![Icon [all products]](https://www.thunder-link.com/tl-content/uploads/2022/05/Icon-all-products-1.svg "Icon [all products]"){kind=icon}
All products
库存 0 件 Ready to ship
TNG1A212S01
Huawei OSN 9800 M05/M12/M24 12-port Any Service Processing General Board
17
People watching this product now!
Hardware Compatibility
Hardware Compatibility x
Backed up by our experienced pre-sales support team, and volume documentation, to avoid purchasing incompatible hardware.
Hardware Tested
Hardware Tested x
In order to avoid hardware malfunction, each equipment will be strictly tested before delivery and the test report will be packed inside equipment and delivered together. Learn more
Description
TNG1A212S01 12-port 10G Any Service Processing General Board
Applied to Huawei OSN 9800 M05, M12, M24, it supports Tributary Mode, Line Mode, Relay Mode
TNG1A212S01 board supports Alarms and performance events monitoring, FEC coding and ESC function
TNG1A212S01 board supports Loopback Protection scheme, and Physical clock only in Tributary and Line Mode
TNG1A212S01 board supports PRBS test function, Electrical-layer ASON, Test frame in Tributary Mode
The TNG1A212S01 board is a 12-port 10G Any Service Processing General Board. Each of ports IN1/OUT1 to IN10/OUT10 can be used as a tributary port, OTN line port, SDH line port, or line port (in relay mode). Each of ports IN11/OUT11 to IN12/OUT12 can be used as a tributary port or an SDH line port. The A212 board supports a maximum access capacity of 40 Gbit/s SDH services. It supports 2.5G, 8.5G, 10G optical modules etc. and can be configured according to needs.
Tech Specs
| Front Panel | |
 |
|
| Valid Slots | |
| OptiX OSN 9800 M05 Subrack: IU1-IU5 OptiX OSN 9800 M12 Subrack: IU1-IU13 OptiX OSN 9800 M24 subrack: In 1:1 mode: IU1-IU24, In 1:3 mode: IU1-IU5, IU8-IU17, IU20-IU24 |
|
| Initial Version of Different Subrack | |
| M05: V100R019C10SPC600 M12: V100R019C10SPC600 M24: V100R006C00 |
|
| Function and Features | |
| Tributary Mode Function and Feature | Description |
| Basic function | Supports the following service conversions: |
| ODU0 non-convergence mode (Any->ODU0) | |
| 12 x (125 Mbit/s to 1.25 Gbit/s signals) <-> 12 x ODU0. | |
| ODU1 non-convergence mode (Any->ODU1) | |
| 12 x (1.49 Gbit/s to 2.67 Gbit/s signals) <-> 12 x ODU1. | |
| ODU2 non-convergence mode (OTU2/Any->ODU2) | |
| n x 10GE LAN(GFP-F)/10GE WAN/STM-64/OC-192/OTU2/FC800/FICON8G<-> n x ODU2 | |
| n x 10GE LAN(BMP)/OTU2e/FC1200/FICON10G<-> n x ODU2e | |
| ODUflex non-convergence mode (Any->ODUflex) | |
| 12 x 3G-SDI/3G-SDIRBR/FC400/FICON4G/FC800/FICON8G/10GE LAN(GFP-F)<-> 12 x ODUflex | |
| 4 x FC1600<-> 4 x ODUflex | |
| ODU1_ODU0 mode (OTU1->ODU1->ODU0) | |
| 12 x OTU1<-> 24 x ODU0 | |
| ODU1 convergence mode (12*Any->ODU1) | |
| 12 x (125 Mbit/s to 2.5 Gbit/s signals) <-> ODU1 | |
| NOTE: In ODUflex non-convergence mode, when the M24 subrack works in 1:1 cross-connect mode, the board can access a maximum of 100 Gbit/s services; when the M24 subrack works in 1:3 cross-connect mode, the board can access a maximum of 120 Gbit/s services. In ODU2 non-convergence mode, when the M24 subrack works in 1:1 cross-connect mode, n is 10; when the M24 subrack works in 1:3 cross-connect mode, n is 12. |
|
| Cross-connect capabilities | In the 1:1 mode, supports the cross-connection of up to 100 Gbit/s ODUk signals. |
| In the 1:3 mode, supports the cross-connection of up to 120 Gbit/s ODUk signals. | |
| OTN function | Supports the OTN frame format and overhead processing defined by ITU-T G.709. The mapping process complies with ITU-T G.7041, ITU-T G.709 and G.Sup43. |
| ODUflex layer: supports PM overhead processing. | |
| ODU0/ODU1/ODU2 layer: supports PM and TCM overhead processing, and non-intrusive monitoring of PM and TCM overheads. | |
| OTU1/OTU2 layer: supports SM overhead processing. | |
| LPT function | Supported when the client-side service type is FE, GE or 10GE LAN. |
| ALS function | Supports the ALS function on the client side when client services are non-OTN services. |
| Latency measurement | When non-OTN services are received on the client side of the board, the PM section latency measurement is supported in the backplane direction (upstream direction). When OTN services are received on the client side of the board, the TCM section latency measurement is supported in the optical port direction (downstream direction). |
| IEEE 1588v2 | Supports the TC, TC+OC, BC, and OC modes. |
