![Icon [all products]](https://www.thunder-link.com/tl-content/uploads/2022/05/Icon-all-products-1.svg "Icon [all products]"){kind=icon}
All products
0 in stock Ready to ship
TNG1N210
Huawei OSN 9800 M24/M12/M05 10-port 10G Line Service Processing Board
20
People watching this product now!
Hardware Compatibility
Hardware Compatibility x
Backed up by our experienced pre-sales support team, and volume documentation, to avoid purchasing incompatible hardware.
Hardware Tested
Hardware Tested x
In order to avoid hardware malfunction, each equipment will be strictly tested before delivery and the test report will be packed inside equipment and delivered together. Learn more
Description
TNG1N210 10-port 10G line service processing board
Applied to Huawei OSN 9800 M24, M12 and M05, it supports only relay mode in OSN 9800 M12 and M05 subrack
Supports a maximum of 80 ODU0 signals, 40 ODU1 signals, 80 ODUflex signals, or 10 ODU2/ODU2e signals and cooperates with cross-connect boards to implement service grooming
Supports electrical cross-connections, OTN interfaces, and ESC communication
Supports Optical-layer ASON
Supports physical clock and Loopback only working in line mode
Supports Protection scheme of ODUk SNCP, tributary SNCP protection, and intra-board 1+1 protection (when working with the OLP/DCP/QCP board) only working in line mode
TNG1N210 is a 10-port 10G line service processing board, applied to Huawei OSN 9800 M24/M12/M05. TNG1N210 converts 80 ODU0, 40 ODU1, 10 ODU2, or 80 ODUflex signals into 10 OTU2 signals carried over 10 ITU-T G.694.1 compliant DWDM wavelengths (vice versa), or converts 10 ODU2e signals into 10 OTU2e signals carried over 10 ITU-T G.694.1 compliant DWDM wavelengths (vice versa). Each port on the board supports a mix of ODU0, ODU1, and ODUflex signals.
Tech Specs
| Front Panel | ||||
 |
||||
| Valid Slots | ||||
| OSN 9800 M24 subrack: In 1:1 mode: IU1-IU24 In 1:3 mode: IU1-IU5, IU8-IU17, IU20-IU24 OSN 9800 M12 Subrack:IU1-IU13 9800 M05 Subrack:IU1-IU5 |
||||
| Initial version of different subrack: | ||||
| M24: V100R006C00 M12: V100R019C10SPC600 M05: V100R019C10SPC600 |
||||
| Functions and features (line mode) | ||||
| Basic functions | Each port on the N210 board supports the following service conversions: | |||
| 80 x ODU0/40 x ODU1/80 x ODUflex/10 x ODU2<->10 x OTU2 | ||||
| 10 x ODU2e<->10 x OTU2e | ||||
| Each port on the board supports a mix of ODU0, ODU1, and ODUflex signals | ||||
| Cross-connect capabilities | Supports a maximum of 80 ODU0 signals, 40 ODU1 signals, 80 ODUflex signals, or 10 ODU2/ODU2e signals and cooperates with cross-connect boards to implement service grooming. | |||
| OTN functions | Supports OTU2/OTU2e on the WDM side. | |||
| Supports the OTN frame format and overhead processing defined by ITU-T G.709. | ||||
| OTU2 layer: supports SM overhead processing. | ||||
| ODUk (k=0, 1, 2, flex) layer: supports PM and TCM overhead processing, and non-intrusive monitoring of PM and TCM overheads. | ||||
| WDM specification | Supports DWDM specifications. | |||
| Tunable wavelength function | Supports tunable wavelength optical modules that provide for 80 wavelengths tunable in the C band with 50 GHz channel spacing. | |||
| ESC | Supported | |||
| PRBS test function | Supports the PRBS function on the WDM side. | |||
| FEC coding | Supports ITU-T G.709-compliant forward error correction (FEC) on the WDM side. | |||
| Supports ITU-T G.975.1-compliant AFEC-2 on the WDM side. | ||||
| NOTE: Boards that use different FEC modes cannot interconnect with each other. | ||||
