| Front Panel |
 |
| Valid Slots |
| OptiX OSN 9800 U32 Standard/Enhanced subrack:IU1-IU32
OptiX OSN 9800 U64 Standard/Enhanced subrack:IU1-IU64
OptiX OSN 9800 U16 subrack:IU1-IU14
OptiX OSN 9800 M24 subrack:(IU1, IU13), (IU2, IU14), …… , (IU11, IU23), (IU12, IU24)
In 1:3 cross-connect mode, service boards cannot be installed in slots (IU6, IU18) and (IU7, IU19). |
| Initial version of different subrack: |
| V100R019C10SPC300 |
| Functions and features (line mode) |
| Basic functions |
Supports the following service conversions: |
| 80 x ODU0 / 40 x ODU1 / 10 x ODU2 / 10 x ODU2e / 2 x ODU3 / 1 x ODU4/ 80 x ODUflex <-> 1 x ODU4<-> 1 x OTU4 |
| 160 x ODU0/ 80 x ODU1/ 20 x ODU2/ 20 x ODU2e/ 4 x ODU3/ 2 x ODU4/ 160 x ODUflex <->2 x ODU4<-> 1 x OTUC2 |
| 320xODU0/160xODU1/40xODU2/40xODU2e/8xODU3/4xODU4/320xODUflex <->4 x ODU4<->1 x ODUC4<->1xOTUC4 |
| Latency measurement |
The board supports latency measurement in the WDM-side optical port direction (upstream direction) |
| When higher-order ODU4 cross-connections are created on the board, TCM latency measurement is supported for higher-order ODU4 channels. When lower-order ODUk cross-connections are created on the board, PM/TCM latency measurement is supported for higher-order ODU4 channels, and TCM latency measurement is supported for lower-order ODUk channels |
| The board supports PM and TCM latency measurement at the ODUCn layer |
| WDM specification |
Supports ITU-T G.694.1-compliant DWDM specifications |
| Typical channel spacing |
200G ePDM-e16QAM: 50GHz Flex/ 62.5GHz Flex/75GHz Flex |
| Others modulation format: 50GHz Fix |
| Optical-layer ASON |
Supported |
| PRBS test function |
Supports the PRBS function on the WDM side |
| Protection schemes |
Supports ODUk SNCP |
| Supports tributary SNCP protection |
| Supports intra-board 1+1 protection (when working with the OLP or DCP board) |
| Alarms and performance events monitoring |
Monitors BIP8 bytes (Bursty mode) to help locate line failures |
| Monitors parameters such as the bias current, temperature, and optical power of the laser |
| Monitors OTN alarms and performance events |
| ESC |
Supported |
| Functions and features (relay mode) |
| Basic function |
The N502 board applies to electrical regeneration sites to provide the electrical regeneration function for optical signals |
| Supported service rate |
OTU4: OTN service at a rate of 111.81 Gbit/s |
| OTUC2: OTN service at a rate of 224.61 Gbit/s |
| WDM specification |
Supports ITU-T G.694.1-compliant DWDM specifications |
| Tunable wavelength function |
The board supports tunable wavelengths of WDM-side optical signals in Super C band (1524 nm to 1573 nm) |
| ESC function |
Supported |
| ALS function |
Supported |
| PRBS function |
Not supported |
| Alarm and performance event monitoring |
Monitors BIP8 bytes (Bursty mode) to help locate line failures |
| Monitors parameters such as the bias current, temperature, and optical power of the laser |
| Monitors OTN alarms and performance events. |
| WDM-Side Pluggable Optical Module Supported |
CFP- 200G-(1529.17nm to 1567.1nm)
40000ps/nm-Extended C band-Tunable wavelength-ePDM-e16QAM
40000ps/nm-Extended C band-Tunable wavelength-ePDM-e16QAM
40000ps/nm-Extended C band-Tunable wavelength-ePDM-e16QAM
Super C band-Tunable wavelength-ePDM-200G e16QAM/100G QPSK/etc.(SDFEC2, LHD, F23)-CFP
Super C band-Tunable wavelength-ePDM-200G 16QAM/100G QPSK/etc.(SDFEC/SDFEC2, Metro, F15)-CFP
Extended C band-Tunable wavelength-ePDM-200G e16QAM/100G QPSK/etc
Super C band-Tunable wavelength-200G e16QAM/100G QPSK/etc.(LHD, High optical power, T23)-CFP-PIN |
| Mechanical Specifications |
| Dimensions (W x H x D,mm) |
477.3×30.5x 220 |
| Weight (kg) |
2.8 |
| Typical Power Consumption (W) |
181 |
| Maximum Power Consumption (W) |
193 |
![Icon [all products]](https://www.thunder-link.com/tl-content/uploads/2022/05/Icon-all-products-1.svg "Icon [all products]"){kind=icon}
All products
Reviews
There are no reviews yet.
There are no reviews yet.