Huawei OSN 9800 M05/M12/M24 2x100G Wavelength Conversion Board
0 in stock Ready to ship
Hardware Compatibility x
Backed up by our experienced pre-sales support team, and volume documentation, to avoid purchasing incompatible hardware.
Hardware Tested x
In order to avoid hardware malfunction, each equipment will be strictly tested before delivery and the test report will be packed inside equipment and delivered together. Learn more
TNG1M402C01 2x100G service multiplexing into 1x200G/100G programmable wavelength conversion board
Apply to OSN 9800 M05, OSN 9800 M12 and OSN 9800 M24, it supports Line mode, multi-functionmode and regeneration mode
TNG1M402C01 is mainly used to achieve wavelength tunable and to provide OTN interfaces and ESC
The client side supports the PRBS function only when OTU4 services are received
Supports client 1+1 protection
Supports intra-board 1+1 protection (implemented with optical protection boards
When a MPO module is used on the client side, the M402 board does not support client 1+1 protection
When 100GE services are received on the client side, client 1+1 protection supports bidirectional switching rather than unidirectional switching. When OTU4 services are received on the client side, client 1+1 protection supports unidirectional switching
The M402 board is a wavelength conversion board and applies to coherent systems. In the receive direction, the M402 board receives four types of signals on the client side, which are 4 x 10GE, 40GE, OTU4 and 100GE, maps these optical signals into an OTUC2 or OTU4 signal, and converts the OTUC2 or OTU4 signal into a standard WDM wavelength
Front Panel | ||
Valid Slots | ||
OptiX OSN 9800 M12 subrack:In 1:1 mode: IU1-IU13
OptiX OSN 9800 M24 subrack:In 1:1 mode: IU1-IU24; In 1:3 mode: IU1-IU5, IU8-IU17, IU20-IU24 OptiX OSN 9800 M05 Subrack: IU1-IU5 |
||
Initial version of different subrack: | ||
M24: V100R006C10 M12: V100R007C00SPC700 M05: V100R019C10SPC600 |
||
Functions and features (Line mode) | ||
Basic functions | The M402 board on the client side receives two types of signals, which are OTU4 and 100GE. The M402 converts signals as follows: | |
200G line: | ||
2 x OTU4 <-> 2 x ODU4 <-> 1 x ODUC2 <-> 1 x OTUC2 | ||
2 x 100GE <-> 2 x ODU4 (Bit transparent mapping/MAC transparent mapping) <-> 1 x ODUC2 <-> 1 x OTUC2 | ||
2 x 100GE <-> 2 x ODUflex (MAC transparent mapping) <-> 2 x ODU4 <-> 1 x ODUC2 <-> 1 x OTUC2 | ||
ODU0 non-convergence mode | ||
100G line: | ||
1 x OTU4 <-> 1 x ODU4 <-> 1 x OTU4 | ||
1 x 100GE <->1 x ODU4 (Bit transparent mapping/MAC transparent mapping) <-> 1 x OTU4 | ||
2 x 100GE <-> 2 x ODUflex (MAC transparent mapping) <-> 1 x ODU4 <-> 1 x OTU4 | ||
Latency measurement | Supports PM and TCM latency measurement | |
Supports PM and TCM latency measurement for upstream higher-order ODU channels Supports PM and TCM latency measurement for upstream lower-order ODU channels when non-OTN services are received on the client side Supports TCM latency measurement for downstream lower-order ODU channels when OTN services are received on the client side |
||
WDM specification | Supports DWDM specifications | |
Protection scheme | Supports client 1+1 protection | |
Supports intra-board 1+1 protection (implemented with optical protection boards) | ||
When a MPO module is used on the client side, the M402 board does not support client 1+1 protection | ||
When 100GE services are received on the client side, client 1+1 protection supports bidirectional switching rather than unidirectional switching. When OTU4 services are received on the client side, client 1+1 protection supports unidirectional switching | ||
