TNG2A212S01

Huawei OSN 9800 M05/M12/M24 12-port Any Service Processing General Board

0 in stock      Ready to ship

14 People watching this product now!
PN: AAD62B0C Category:
Hardware Compatibility

Hardware Compatibility x

Backed up by our experienced pre-sales support team, and volume documentation, to avoid purchasing incompatible hardware.

Hardware Tested

Hardware Tested x

In order to avoid hardware malfunction, each equipment will be strictly tested before delivery and the test report will be packed inside equipment and delivered together. Learn more

Description

TNG2A212S01 12-port 10G Any Service Processing General Board

Applied to Huawei OSN 9800 M05, M12, M24, it supports electrical cross-connections, OTN interfaces, and ESC communication

TNG2A212S01 board supports Loopback, Alarms and performance events monitoring and Physical clock in Tributary Mode

TNG2A212S01 board supports Protection scheme of client 1+1 protection, ODUk SNCP, tributary SNCP protection in Tributary Mode

TNG2A212S01 board supports PRBS test function, Electrical-layer ASON, Test frame in Tributary Mode

The TNG2A212S01 board is a 12-port 10G Any Service Processing General Board. The A212 board is a general service processing board. Based on the application requirements, an A212 board can be set to common mode or SDH and WDM mode. It supports 2.5G, 8.5G, 10G optical modules etc. and can be configured according to needs.

