| Front Panel |
 |
| Valid Slots |
OptiX OSN 9800 U64 Standard subrack: IU1-IU64
OptiX OSN 9800 U32 Standard subrack: IU1-IU32
OptiX OSN 9800 U16 subrack: IU1-IU14 |
| Initial Version: V100R001C20SPC300 |
| Line mode |
| Basic function |
Supports the following service conversions:
160xODU0/80xODU1/20xODU2/20xODU2e/4xODU3/2xODU4/160xODUflex<->1xOTUC2
The board supports a mix of ODU0, ODU1, ODU2, ODU2e, ODU3, ODU4 and ODUflex signals. |
| Cross-connect capabilities |
Supports backplane cross-connections of 160 ODU0, 80 ODU1, 20 ODU2, 20 ODU2e, 4 ODU3, 2 ODU4, or 160 ODUflex signals from/to the cross-connect board. |
| License |
Only the TNU2N501 board supports capacity expansion license: Per 100G Capacity Expansion Fee. The Per 100G Capacity Expansion Fee allows the TNU2N501 board to support the beyond 100G capacity function. |
| OTN functions |
Supports OTUC2 on the WDM side.
OTUC2 layer: supports SM overhead processing.
ODUC2 layer: supports PM overhead processing.
ODUk (k=0, 1, 2, 2e, 3, 4, flex) layer: supports PM and TCM overhead processing, and non-intrusive monitoring of PM and TCM overheads. |
| WDM specification |
Supports DWDM specifications. |
| Tunable wavelength function |
Supports 80-wavelength-tunable optical modules. |
| ESC function |
Supported |
| PRBS function |
Supports the PRBS function on the WDM side. |
| FEC coding |
Supports SDFEC on the WDM side.
NOTE:
Boards that use different FEC modes cannot interconnect with each other. |
| Alarms and performance events monitoring |
Monitors BIP8 bytes (Bursty mode) to help locate line failures.
Monitors parameters such as the bias current, temperature, and optical power of the laser.
Monitors OTN alarms and performance events. |
| Regeneration board |
WDM-side signals from one N501 board can be regenerated by another N501 board. |
| Test frame, IEEE 1588v2, Physical clock not supported |
| Typical channel spacing |
200G 16QAM: 50 GHz Fix/37.5 GHz Superchannel |
| Relay mode |
| Basic function |
Electrically regenerates optical signals at an electrical REG station. |
| Supported service rate |
OTUC2: OTN service at a rate of 224.61 Gbit/s |
| OTN function |
Supports the OTN frame format and overhead processing defined by ITU-T G.709.
OTUC2 layer: supports SM overhead processing.
ODUC2 layer: supports PM overhead processing, and non-intrusive monitoring of PM overheads. |
| WDM specification |
Supports DWDM specifications. |
| Tunable wavelength function |
Supports tunable wavelength optical modules. |
| ESC function |
Supported |
| PRBS function |
Not supported |
| FEC coding |
Supports SDFEC on the WDM side.
NOTE:
Boards that use different FEC modes cannot interconnect with each other. |
| Alarms and performance events monitoring |
Monitors BIP8 bytes (Bursty mode) to help locate line failures.
Monitors parameters such as the bias current, temperature, and optical power of the laser.
Monitors OTN alarms and performance events. |
| Test frame, IEEE 1588v2, Physical clock, Optical-layer ASON, Electrical-layer ASON, Protection scheme, Loopback not supported |
| 40000 ps/nm-C Band-Tunable Wavelength-200G-16QAM (SDFEC)-PIN |
| Optical Module Type |
200G ePDM-16QAM (SDFEC) |
| Line code format |
PIN |
| Transmitter parameter specifications at point S |
| center frequency (THz) |
192.1 to 196.05 (Fixed grid) |
| center frequency (THz) |
192.09375 to 196.05625 (Flex grid) |
| center frequency deviation (GHz) |
±2.5 (Fixed grid) |
| center frequency deviation(GHz) |
±1.5 (Flex grid) |
| minimum mean launched power (dBm) |
-5 |
| maximum mean launched power (dBm) |
0 |
| maximum -10 db spectral width (nm) |
0.4 |
| maximum -3 db spectral width (nm) |
0.3 |
| dispersion tolerance (back-to-back) (ps/nm) |
40000 |
| Receiver parameter specifications at point R |
| receiver type |
PIN |
| operating wavelength range (nm) |
1529 to 1561 |
| receiver sensitivity (dBm) |
-16 |
| minimum receiver overload(dBm) |
0 |
| maximum reflectance (dB) |
-27 |
| Mechanical Specifications |
| Dimensions (H x W x D,mm) |
477.3 x 30.5 x 220.0 |
| Weight (kg) |
4 |
| Typical Power Consumption (W) |
250 |
| Maximum Power Consumption (W) |
265 |
Reviews
There are no reviews yet.
There are no reviews yet.