Tunable wavelength function | M402 supports tunable wavelengths of WDM-side optical signals in Super C band (1524 nm to 1573 nm) | |
Optical-layer ASON | Supported | |
PRBS test function | Supports the PRBS function on both the client side and WDM side | |
Alarms and performance events monitoring | Monitors BIP8 bytes (Bursty mode) to help locate line failures | |
Monitors OTN alarms and performance events | ||
Monitors parameters such as the bias current, temperature, and optical power of the laser | ||
Supports the remote monitoring (RMON) of Ethernet services | ||
Supports the monitoring of CD and PMD performance | ||
Service encryption | When the client-side service type is 100GE, the board supports the bidirectional service encryption | |
OTN function | Supports OTUC2 or OTU4 interfaces on the WDM side | |
Uses the frame formats and overhead processing methods defined in ITU-T G.709 | ||
At the ODU4 layer: | ||
Supports PM overhead processing when 100GE services are received on the client side. Non-intrusive monitoring of PM overheads in WDM side is not supported. Supports PM and TCM overhead processing when OTU4 services are received on the client side. This board supports non-intrusive monitoring of PM and TCM overheads. |
||
Supports PM overhead processing at the ODUflex layer | ||
Supports PM overhead processing at the ODUC2 layer | ||
Supports SM overhead processing at the OTU4 layer on the client side | ||
Supports SM overhead processing at the OTUC2 and OTU4 layer on the WDM side | ||
ESC function | Supported | |
Functions and features (multi-function mode) | ||
Basic function | Any port on the tributary side can perform the following signal conversions: | |
OTU4 <-> ODU4 100GE <->ODU4 (Bit transparent mapping/MAC transparent mapping) 100GE <-> ODUflex (MAC transparent mapping) 10GE<->ODU2(Bit transparent mapping(11.1G IMP+BMP)/MAC transparent mapping(10.7G)) 10GE <-> ODUflex (MAC transparent mapping) 40GE<->ODU3(TTT+GMP) |
||
The line port can perform the following signal conversions: | ||
80 x ODU0 / 40 x ODU1 / 10 x ODU2 / 10 x ODU2e / 2 x ODU3 / 1 x ODU4/ 80 x ODUflex <-> 1 x ODU4<-> 1 x OTU4 160 x ODU0/ 80 x ODU1/ 20 x ODU2/20 x ODU2e / 4 x ODU3 / 2 x ODU4/ 160 x ODUflex <-> 2 x ODU4<-> 1 x OTUC2 |
||
Client-side service type | 100GE: Ethernet service at a rate of 103.125 Gbit/s. OTU4: OTN service at a rate of 111.81 Gbit/s 10GE LAN: Ethernet service at a rate of 10.31 Gbit/s 40GE: Ethernet service at a rate of 41.25 Gbit/s |
|
OTN function | Supports OTUC2 or OTU4 interfaces on the WDM side Uses the frame formats and overhead processing methods defined in ITU-T G.709 ODU2 layer: Supports the PM and TCM overhead processing ODU3 layer: Supports PM and TCM overhead processing when 40GE services are received on the client side |
|
At the ODU4 layer: | ||
Supports PM overhead processing when 100GE services are received on the client side Supports PM and TCM overhead processing when OTU4 services are received on the client side. This board supports non-intrusive monitoring of PM and TCM overheads |
||
Supports PM overhead processing at the ODUflex layer | ||
Supports PM and TCM overhead processing at the ODUC2 layer | ||
Supports SM overhead processing at the OTU4 layer on the client side | ||
Supports SM overhead processing at the OTUC2 and OTU4 layer on the WDM side | ||
WDM specification | Supports DWDM specifications | |
Tunable wavelength function | M402 supports tunable wavelengths of WDM-side optical signals in Super C band (1524 nm to 1573 nm) | |