| NOTE: Supports this function when receiving GE (GFP-T) services on the client side. Supports this function when receiving 10GE LAN services on the client side and Port Mapping is set to MAC Transparent Mapping (10.7G). The port equipped with an electrical module does not support IEEE 1588v2. |
|
| ITU-T G.8275.1 | Supports the BC mode. |
| NOTE: Supports this function when receiving GE (GFP-T) services on the client side. Supports this function when receiving 10GE LAN services on the client side and Port Mapping is set to MAC Transparent Mapping (10.7G). The port equipped with an electrical module does not support ITU-T G.8275.1. |
|
| ITU-T G.8273.2 | Supported |
| Port MTU | The value ranges from 1518 to 9600, in bytes. That is, the maximum size of the supported Jumbo frame is 9600 bytes. |
| Ethernet service mapping mode | GE: GE(TTT-GMP), GE(GFP-T) |
| 10GE LAN: Bit Transparent Mapping (11.1G), MAC Transparent Mapping (10.7G) | |
| Line Mode Function and Feature | Description |
| Basic functions | Each port on the A212 board supports the following service conversions: |
| 80 x ODU0/40 x ODU1/80 x ODUflex/10 x ODU2<->10 x OTU2 | |
| 10 x ODU2e<->10 x OTU2e | |
| Each port on the board supports a mix of ODU0, ODU1, and ODUflex signals. | |
| Cross-connect capabilities | Supports the cross-connection of up to 100 Gbit/s ODUk signals. |
| OTN functions | Supports OTU2/OTU2e on the WDM side. |
| Supports the OTN frame format and overhead processing defined by ITU-T G.709. | |
| OTU2 layer: supports SM overhead processing. | |
| ODUk (k=0, 1, 2, flex) layer: supports PM and TCM overhead processing, and non-intrusive monitoring of PM and TCM overheads. | |
| WDM specification | Supports ITU-T G.694.1-compliant DWDM specifications. |
| Tunable wavelength function | Supports tunable wavelength optical modules that provide for 80 wavelengths tunable in the C band with 50 GHz channel spacing. |
| PRBS test function | Supports the PRBS function on the WDM side. |
| Regeneration board | The WDM-side signals of a A212 board can be regenerated by another A212/N210 board. |
| Latency measurement | The board supports latency measurement in the WDM-side optical port direction (upstream direction). When higher-order ODUk cross-connections are created on the line board, TCM section latency measurement is supported for higher-order ODUk channels. When lower-order ODUk cross-connections are created on the line board, PM/TCM section latency measurement is supported for higher-order ODUk channels, and TCM section latency measurement is supported for lower-order ODUk channels. |
| Electrical-layer ASON | Supported |
| Optical-layer ASON | Supported |
| SDH functions and features | Description |
| Overhead processing | Processes the section overheads of the STM-n (n=1, 4, 16, 64) signals. |
| Supports the transparent transmission and termination of the path overheads. | |
| Supports the setting and query of the J0, J1, and C2 bytes. | |
| Supports ECC communication. | |
| Service processing | Supports VC-3, VC-4, and VC-12 services and VC-4-4c, VC-4-16c, and VC-4-64c concatenation services. |
| ALS function | Supported |
| SDH Clock Synchronization | Supported |
| Outband DCN | Supported |
| Relay Mode Function and Features | Description |
| Basic function | Electrically regenerates optical signals at an electrical REG station. |
| Supported service rate | OTU2: OTN service at a rate of 10.71 Gbit/s |
| OTU2e: OTN service at a rate of 11.1 Gbit/s | |
| OTN function | Supports OTU2/OTU2e interface the WDM side. |
| Supports the OTN frame format and overhead processing defined by ITU-T G.709. | |
| OTU2 layer: supports SM overhead processing. | |
| ODU2 layer: supports PM and TCM overhead processing, and non-intrusive monitoring of PM and TCM overheads. | |
| WDM specification | Supports DWDM specifications. |
| Tunable wavelength function | Supports tunable wavelength optical modules that provide for: |
| 40 wavelengths tunable in the C band with 100 GHz channel spacing | |
| 80 wavelengths tunable in the C band with 50 GHz channel spacing | |
| Optical-layer ASON | Supported |
| Mechanical Specifications | |
| Dimensions (W x H x D, mm) | 237.1 x 30.5 x 220.0 |
| Weight (kg) | 1.6 |
| Typical Power Consumption (W) | 113 |
| Maximum Power Consumption (W) | 120 |
其他信息
| Bandwidth |
10G |
|---|---|
| Features | |
| Port |
12-24 |
用户评价 (0)
Why Thunder-link.com
评价
目前还没有评价