are ports on the front panel of the board.
|
||||
| Basic functions | ||||
| OTN signals | 32 x ODU0/16 x ODU1/4 x ODU2/32 x ODUflex<->4 x OTU2 (OTU is the abbreviated form of optical channel transport unit.)
4 x ODU2e<->4 x OTU2e (Only for pure OTN signals) 32 x ODU0<->16 x ODU1<->4 x ODU2<->4 x OTU2 |
|||
| SDH signals | 8 x STM-16<->8 x ODU1<->2 x ODU2<->2 x OTU2
2 x STM-64<->2 x ODU2<->2 x OTU2 NOTE: For 1800 II Enhanced, a TNF6HSNQ2 board supports at most 5 Gbit/s bandwidth of SDH services |
|||
| Clock synchronization | OTN services: Supported (ODU0/ODU1/ODUflex)
SDH services: SDH clock synchronization is supported when SDH virtual ports are configured. |
|||
| Specifications (OTN functions) | ||||
| Basic functions | Cross-connect functionality | Implements service grooming when working with cross-connect boards.
32 x ODU0/16 x ODU1/32 x ODUflex/4 x ODU2/4 x ODU2e |
||
| Maintenance features | Loopbacks | Supports inloops and outloops at WDM-side ports.
Supports inloops and outloops on ODU0, ODU1, and ODUflex channels. |
||
| Pseudo random binary sequence (PRBS) test function | Supports the PRBS test function on WDM and system sides. | |||
| Test frames | Not supported | |||
| Delay measurement (DM) | TNF6HSNQ2: Supported | |||
| Alarms and performance events monitoring | Monitors parameters such as the bias current, operating temperature, and optical power of a laser.
Monitors OTN alarms and performance events. Monitors bit interleaved parity 8 (BIP8) bytes (Bursty mode) to help locate line failures. |
|||
| Specifications (SDH functions) | ||||
| Service processing | Supports VC-12, VC-3, VC-4, VC-4-4c, VC-4-64c, and VC-4-16c services (VC-4-4c, VC-4-64c, and VC-4-16c services are concatenated services). | |||
| Overhead processing | Processes section overheads of STM-16/STM-64 signals.
Transparently transmits and terminates path overheads. Supports the setting and querying of J0 (to be received), J1, and C2 bytes. Provides transparent DCCs and orderwire byte channels. |
|||
| Protection schemes | TNF6HSNQ2:
SNCP protection: supported 1:N linear MSP: supported Two-fiber bidirectional MS ring protection: not supported |
|||
| WDM-Side Pluggable Optical Module | ||||
| XFP-10G-1310nm-SMF-10km
XFP-10G-1550nm-SMF-40km XFP-10G-1550nm-SMF-80km XFP-10G-(1529.17nm to 1560.20nm)(DWDM,100GHz,Fixed)-SMF-40km XFP-10G-(1529.17nm to 1560.61nm)(DWDM,100GHz)-SMF-80km XFP-10G-(1529.17nm to 1560.61nm)(DWDM,50GHz,Tunable)-SMF-40km XFP-10G-(1529.17nm to 1560.61nm)(DWDM,50GHz,Tunable)-SMF-80km XFP-10G-(1471nm to 1611nm)(CWDM)-SMF-70km |
||||
| Version description of the HSNQ2 board | ||||
| Board | Product Applicable-System Control Board-Initial Board Version Supported by System Control Board | |||
| TNF6HSNQ2 | 1800 V-TNF5UXCM/TNF5UXCME/TNZ5UXCMS/TNF5XCH-V100R007C00
1800 V-TNZ8XCH-V100R009C00SPC700 1800 II Enhanced-TNZ1UXCL-V100R007C10 1800 II Enhanced-TNZ2UXCL-V100R008C00SPC600 |
|||
| Mechanical Specifications | ||||
| Typical Power Consumption(W) | 63 | |||
| Maximum Power Consumption(W) | 69 | |||
| Dimension (W x H x D, mm) | 193.8 x 19.8 x 205.9 | |||
| Weight(kg) | 0.8 | |||
Additional information
| Weight | 3.0 kg |
|---|---|
| Dimensions | 37.5 × 34.0 × 7.5 cm |
| Bandwidth |
10G |
| Features |
Hardware Compatibility, Hardware Tested, Software Compatibility |
| Port |
1-10 |
Q&A
Q: What hardware versions are available for HSNQ2?
A: HSNQ2 is available for TNF5 and TNF6.
Q: Can I use TNF6HSNQ2 on both OSN1800 V and OSN8800 II?
A: Yes, TNF6HSNQ2 can be supported on OSN1800 V and OSN1800 II Enhanced subrack.
Q: Are there any system control board software version restrictions if I need use HSNQ2 on OSN1800V or OSN1800 II?
A: Yes, HSNQ2 needs match with relative system control board and versions when deploying.
| Board | Product Applicable-System Control Board-Initial Board Version Supported by System Control Board |
| TNF5HSNQ2 |
1800 V-TNF5UXCM/TNF5XCH-V100R005C10 1800 V-TNF5UXCME-V100R005C20 |
| TNF6HSNQ2 |
1800V-TNF5UXCM/TNF5UXCME/TNZ5UXCMS/TNF5XCH-V100R007C00 1800 V-TNZ8XCH-V100R009C00SPC700 1800 V-TNZ5XCS-V100R019C10SPC300 1800 II Enhanced-TNZ1UXCL-V100R007C10 1800 II Enhanced-TNZ2UXCL-V100R008C00SPC600 |
For OSN1800 V:
- TNF5HSNQ2, TNF6HSNQ2 inserted on a slave subrack can function only as a pure OTN board.
- TNF5HSNQ2 supports only OTN features when it is used together with the TNF5XCH board.
- TNF6HSNQ2 supports only OTN features when it is used together with the TNZ8XCH board.
For 1800 II Enhanced, a TNF6HSNQ2 supports at most 5 Gbit/s bandwidth of SDH services, and does not support STM-64–>ODU2–>OTU2, only supports STM-16–>ODU1–>ODU2–>OTU2.
Q: Does HSNQ2 support Over-temperature protection
A: TNF5HSNQ2 supports, TNF6HSNQ2 does not support.
Q: What is the difference between HSNQ2 and UNQ2?
A: HSNQ2 supports OTN and SDH, functions such as OTN ports and SDH overhead processing.
While UNQ2 supports OTN, SDH, and packet services, functions such as Layer 2 switching, OTN ports, and SDH overhead processing.
Reviews (0)
Why Thunder-link.com
Reviews
There are no reviews yet.