PRBS test function | Supports the PRBS test function in the optical port direction and backplane direction when OTU4 services are received on the tributary side. Supports the PRBS test function in the backplane direction when other services are received on the tributary side. Supports the PRBS test function on the line side |
|
Optical-layer ASON | Supported | |
LPT function | When the client-side service type is 10GE LAN, the board supports the LPT function | |
FEC coding | On the client side: | |
Supports ITU-T G.709-compliant forward error correction (FEC) on the client side when the client-side service type is OTU4 Supports RS_FEC coding when the client-side service type is 100GE |
||
On the WDM side: | ||
CFP-100G(4x25G/28G,Dualrate)-1295nm to 1310nm(LR4)-SMF-10km-SP modules: FEC | ||
Other modules: SDFEC2 and SDFEC | ||
Alarm and performance event monitoring | Monitors BIP8 bytes (Bursty mode) to help locate line failures | |
Monitors OTN alarms and performance events | ||
Monitors parameters such as the bias current, temperature, and optical power of the laser | ||
Supports the remote monitoring (RMON) of Ethernet services | ||
Supports the monitoring of CD and PMD performance | ||
Latency measurement | On the client side: | |
When non-OTN services are received on the client side of the board, the PM section latency measurement is supported in the backplane direction (upstream direction). When OTN services are received on the client side of the board, the TCM section latency measurement is supported in the optical port direction (downstream direction) | ||
On the WDM side: | ||
When higher-order ODU4 cross-connections are created on the board, TCM latency measurement is supported for higher-order ODU4 channels. When lower-order ODUk cross-connections are created on the board, PM/TCM latency measurement is supported for higher-order ODU4 channels, and TCM latency measurement is supported for lower-order ODUk channels | ||
The board supports PM and TCM latency measurement at the ODUCn layer | ||
Physical clock | Supports physical clocks on the line side | |
Tributary side: | ||
100GE (MAC transparent mapping), 10GE LAN(MAC transparent mapping(10.7G)): Supports synchronous Ethernet processing 100GE (Bit transparent mapping ODU4): Supports synchronous Ethernet transparent transmission |
||
Protection scheme | Supports intra-board ODUk SNCP | |
Supports tributary SNCP protection | ||
Supports client 1+1 protection | ||
Supports intra-board 1+1 protection (implemented with optical protection boards) | ||
ESC function | Supported | |
Functions and features (regeneration mode) | ||
Basic function | The M402 board applies to electrical regeneration sites to provide the electrical regeneration function for optical signals | |
Regeneration rate | OTUC2: a rate of 211.45 Gbit/s OTU4: a rate of 111.81 Gbit/s |
|
OTN function | 200G regeneration: | |
Supports OTUC2 interfaces on the WDM side Uses the frame formats and overhead processing methods defined in ITU-T G.709 ODUC2 layer: supports PM overhead processing, and non-intrusive monitoring of PM overheads OTUC2 layer: supports SM overhead processing |
||
100G regeneration: | ||
Supports OTU4 interfaces on the WDM side Uses the frame formats and overhead processing methods defined in ITU-T G.709 ODU4 layer: supports PM and TCM overhead processing, and non-intrusive monitoring of PM and TCM overheads OTU4 layer: supports SM overhead processing |
||
WDM specification | Supports DWDM specifications | |
Tunable wavelength function | M402 supports tunable wavelengths of WDM-side optical signals in Super C band (1524 nm to 1573 nm). | |
ESC function | Supported | |