| Alarms and performance events monitoring | Monitors BIP8 bytes (Bursty mode) to help locate line failures. | |||
| Monitors parameters such as the bias current, temperature, and optical power of the laser. | ||||
| Monitors OTN alarms and performance events. | ||||
| Regeneration board | The WDM-side signals of a N206 board can be regenerated by another N206/A212 board. | |||
| Latency measurement | The board supports latency measurement in the WDM-side optical port direction (upstream direction). When higher-order ODUk cross-connections are created on the line board, TCM section latency measurement is supported for higher-order ODUk channels. When lower-order ODUk cross-connections are created on the line board, PM/TCM section latency measurement is supported for higher-order ODUk channels, and TCM section latency measurement is supported for lower-order ODUk channels. | |||
| Functions and features (relay mode) | ||||
| Basic function | Electrically regenerates optical signals at an electrical REG station. | |||
| Supported service rate | OTU2: OTN service at a rate of 10.71 Gbit/s | |||
| OTU2e: OTN service at a rate of 11.1 Gbit/s | ||||
| OTN function | Supports OTU2/OTU2e interface the WDM side. | |||
| Supports the OTN frame format and overhead processing defined by ITU-T G.709. | ||||
| OTU2 layer: supports SM overhead processing. | ||||
| ODU2 layer: supports PM and TCM overhead processing, and non-intrusive monitoring of PM and TCM overheads. | ||||
| WDM specification | Supports DWDM specifications. | |||
| Tunable wavelength function | Supports tunable wavelength optical modules that provide for: | |||
| 40 wavelengths tunable in the C band with 100 GHz channel spacing | ||||
| 80 wavelengths tunable in the C band with 50 GHz channel spacing | ||||
| ESC function | Supported | |||
| PRBS function | Not supported | |||
| FEC coding | Supports ITU-T G.709-compliant forward error correction (FEC) on the WDM side. | |||
| Supports ITU-T G.975.1-compliant AFEC-2 on the WDM side. | ||||
| Note: Boards that use different FEC modes cannot interconnect with each other. | ||||
| Alarms and performance events monitoring | Monitors BIP8 bytes (Bursty mode) to help locate line failures. | |||
| Monitors parameters such as the bias current, temperature, and optical power of the laser. | ||||
| Monitors OTN alarms and performance events. | ||||
| WDM-Side Pluggable Optical Module Supported | ||||
| SFP+ -10G(with CDR)-1310nm-SMF-10km SFP+ -10G(with CDR)-1550nm-SMF-40km SFP+ -10G(with CDR)-1550nm-SMF-80km Specifications SFP+ -10G-(1529.17nm to 1560.61nm)(DWDM,100GHz)-SMF-40km SFP+ -10G-(1529.17nm to 1560.61nm)(DWDM,100GHz)-SMF-80km SFP+ -10G-(1529.17nm to 1560.61nm)(DWDM,50GHz,Tunable)-SMF-40km SFP+ -10G(with CDR)-(1529.55nm to 1560.61nm)(DWDM,100GHz,Tunable)-SMF-40km SFP+ -10G(with CDR)-(1471nm to 1611nm)(CWDM)-SMF-70km-I SFP+ -0.125G to 11.3G-1310nm-SMF-10km SFP+ -8.5G to 11.1G-(1552.93nm to 1560.2nm)(DWDM, 100GHz, Tunable)-SMF-40km SFP+ -8.5G to 11.1G-(1544.92nm to 1552.12nm)(DWDM, 100GHz, Tunable)-SMF-40km SFP+ -8.5G to 11.1G-(1537nm to 1544.13nm)(DWDM, 100GHz, Tunable)-SMF-40km SFP+ -8.5G to 11.1G-(1529.16nm to 1536.22nm)(DWDM, 100GHz, Tunable)-SMF-40km |
||||
| Mechanical Specifications | ||||
| Dimensions (W x H x D,mm) | 237.1×30.5x 220 | |||
| Weight (kg) | 1.5 | |||
| Typical Power Consumption (W) | 64 | |||
| Maximum Power Consumption (W) | 67 | |||
Additional information
| Weight | 3.0 kg |
|---|---|
| Dimensions | 37.5 × 34.0 × 7.5 cm |
| Bandwidth |
10G |
| Features | |
| Port |
1-10 |
Matching Products…
Reviews (0)
Why Thunder-link.com
Reviews
There are no reviews yet.