| Front Panel |
 |
| Valid Slots |
OptiX OSN 9800 U16 subrack: IU1-IU14
OptiX OSN 9800 U32 Standard/Enhanced subrack: IU1-IU32
OptiX OSN 9800 U64 Standard/Enhanced subrack: IU1-IU64 |
| Initial version of different subrack |
| V100R007C00SPC300 |
| Functions and features (line mode) |
| OTN functions |
Port in 100G mode:Supports the OTU4 interface on the WDM side.
Supports the OTN frame format and overhead processing defined by ITU-T G.709.
OTU4 layer: supports SM overhead processing.
ODUk (k=0, 1, 2, 2e, 3, 4, flex) layer: supports PM and TCM overhead processing, and non-intrusive monitoring of PM and TCM overheads.
Port in 200G mode:Supports the OTUC2 interface on the WDM side.
OTUC2 layer: supports SM overhead processing.
ODUC2 layer: supports PM and TCM overhead processing.
ODUk (k=0, 1, 2, 2e, 3, 4, flex) layer: supports PM and TCM overhead processing, and non-intrusive monitoring of PM and TCM overheads.
|
| WDM specification |
Supports ITU-T G.694.1-compliant DWDM specifications. |
| Tunable wavelength function |
The board supports tunable wavelengths of WDM-side optical signals in Super C band (1524 nm to 1573 nm). |
| PRBS test function |
Supports the PRBS function on the WDM side. |
| Regeneration board |
Supported |
| Physical clock |
Supported |
| ESC |
Supported |
| Optical-layer ASON |
Supported |
| Electrical-layer ASON |
Supported |
| Protection schemes |
Supports ODUk SNCP.
Supports tributary SNCP protection.
Supports intra-board 1+1 protection (when working with the OLP or DCP board). |
| Latency measurement |
The board supports latency measurement in the WDM-side optical port direction (upstream direction).
When higher-order ODU4 cross-connections are created on the board, TCM latency measurement is supported for higher-order ODU4 channels. When lower-order ODUk cross-connections are created on the board, PM/TCM latency measurement is supported for higher-order ODU4 channels, and TCM latency measurement is supported for lower-order ODUk channels.
The board supports PM and TCM latency measurement at the ODUCn layer. |
| Loopback |
WDM-Side Loopback supported.
Channel loopback:Port in 100G mode: ODUk (k = 0, 1, 2, 2e, 3, or flex) channel loopbacks
Port in 200G mode or 400G mode: ODUk (k=0, 1, 2, 2e, 3, 4, flex) channel loopbacks. |
| Alarm and performance event monitoring |
Monitors BIP8 bytes (Bursty mode) to help locate line failures. |
| Monitors parameters such as the bias current, temperature, and optical power of the laser. |
| Monitors OTN alarms and performance events. |
| Functions and features (relay mode) |
| OTN functions |
Port in 100G mode:Supports the OTU4 interface on the WDM side.
Supports the OTN frame format and overhead processing defined by ITU-T G.709.
OTU4 layer: supports SM overhead processing.
ODU4 layer: supports PM and TCM overhead processing, and non-intrusive monitoring of PM and TCM overheads.
Port in 200G mode:Supports the OTUC2 interface on the WDM side.
OTUC2 layer: supports SM overhead processing.
ODUC2 layer: supports PM and TCM overhead processing, and non-intrusive monitoring of PM and TCM overheads.
|
| Basic function |
The N501/N502 board applies to electrical regeneration sites to provide the electrical regeneration function for optical signals. |
| Supported service rate |
OTU4: OTN service at a rate of 111.81 Gbit/s
OTN：service at a rate of 224.61 Gbit/s
OTUC4: OTN service at a rate of 449.22 Gbit/s |
| WDM specification |
Supports ITU-T G.694.1-compliant DWDM specifications. |
| Tunable wavelength function |
The board supports tunable wavelengths of WDM-side optical signals in Super C band (1524 nm to 1573 nm). |
| ESC function |
Supported |
| ALS function |
Only the TNS2N502 board supports the ALS function. |
| Optical-layer ASON |
Supported |
| Alarms and performance events monitoring |
Monitors BIP8 bytes (Bursty mode) to help locate line failures. |
| Monitors parameters such as the bias current, temperature, and optical power of the laser. |
| Monitors OTN alarms and performance events. |
| WDM-Side Pluggable Optical Module Supported |
CFP- 200G-(1529.17nm to 1567.1nm)(DWDM,Tunable,T15)-SMF
40000ps/nm-Extended C band-Tunable wavelength-ePDM-e16QAM (configurable rate and modulation format, coherent, LHC, T22)-200G CFP
40000ps/nm-Extended C band-Tunable wavelength-ePDM-e16QAM (configurable rate and modulation format, coherent, LHD, high optical power, T23)-200G CFP
40000ps/nm-Extended C band-Tunable wavelength-ePDM-e16QAM (configurable rate and modulation format, coherent, LHD, T23)-200G CFP Specifications
Extended C band-Tunable wavelength-ePDM-200G e16QAM/100G QPSK/etc.(SDFEC2, LHB, T2U)-CFP
Super C band-Tunable wavelength-ePDM-200G e16QAM/100G QPSK/etc.(SDFEC2, LHD, F23)-CFP
Super C band-Tunable wavelength-ePDM-200G 16QAM/100G QPSK/etc.(SDFEC/SDFEC2, Metro, F15)-CFP
Extended C band-Tunable wavelength-ePDM-200G e16QAM/100G QPSK/etc.(Configurable rate and modulation format, Coherent, LHD, A23)-CFP
Super C band-Tunable wavelength-200G e16QAM/100G QPSK/etc.(LHD, High optical power, T23)-CFP-PIN |
| Mechanical Specifications |
| Dimensions(W x H x D) |
477.3mm x 30.5mm x 220.0mm |
| Weight (kg) |
2.8 |
| Typical Power Consumption (W) |
151 |
| Maximum Power Consumption(W) |
160 |
![Icon [all products]](https://www.thunder-link.com/tl-content/uploads/2022/05/Icon-all-products-1.svg "Icon [all products]"){kind=icon}
All products
Mariano
Spain
Reasonable price, so we placed order in a short time.
Mager
Tanzania
I have bought 2 pcs, its ok at present.
Baxter
Lebanon
I have bought it many times, and I hope you will continue to provide me with quality products
Bhatt
Kenya
My company trusts Thunder-link, we almost purchase from Thunder-link every time.
Muchemi
Kenya
We need TNS2N502C01 for OSN9800 U32, very new card, box no damage.