Huawei OSN 9800 U64/U32/U16 2-port 100G Line Service Processing Board
in stock inquire lead time
Hardware Compatibility x
Backed up by our experienced pre-sales support team, and volume documentation, to avoid purchasing incompatible hardware.
Hardware Tested x
In order to avoid hardware malfunction, each equipment will be strictly tested before delivery and the test report will be packed inside equipment and delivered together. Learn more
TNU3N402T58, 2-port 100 Gbit/s line service processing board
With 120000 ps/nm-C Band-Tunable Wavelength-ePDM-QPSK(SDFEC2)-PIN fixed optical module
Apply to Huawei OptiX OSN 9800 U16/U32/U64
Functional versions of N402 are TNU1, TNU2, TNU3, TNU5, TNV1, and TNV2
TNU3N402 supports variants of T51 T52 T53 T61 T65 T58 T68 and T50, with different WDM optical modules equipped
Supports electrical cross-connections, OTN interfaces, and ESC communication
Supports Optical-layer ASON in line and replay mode, but only support Electrical-layer ASON in line mode
Support Protection scheme and Loopback only working in line mode
TNU3N402T58 is a 2-port 100G line service processing board, applied to Huawei OSN 9800 U64, OSN 9800 U32 and OSN 9800 U16. It converts 160 ODU0, 80 ODU1, 20 ODU2, 20 ODU2e, 4 ODU3, 2 ODU4, or 160 ODUflex signals into 2 OTU4 signals carried over 2 ITU-T G.694.1 compliant DWDM wavelength, and vice versa. Each port on the board supports a mix of ODU0, ODU1, ODU2/ODU2e, ODU3, and ODUflex signals. The N402 board uses coherent detection technology and is targeted for coherent communications.
Front Panel | ||||||
Valid Slots | ||||||
OSN 9800 U64 Standard subrack: IU1-IU64 OSN 9800 U32 Standard subrack: IU1-IU32 OSN 9800 U16 subrack: IU1-IU14 |
||||||
Initial Version: V100R002C10&V100R002C00SPC810 | ||||||
Functions and features (line mode) | ||||||
Basic function | Supports the following service conversions: 160xODU0/80xODU1/20xODU2/20xODU2e/4xODU3/2xODU4/160xODUflex<->2xOTU4 Each port on the board supports a mix of ODU0, ODU1, ODU3, ODU2, ODU2e, and ODUflex signals. |
|||||
Cross-connect capabilities | Supports backplane cross-connections of 160 ODU0, 80 ODU1, 20 ODU2, 20 ODU2e, 4 ODU3, 2 ODU4, or 160 ODUflex signals from/to the cross-connect board. | |||||
OTN functions | Supports OTU4 on the WDM side. Supports the OTN frame format and overhead processing defined by ITU-T G.709. OTU4 layer: supports SM overhead processing. ODUk (k=0, 1, 2, 2e, 3, 4, flex) layer: supports PM and TCM overhead processing, and non-intrusive monitoring of PM and TCM overheads. |
|||||
WDM specification | Supports ITU-T G.694.1-compliant DWDM specifications. | |||||
Tunable wavelength function | Supports tunable wavelength optical modules that provide for 80 wavelengths tunable in the C band with 50 GHz channel spacing. The TNU5N402 board supports tunable wavelengths of WDM-side optical signals in Super C band (1524 nm to 1573 nm). |
|||||
ESC function | Supported | |||||
PRBS function | Supports the PRBS function on the WDM side. | |||||
FEC coding | TNU1N402: Supports SDFEC on the WDM side. TNU2N402: Supports SDFEC2 on the WDM side. TNU3N402: Supports SDFEC2 on the WDM side. TNU5N402: When CFP-100G(4x25G/28G,Dualrate)-1295nm to 1310nm(LR4)-SMF-10km-SP modules are used: FEC When other modules are used: SDFEC2, HFEC PLUS TNV1N402: Supports FEC on the WDM side. TNV2N402: Supports HFEC on the WDM side. Note: Boards that use different FEC modes cannot interconnect with each other. |
|||||
Alarms and performance events monitoring | Monitors BIP8 bytes (Bursty mode) to help locate line failures. Monitors parameters such as the bias current, temperature, and optical power of the laser. Monitors OTN alarms and performance events. |
|||||
Regeneration board | The WDM-side signals of an N402 board can be regenerated using the N401, N402, LTX, or NS4 board of the same type. For example, The type of the TNU1N402T11 board is T11, and the WDM-side signals of the TNU1N402T11 board can be regenerated using the N401, N402, LTX, or NS4 board of the T11 type, such as TNU1N401T11, TNU1N402T11, TN54NS4T11, TN56NS4T11, TN11LTXT11, and TN12LTXT11. |
|||||
Functions and features (relay mode) | ||||||
Basic function | Electrically regenerates optical signals at an electrical REG station. | |||||
Supported service rate | OTU4: OTN service at a rate of 111.81 Gbit/s | |||||
OTN functions | Supports OTU4 on the WDM side. Supports the OTN frame format and overhead processing defined by ITU-T G.709. OTU4 layer: supports SM overhead processing. ODU4 layer: supports PM and TCM overhead processing, and non-intrusive monitoring of PM and TCM overheads. |
|||||
WDM specification | Supports ITU-T G.694.1-compliant DWDM specifications. | |||||
