| Front Panel |
| There are indicators and ports on the front panel of the board.
|
| Basic functions |
| Line mode |
OTN |
80 x ODU0<->ODU4<->OTU4
40 x ODU1<->ODU4<->OTU4
10 x ODU2<->ODU4<->OTU4
10 x ODU2e<->ODU4<->OTU4
ODU4<->OTU4
ODUflex(n=1, 80)<->ODU4<->OTU4
|
| SDH |
8 x STM-16<->8 x ODU1<->1 x ODU4<->1 x OTU4
2 x STM-64<->2 x ODU2<->1 x ODU4<->1 x OTU4
|
| Regeneration mode |
– |
1 x OTU4<->1 x OTU4 |
| Clock synchronization |
OTN services: Supported (ODU0/ODU1/ODU2/ODUflex)
SDH services: SDH clock synchronization is supported when SDH virtual ports are configured. |
| IEEE 1588v2 |
Not supported |
| Specifications (OTN functions) |
| Basic functions |
Supports conversion of the following signals:
80 x ODU0/80 x ODUflex/40 x ODU1/10 x ODU2/10 x ODU2e/1 x ODU4<->1 x OTU4
Supports hybrid transmission of ODU0, ODU1, ODU2, ODU2e, and ODUflex signals.
|
| Cross-connect functionality |
Implements the following service grooming when working with cross-connect boards: 80 x ODU0/ODUflex, 40 x ODU1, 10 x ODU2/ODU2e, 1 x ODU4. |
| OTN function |
Supports OTU4 interfaces on the WDM side.
Adopts the frame formats and overhead processing methods defined in ITU-T G.709.
Supports the SM function at the OTU4 layer.
Supports the PM and TCM functions at the ODUk (k = 0, 1, 2, 2e, 3, 4, or flex) layer, and non-intrusive monitoring of PM and TCM overheads. |
| Performance and alarm monitoring |
Monitors BIP8 bytes (burst mode) to help locate line failures.
Monitors parameters such as the bias current, operating temperature, and optical power of a laser.
Monitors OTN alarms and performance events. |
| Protection scheme |
Supports ODUk SNCP.
Supports intra-board 1+1 protection (when working with the OLP board).
Supports tributary SNCP protection.
NOTE:
When the cross-connect granularity is ODUflex, the board does not support tributary SNCP protection.
|
| Specifications (SDH functions) |
| Overhead processing |
Processes section overheads of STM-16/STM-64 signals.
Transparently transmits and terminates path overheads.
Supports the setting and querying of J0 (to be received) bytes.
Provides transparent DCCs and orderwire byte channels. |
| Protection schemes |
Supports SNCP protection.
Supports 1+1 linear MSP protection. |
| Service processing |
Supports VC-12, VC-3, VC-4, VC-4-4c, VC-4-16c, and VC-4-64c services. (VC-4-4c, VC-4-16c, and VC-4-64c services are concatenated services.) |
| Loopback |
Supports outloops on VC-12, VC-3 channels, and supports inloops/outloops on VC-4 channels. |
| Performance and alarm monitoring |
Monitors B1 and B2 bytes to help locate line failures. |
| Version description of the UNS4 board |
| Board |
Product Applicable-System Control Board-Initial Board Version Supported by System Control Board |
| TNZ5UNS4 |
1800 V-TNF5UXCM/TNF5UXCME/TNF5XCH-V100R006C20 |
| CFP-100G-(1529.17nm to 1567.1nm)(DWDM,Tunable, high optical power, T65)-SMF Specifications |
| Parameter |
Value |
| Line code format |
ePDM-QPSK(SDFEC2, wDCM-Metro) |
| Transmitter parameter specifications at point S |
| Center frequency (THz) |
191.3 to 196.05 |
| Maximum mean launched power (dBm) |
2 |
| Minimum mean launched power (dBm) |
-3 |
| Center frequency deviation (GHz) |
±2.5 |
| Maximum -10 dB spectral width (nm) |
0.4 |
| Maximum -3 dB spectral width (nm) |
0.3 |
| Dispersion tolerance (back-to-back) (ps/nm) |
12000 |
| TX OSNR(in band) (dB) |
35 |
| Receiver parameter specifications at point R |
| Receiver type |
PIN |
| Operating wavelength range (nm) |
1529 to 1568 |
| Receiver sensitivity (dBm) |
-18 |
| Minimum receiver overload (dBm) |
0 |
| Maximum reflectance (dB) |
27 |
| Mechanical Specifications |
| Typical Power Consumption(W) |
91 (Line Mode) / 89.2 (Regeneration Mode) |
| Maximum Power Consumption(W) |
102.5 (Line Mode) / 98.4 (Regeneration Mode) |
| Dimension (W x H x D, mm) |
193.8 x 40.1 x 205.9 |
| Weight(kg) |
1.70 kg |
![Icon [all products]](https://www.thunder-link.com/tl-content/uploads/2022/05/Icon-all-products-1.svg "Icon [all products]"){kind=icon}
All products
Nguyen
Vietnam
It is so good that we get the 100G card with a test report, then I can send to my client without further checking.
Sevilla
PH
100G card, expensive, but more cost-effective than buy here.