Tech Specs
Front Panel
TNG2A212S01
Valid Slots
OptiX OSN 9800 M05 Subrack: IU1-IU5
OptiX OSN 9800 M12 Subrack: IU1-IU13
OptiX OSN 9800 M24 subrack: In 1:1 mode: IU1-IU24; In 1:3 mode: IU1-IU5, IU8-IU17, IU20-IU24
Initial Version of Different Subrack
M05: V100R019C10SPC700
M12: V100R019C10SPC700
M24: V100R019C10SPC600
Function and Features
Basic function Supports the following service conversions:
ODU0 non-convergence mode (Any->ODU0)
12 x (125 Mbit/s to 1.25 Gbit/s signals) <-> 12 x ODU0.
ODU1 non-convergence mode (Any->ODU1)
12 x (1.49 Gbit/s to 2.67 Gbit/s signals) <-> 12 x ODU1.
ODU2 non-convergence mode (OTU2/Any->ODU2)
n x 10GE LAN(GFP-F)/10GE WAN/STM-64/OC-192/OTU2/FC800/FICON8G<-> n x ODU2
n x 10GE LAN(BMP)/OTU2e/FC1200/FICON10G<-> n x ODU2e
ODUflex non-convergence mode (Any->ODUflex)
12 x 3G-SDI/3G-SDIRBR/FC400/FICON4G/FC800/FICON8G/10GE LAN(GFP-F)<-> 12 x ODUflex
4 x FC1600 <-> 4 x ODUflex
ODU1_ODU0 mode (OTU1->ODU1->ODU0)
12 x OTU1 <-> 24 x ODU0
ODU1 convergence mode (12*Any->ODU1)
12 x (125 Mbit/s to 2.5 Gbit/s signals) <-> ODU1
NOTE: In ODUflex non-convergence mode, when the M24 subrack works in 1:1 cross-connect mode, the board can access a maximum of 100 Gbit/s services; when the M24 subrack works in 1:3 cross-connect mode, the board can access a maximum of 120 Gbit/s services.
In ODU2 non-convergence mode, when the M24 subrack works in 1:1 cross-connect mode, n is 10; when the M24 subrack works in 1:3 cross-connect mode, n is 12.
Client-side service type SDH/SONET service:
STM-1/OC-3: SDH/SONET service at a rate of 155.52 Mbit/s
STM-4/OC-12: SDH/SONET service at a rate of 622.08 Mbit/s
STM-16/OC-48: SDH/SONET service at a rate of 2488.32 Mbit/s
STM-64/OC-192: SDH/SONET service at a rate of 9.95 Gbit/s
Ethernet service:
FE: Ethernet service at a rate of 125 Mbit/s
GE: Ethernet service at a rate of 1.25 Gbit/s. Supports GE optical signals and GE electrical signals.
10GE LAN: Ethernet service at a rate of 10.31 Gbit/s
10GE WAN: Ethernet service at a rate of 9.95 Gbit/s
OTN service:
OTU1: OTN service at a rate of 2.67 Gbit/s
OTU2: OTN service at a rate of 10.71 Gbit/s
OTU2e: OTN service at a rate of 11.1 Gbit/s
SAN service:
FC100: SAN service at a rate of 1.06 Gbit/s
FC200: SAN service at a rate of 2.12 Gbit/s
FC400: SAN service at a rate of 4.25 Gbit/s
FICON: SAN service at a rate of 1.06 Gbit/s
FICON Express: SAN service at a rate of 2.12 Gbit/s
FICON4G: SAN service at a rate of 4.25 Gbit/s
FC800: SAN service at a rate of 8.5 Gbit/s
FICON8G: SAN service at a rate of 8.5 Gbit/s
FICON10G: SAN service at a rate of 10.51 Gbit/s
FC1200: SAN service at a rate of 10.51 Gbit/s
FC1600: SAN service at a rate of 14.025 Gbit/s
ESCON: SAN service at a rate of 200 Mbit/s
FDDI: SAN service at a rate of 125 Mbit/s
Video service:
SDI: Serial digital interface at a rate of 270 Mbit/s
HD-SDI: Bit-serial digital interface for high-definition television systems at a rate of 1.49 Gbit/s
HD-SDIRBR: Bit-serial digital interface for high-definition television systems at a rate of 1.49/1.001 Gbit/s
3G-SDI: Video service at a rate of 2.97 Gbit/s
3G-SDIRBR: Video service at a rate of 2.97/1.001 Gbit/s
DVB-ASI: Video service at a rate of 270 Mbit/s
Cross-connect capability In the 1:1 mode, supports the cross-connection of up to 100 Gbit/s ODUk signals.
In the 1:3 mode, supports the cross-connection of up to 120 Gbit/s ODUk signals.
OTN function Supports the OTN frame format and overhead processing defined by ITU-T G.709. The mapping process complies with ITU-T G.7041, ITU-T G.709 and G.Sup43.
ODUflex layer: supports PM overhead processing.
ODU0/ODU1/ODU2 layer: supports PM and TCM overhead processing, and non-intrusive monitoring of PM and TCM overheads.
OTU1/OTU2 layer: supports SM overhead processing.
ESC function Supported when the client-side service type is OTU1/OTU2/OTU2e.
LPT function Supported when the client-side service type is FE, GE or 10GE LAN.
FEC coding Supports ITU-T G.709-compliant forward error correction (FEC) on the client side when the client-side service type is OTU1 or OTU2(e).
ALS function Supports the ALS function on the client side when client services are non-OTN services.
Latency measurement When non-OTN services are received on the client side of the board, the PM section latency measurement is supported in the backplane direction (upstream direction). When OTN services are received on the client side of the board, the TCM section latency measurement is supported in the optical port direction (downstream direction).
IEEE 1588v2 Supports the TC, TC+OC, BC, and OC modes.
NOTE: Supports this function when receiving GE (GFP-T) services on the client side.
Supports this function when receiving 10GE LAN services on the client side and Port Mapping is set to MAC Transparent Mapping (10.7G).
The port equipped with an electrical module does not support IEEE 1588v2.
ITU-T G.8275.1 Supports the BC mode.
NOTE: Supports this function when receiving GE (GFP-T) services on the client side.
Supports this function when receiving 10GE LAN services on the client side and Port Mapping is set to MAC Transparent Mapping (10.7G).
The port equipped with an electrical module does not support ITU-T G.8275.1.
ITU-T G.8273.2 Supported
Port MTU The value ranges from 1518 to 9600, in bytes. That is, the maximum size of the supported Jumbo frame is 9600 bytes.
OTN functions and features Description
Basic function Each port on the A212 board supports the following service conversions:
80 x ODU0/40 x ODU1/80 x ODUflex/10 x ODU2<->10 x OTU2
10 x ODU2e<->10 x OTU2e
Each port on the board supports a mix of ODU0, ODU1, and ODUflex signals.
Cross-connect capability Supports the cross-connection of up to 100 Gbit/s ODUk signals.
OTN function Supports OTU2/OTU2e on the WDM side.
Supports the OTN frame format and overhead processing defined by ITU-T G.709.
OTU2 layer: supports SM overhead processing.
ODUk (k=0, 1, 2, flex) layer: supports PM and TCM overhead processing, and non-intrusive monitoring of PM and TCM overheads.
WDM specification Supports ITU-T G.694.1-compliant DWDM specifications.
Tunable wavelength function Supports tunable wavelength optical modules that provide for 80 wavelengths tunable in the C band with 50 GHz channel spacing.
PRBS function Supports the PRBS function on the WDM side.
FEC coding Supports ITU-T G.709-compliant forward error correction (FEC) on the WDM side.
Supports ITU-T G.975.1-compliant AFEC-2 on the WDM side.
Regeneration board The WDM-side signals of a A212 board can be regenerated by another A212/N210 board.
Latency measurement The board supports latency measurement in the WDM-side optical port direction (upstream direction). When higher-order ODUk cross-connections are created on the line board, TCM section latency measurement is supported for higher-order ODUk channels. When lower-order ODUk cross-connections are created on the line board, PM/TCM section latency measurement is supported for higher-order ODUk channels, and TCM section latency measurement is supported for lower-order ODUk channels.
Optical-layer ASON Supported
ESC Supported
SDH functions and features Description
Overhead processing Processes the section overheads of the STM-n (n=1, 4, 16, 64) signals.
Supports the transparent transmission and termination of path overheads.
Supports the setting and query of the J0, J1, and C2 bytes.
Supports ECC communication.
Service processing Supports VC-3, VC-4, and VC-12 services and VC-4-4c, VC-4-16c, and VC-4-64c concatenation services.
Loopback Supports VC-3, VC-4, and VC-12 channel loopbacks.
ALS function Supported
SDH clock synchronization Supported
Outband DCN Supported
Mechanical Specifications
Dimensions (W x H x D, mm) 237.1 x 30.5 x 220.0
Weight (kg) 1.6
Typical Power Consumption (W) 113
Maximum Power Consumption (W) 120
Additional information
Bandwidth