Tunable wavelength function | Supports tunable wavelength optical modules that provide for 80 wavelengths tunable in the C band with 50 GHz channel spacing. | |||||
The TNU5N402 board supports tunable wavelengths of WDM-side optical signals in Super C band (1524 nm to 1573 nm). | ||||||
ESC function | Supported | |||||
PRBS function | Not supported | |||||
FEC coding | TNU1N402: SDFEC TNU2N402: SDFEC2 TNU3N402: SDFEC2 TNU5N402: SDFEC2, HFEC PLUS TNV2N402: HFEC NOTE: Boards that use different FEC modes cannot interconnect with each other. |
|||||
Alarms and performance events monitoring | Monitors BIP8 bytes (Bursty mode) to help locate line failures. Monitors parameters such as the bias current, temperature, and optical power of the laser. Monitors OTN alarms and performance events. |
|||||
120000 ps/nm-C Band-Tunable Wavelength-ePDM-QPSK(SDFEC2)-PIN | ||||||
line code format | ePDM-QPSK(SDFEC2) | |||||
Transmitter parameter specifications at point S | ||||||
center frequency (THz) | 192.1 to 196.05 | |||||
center frequency deviation (GHz) | ±2.5 | |||||
minimum mean launched power (dBm) | -5 | |||||
maximum mean launched power (dBm) | 0 | |||||
maximum -3 db spectral width (nm) | 0.3 | |||||
dispersion tolerance (back-to-back) (ps/nm) | 120000 | |||||
Receiver parameter specifications at point R | ||||||
receiver type | PIN | |||||
operating wavelength range (nm) | 1529 to 1561 | |||||
receiver sensitivity (dBm) | -16 | |||||
minimum receiver overload (dBm) | 0 | |||||
maximum reflectance (dB) | -27 | |||||
Mechanical Specifications | ||||||
Dimensions (H x W x D,mm) | 477.3 x 30.5 x 220.0 | |||||
Weight (kg) | 4.5 | |||||
Typical Power Consumption (W) | 183 | |||||
Maximum Power Consumption (W) | 194 |
Bandwidth |
100G |
---|---|
Features | |
Port |
1-10 |
Q: What are the available functional versions of N402?
A: They are TNU1, TNU2, TNU3, TNU5, TNV1, and TNV2.
Q: What are the differences between these versions?
A: Function:
Board | FEC Encoding | Gray Light | WDM-Side Pluggable Optical Module | Regeneration |
TNU1N402 | SDFEC | N | N | Y |
TNU2N402 TNU3N402 |
SDFEC2 | N | N | Y |
TNU5N402 | SDFEC2,HFEC PLUS | N | Y | Y |
FEC | Y | Y | N | |
TNV1N402 | FEC | Y | Y | N |
TNV2N402 | HFEC | N | N | Y |
Application:
TNU2N402T65/TNU3N402T65 board applies only to the MAN. This limitation is not applicable to other boards.
Q: What is the substitution relationship of these boards?
A:
Original Board | Substitute Board |
TNV1N402C01 | TNU5N402/TNU1G402 |
TNU2N402 | TNU3N402 |
TNU5N402 | TNU6N402 |
TNU5N402 | TNS7N402 |
Other boards | None |
Q: What are the available variants of TNU3N402?
A:
Board | WDM-Side Fixed Optical Module | FEC encoding |
TNU3N402T51 | 150000 ps/nm-C Band-Tunable Wavelength-ePDM-QPSK(SDFEC2)-PIN | SDFEC2 |
TNU3N402T52 | 55000 ps/nm-C Band-Tunable Wavelength-ePDM-QPSK(SDFEC2)-PIN | |
TNU3N402T53 | 40000 ps/nm-C Band-Tunable Wavelength-ePDM-QPSK(SDFEC2)-PIN | |
TNU3N402T61 | 150000 ps/nm-C Band-Tunable Wavelength-ePDM-QPSK(SDFEC2,wDCM)-PIN | |
TNU3N402T65 | 12000 ps/nm-C Band-Tunable Wavelength-ePDM-QPSK(SDFEC2,wDCM-Metro)-PIN | |
TNU3N402T58 | 120000 ps/nm-C Band-Tunable Wavelength-ePDM-QPSK(SDFEC2)-PIN | |
TNU3N402T68 | 120000 ps/nm-C Band-Tunable Wavelength-ePDM-QPSK(SDFEC2,wDCM)-PIN | |
TNU3N402T50 | 150000 ps/nm-C Band-Tunable Wavelength-ePDM-QPSK(SDFEC2)-PIN |
As a global leading professional Huawei network hardware and solution provider, we have delivered Huawei, ZTE, Nokia, CISCO, Fiberhome, etc, equipment to 500+ customer groups in 90+ countries over the past 10 years. Know more
Strict 3-Level Quality Control procedure: 1st-Level inspection; 2nd-Level In-stock test; 3rd-Level 24-hour pre-delivery test to guarantee premium quality. Know more
What we offer to our customers is value rather than price. We enable customers to enjoy the benefit of our reliable delivery products and generate more value to the greatest extent. Know more
We provide customers with personalized and professional tech support by remote diagnosis, fault-location and troubleshooting. "We are here to help you instantly when you need it."
We continuously offer flexible payment methods such as Wire Transfer, Paypal, L/C, Western Union and Alipay, to help customer enjoy a more convenient shopping experience. Know more
We provide extensive document resources to guide our customers to targetly solve the problem they may meet. Know more
Our products come with 1-year warranty. Customers can ask for a repair, replacement or refund for a major product failure. Know more
We won't stop to develop rapid and cost effective shipping options, providing the excellent experience to our global customers. Know more
We offer not only network products but also network proposal, mainstream and cost-effective solution to assist customers eliminate the concerns.
Reviews
There are no reviews yet.