My Cart

Mini Cart

TNU3N602T33
TNU3N602T33

TNU3N602T33

PN: AA3C1A25
RFQ

Huawei OSN 9800 M24/U16/U32/U64 2-port 200G/400G high performance Programmable Line Board

- +
Hardware Tested

Hardware Tested x

In order to avoid hardware malfunction, each equipment will be strictly tested before delivery and the test report will be packed inside equipment and delivered together. Learn More

Hardware Compatibility

Hardware Compatibility x

Backed up by our experienced pre-sales support team, and volume documentation, to avoid purchasing incompatible hardware.

Overview

TNU3N602T33 2-port 200G/400G high performance Programmable Line Service Processing Board

Applied to Huawei OSN 9800 M24, U16 U32 and U64, it supports relay mode and line mode

Supports Optical-layer ASON

Supports physical clock and Loopback only working in line mode

Supports Protection scheme of ODUk SNCP, tributary SNCP protection, and intra-board 1+1 protection (when working with the OLP/DCP/QCP board) only working in line mode

 

TNU3N602T33 is 2-ports 200G/400G high performance Programmable Line Service Processing Board. TNU3N602T33 board converts ODU0, ODU1, ODU2/ODU2e, ODU3, ODU4, and ODUflex signals carried over ITU-T G.694.1 compliant DWDM wavelengths.

 

Tech Specs
Front Panel
 
Valid Slots
OptiX OSN 9800 U32 Standard/Enhanced subrack:IU1-IU32
OptiX OSN 9800 U64 Standard/Enhanced subrack:IU1-IU64
Initial version of different subrack:
T15/Gray light: V100R006C10
Other: V100R007C00SPC300
Function and Features (line mode)
Basic function Supports hybrid transmission of ODU0, ODU1, ODU2, ODU2e, ODU3, ODU4, and ODUflex signals in both modes.
Cross-connect capabilities Implements service grooming when working with cross-connect boards.
640 x ODU0/320 x ODU1/80 x ODU2/80 x ODU2e/16 x ODU3/8 x ODU4/640 x ODUflex
OTN functions Supports OTUC2, and OTUC4 interfaces on the WDM side
Uses the frame formats and overhead processing methods defined in ITU-T G.709
ODUk (k = 0, 1, 2, 2e, 3, 4, or flex) layer: Supports PM and TCM overhead processing, and non-intrusive monitoring of PM and TCM overheads
ODUC2, or ODUC4 layer: Supports the PM and TCM functions
OTUC2, or OTUC4 layer: Supports SM overhead processing.
Latency measurement The board supports latency measurement in the WDM-side optical port direction (upstream direction).
When higher-order ODU4 cross-connections are created on the board, TCM latency measurement is supported for higher-order ODU4 channels. When lower-order ODUk cross-connections are created on the board, PM/TCM latency measurement is supported for higher-order ODU4 channels, and TCM latency measurement is supported for lower-order ODUk channels.
The board supports PM and TCM latency measurement at the ODUCn layer.
WDM specifications Supports DWDM specifications.
Tunable wavelength function The board supports tunable wavelengths of WDM-side optical signals in Super C band (1524 nm to 1573 nm).
ESC function Supported.
PRBS function Supported on the WDM side.
Alarm and performance event monitoring Monitors BIP8 bytes (Bursty mode) to help locate line failures
Monitors parameters such as the bias current, temperature, and optical power of the laser.
Monitors OTN alarms and performance events.
Typical channel spacing 200G QPSK wDCM: 100GHz
200G QPSK, 400G 16QAM: 75GHz
Physical clock Supported
Electrical-layer ASON Supported
Optical-layer ASON Supported
Function and Features (relay mode)
Basic function Electrically regenerates optical signals at an electrical REG station. Board-level regeneration is supported.
Supported service rate OTUC2: OTN service at a rate of 224.61 Gbit/s
OTUC4: OTN service at a rate of 449.22 Gbit/s
OTN functions Supports OTUC2, and OTUC4 interfaces on the WDM side.
Uses the frame formats and overhead processing methods defined in ITU-T G.709.
ODUk (k = 0, 1, 2, 2e, 3, 4, or flex) layer: Supports PM and TCM overhead processing, and non-intrusive monitoring of PM and TCM overheads.
ODUC2, or ODUC4 layer: Supports the PM and TCM functions.
OTUC2, or OTUC4 layer: Supports SM overhead processing.
WDM specifications Supports DWDM specifications.
Tunable wavelength function The board supports tunable wavelengths of WDM-side optical signals in Super C band (1524 nm to 1573 nm).
ESC function Supported
ALS function Supported
FEC coding SDFEC2
Optical-layer ASON Supported
Alarm and performance event monitoring Monitors BIP8 bytes (Bursty mode) to help locate line failures
Monitors parameters such as the bias current, temperature, and optical power of the laser.
Monitors OTN alarms and performance events.
200G/400G Micro T32(SLHC,[email protected] QPSK/400G 16QAM/etc., Coherent, Tunable, Super C band, Flex grid)
Item Value
Form factor Unpluggable Module
Module type DWDM
Connector type LC
Optical fiber type SMF
Optical line code 400G 16QAM/200G QPSK/200G QPSK wDCM
FEC mode 400G/200G/200G
Transmission rate Supported
Transmitter optical characteristics
Center frequency 190.7 to 196.6375(THz)
Center frequency deviation ±1.5(GHz)
Laser center wavelength change step 0.1(GHz)
Channel spacing 75/75/100(GHz)
Number of tunable channels 80/80/60
Range of the adjustable optical power -9 to 6(dbm)
Default optical power 0.5(dbm)
Optical power adjustment precision ±0.5(db)
Max -10dB spectral width 87.5(GHz)
Max -3dB spectral width 75(GHz)
TX OSNR (In band) 35(db)
Receiver Optical Characteristics
Receiver type PIN
Operating wavelength range 1523 to 1574(nm)
Receiver sensitivity -14/-19(dbm)
Overload power 0(dbm)
Mechanical Specifications
Dimensions(W x H x D) 477.3(W) x 30.5(H) x 220.0(D)
Weight (kg) 5.01
Typical Power Consumption (W) 271
Maximum Power Consumption(W) 288

 

 

Reviews
Write Your Own Review
You're reviewing:TNU3N602T33
Your Rating:
Why Thunder-link.com
  •  

  •  

  •  

  •  

  •  

  •  

  •  

  •  

  •