10G

Features

,

Port

12-24

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “TNG2A212S01”

Your email address will not be published. Required fields are marked *

You have to be logged in to be able to add photos to your review.

Why Thunder-link.com

10 Years Experience

As a global leading professional Huawei network hardware and solution provider, we have delivered Huawei, ZTE, Nokia, CISCO, Fiberhome, etc, equipment to 500+ customer groups in 90+ countries over the past 10 years. Know more

Premium Quality Guaranteed

Strict 3-Level Quality Control procedure: 1st-Level inspection; 2nd-Level In-stock test; 3rd-Level 24 hour pre-delivery test to guarantee premium quality. Know more

Value over price

What we offer to our customers is value rather than price. We make customers enjoy the benefit of our reliable delivery products and generate more value to the greatest extent. Know more

Tailored Technical Support

We provide customers personalized and professional tech support by remote diagnosis, fault-location and troubleshooting. "We are here to help you instantly when you need it."

Flexible Payment

We continuously offer flexible payment methods such as Wire Transfer, Paypal, L/C, Western Union and Alipay, to help customer enjoy a more convenient shopping experience. Know more

Official Document Resource

We provide official and extensive document resources to guide our customers to targetly solve the problem they may meet. Know more

1 Year Warranty Guaranteed

Our products come with 1 year warranty. Customers can ask for a repair, replacement or refund for a major product failure. Know more

Fast Global Shipping

We won't stop to develop rapid and cost effective shipping options, provide the excellent experience for our global customers. Know more

One Stop Solution

We provide not only network products but also network proposal, mainstream and cost efficient solution to assist customers eliminate the concerns.