FEC coding | Colored-light Optical modules: SDFEC2 and SDFEC | |
Alarm and performance event monitoring | Monitors OTN alarms and performance events Monitors parameters such as the bias current, temperature, and optical power of the laser Supports CD and PMD performance monitoring |
|
Optical-layer ASON | Supported | |
Pluggable Optical Module Supported | ||
WDM-Side | CFP- 200G-(1529.17nm to 1567.1nm)(DWDM,Tunable,T15)-SMF 40000ps/nm-Extended C band-Tunable wavelength-ePDM-e16QAM (configurable rate and modulation format, coherent, LHC, T22)-200G CFP 40000ps/nm-Extended C band-Tunable wavelength-ePDM-e16QAM (configurable rate and modulation format, coherent, LHD, high optical power, T23)-200G CFP 40000ps/nm-Extended C band-Tunable wavelength-ePDM-e16QAM (configurable rate and modulation format, coherent, LHD, T23)-200G CFP Extended C band-Tunable wavelength-ePDM-200G e16QAM/100G QPSK/etc.(SDFEC2, LHB, T2U)-CFP Extended C band-Tunable wavelength-ePDM-200G e16QAM/100G QPSK/etc.(Configurable rate and modulation format, Coherent, LHD, A23)-CFP Super C band-Tunable wavelength-ePDM-200G e16QAM/100G QPSK/etc.(SDFEC2, LHD, F23)-CFP Super C band-Tunable wavelength-ePDM-200G 16QAM/100G QPSK/etc.(SDFEC/SDFEC2, Metro, F15)-CFP Super C band-Tunable wavelength-200G e16QAM/100G QPSK/etc.(LHD, High optical power, T23)-CFP-PIN CFP-100G(4x25G/28G,Dualrate)-1295nm to 1310nm(LR4)-SMF-10km-SP |
|
Client-Side | QSFP28-100G(4x25G)-1271 to 1331nm(CLR4)-SMF-2km QSFP28-100G(4x25G/28G,Dualrate)-1295nm to 1310nm(LR4)-SMF-10km QSFP28-103.1G/111.8G(4x25G/4x28G, Dualrate)-1310nm(ER4 Lite)-SMF-30km QSFP28-100G(4x25G)-1310nm(ER4)-SMF-40km QSFP28-100G(4x25G)-850nm(SR4)-MPO-MMF-0.1km QSFP+ -40G(4x10G)-850nm(SR4)-MPO-MMF-0.3km QSFP+ -40G(4x10G)-1310nm(PSM4)-MPO-SMF-10km QSFP+ -40G(4x10G)-1271nm to 1331nm(CWDM,LR4)-SMF-10km |
|
Mechanical Specifications | ||
Dimensions (W x H x D,mm) | 237.1×30.5x 220 | |
Weight (kg) | 1.78 | |
Typical Power Consumption (W) | 97(Line mode)/123(Multi-function mode) | |
Maximum Power Consumption (W) | 106(Line mode)/131(Multi-function mode) |
Bandwidth |
100G |
---|---|
Features | |
Port |
1-10 |
As a global leading professional Huawei network hardware and solution provider, we have delivered Huawei, ZTE, Nokia, CISCO, Fiberhome, etc, equipment to 500+ customer groups in 90+ countries over the past 10 years. Know more
Strict 3-Level Quality Control procedure: 1st-Level inspection; 2nd-Level In-stock test; 3rd-Level 24 hour pre-delivery test to guarantee premium quality. Know more
What we offer to our customers is value rather than price. We make customers enjoy the benefit of our reliable delivery products and generate more value to the greatest extent. Know more
We provide customers personalized and professional tech support by remote diagnosis, fault-location and troubleshooting. "We are here to help you instantly when you need it."
We continuously offer flexible payment methods such as Wire Transfer, Paypal, L/C, Western Union and Alipay, to help customer enjoy a more convenient shopping experience. Know more
We provide official and extensive document resources to guide our customers to targetly solve the problem they may meet. Know more
Our products come with 1 year warranty. Customers can ask for a repair, replacement or refund for a major product failure. Know more
We won't stop to develop rapid and cost effective shipping options, provide the excellent experience for our global customers. Know more
We provide not only network products but also network proposal, mainstream and cost efficient solution to assist customers eliminate the concerns.
Reviews
There are no reviews yet.