Huawei OSN 9800 M24/M12/M05 1-port 100G/200G programmable line board
in stock Ready to ship
Hardware Compatibility x
Backed up by our experienced pre-sales support team, and volume documentation, to avoid purchasing incompatible hardware.
Hardware Tested x
In order to avoid hardware malfunction, each equipment will be strictly tested before delivery and the test report will be packed inside equipment and delivered together. Learn more
TNU5N501P 1-port 100G/200G programmable line service processing board
Applied to Huawei OSN 9800 M24, U32, U64, it supports line or relay mode
TNU5N501P board supports a mixture of ODU0, ODU1, ODU2, ODU2e, ODU3, and ODUflex signals in 100G mode, supports a mixture of ODU0, ODU1, ODU2, ODU2e, ODU3, ODU4, and ODUflex signals in 200G mode
TNU5N501P supports ESC, Optical-layer ASON function, supports physical clock and Loopback only working in line mode
TNU5N501P is a 1-port 100G/200G programmable line service processing board. The N501P board can work in line mode or in relay mode. The WDM-side rate can be flexibly adjusted to 100G or 200G. That is, the board port can be set to 100G Mode or 200G Mode. The default rate is 200 Gbit/s. The board supports the setting of 100G Mode or 200G Mode when working in line or relay mode. The N501P board uses coherent detection technologies and is designated for coherent systems.
Front Panel | ||||
![]() |
||||
Valid Slots | ||||
OptiX OSN 9800 U32 Standard/Enhanced subrack:IU1-IU32 OptiX OSN 9800 U64 Standard/Enhanced subrack:IU1-IU64 |
||||
Initial version of different subrack | ||||
T15/Gray light: V100R006C10 Other: V100R007C00SPC300 |
||||
Function and Features (line mode) | ||||
Basic function | The N501P board has only one port, and the working mode of the port can be set. | |||
Cross-connect capabilities | Supports service grooming with cross-connect boards. | |||
Port in 100G mode: 80 x ODU0/40 x ODU1/10 x ODU2/10 x ODU2e/2 x ODU3/1 x ODU4/80 x ODUflex | ||||
Port in 200G mode: 160 x ODU0/80 x ODU1/20 x ODU2/20 x ODU2e/4 x ODU3/2 x ODU4/160 x ODUflex | ||||
OTN function | Port in 100G mode | Supports the OTU4 interface on the WDM side. | ||
Supports the OTN frame format and overhead processing defined by ITU-T G.709. | ||||
OTU4 layer: supports SM overhead processing. | ||||
ODUk (k=0, 1, 2, 2e, 3, 4, flex) layer: supports PM and TCM overhead processing, and non-intrusive monitoring of PM and TCM overheads. | ||||
Port in 200G mode | Supports the OTUC2 interface on the WDM side. | |||
OTUC2 layer: supports SM overhead processing. | ||||
ODUC2 layer: supports PM and TCM overhead processing. | ||||
ODUk (k=0, 1, 2, 2e, 3, 4, flex) layer: supports PM and TCM overhead processing, and non-intrusive monitoring of PM and TCM overheads. | ||||
WDM specifications | Supports ITU-T G.694.1-compliant DWDM specifications. | |||
Tunable wavelength function | TNU5N501P support tunable wavelength optical modules that provide for 96 wavelengths tunable in the extended C band with 50 GHz channel spacing. | |||
ESC function | Supported. | |||
PRBS function | Supported on the WDM side. | |||
Monitoring of alarms and performance events | Monitors BIP8 bytes (Bursty mode) to help locate line failures. | |||
Monitors parameters such as the bias current, temperature, and optical power of the laser. | ||||
Monitors OTN alarms and performance events. | ||||
Regeneration board | Supported | |||
Physical clock | Supported | |||
Electrical-layer ASON | Supported | |||
Optical-layer ASON | Supported | |||
Protection scheme | Supports ODUk SNCP. | |||
Supports tributary SNCP protection. | ||||
Supports intra-board 1+1 protection (when working with the OLP/DCP/QCP board). | ||||
Loopback | WDM-side loopback | Supported | ||
Channel loopback | Port in 100G mode: ODUk (k=0, 1, 2, 3, flex) | |||
Port in 200G mode: ODUk (k=0, 1, 2, 3, 4, flex) | ||||
Latency measurement | The board supports latency measurement in the WDM-side optical port direction (upstream direction). | |||
When higher-order ODU4 cross-connections are created on the board, TCM latency measurement is supported for higher-order ODU4 channels. When lower-order ODUk cross-connections are created on the board, PM/TCM latency measurement is supported for higher-order ODU4 channels, and TCM latency measurement is supported for lower-order ODUk channels. | ||||
The board supports PM and TCM latency measurement at the ODUCn layer. | ||||
Function and Features (relay mode) | ||||
Basic function | Applies to electrical regenerator stations in the system to electrically regenerate optical signals. | |||
OTN function | Port in 100G mode | Supports the OTU4 interface on the WDM side. | ||
Supports the OTN frame format and overhead processing defined by ITU-T G.709. | ||||
OTU4 layer: supports SM overhead processing. | ||||
ODU4 layer: supports PM and TCM overhead processing, and non-intrusive monitoring of PM and TCM overheads. | ||||
Port in 200G mode | Supports the OTUC2 interface on the WDM side. | |||
OTUC2 layer: supports SM overhead processing. | ||||
ODUC2 layer: supports PM and TCM overhead processing, and non-intrusive monitoring of PM and TCM overheads. | ||||
WDM specifications | Supports DWDM specifications. | |||
Tunable wavelength function | TNU5N501P support tunable wavelength optical modules that provide for 96 wavelengths tunable in the extended C band with 50 GHz channel spacing. | |||
ESC function | Supported | |||
Monitoring of alarms and performance events | Monitors BIP8 bytes (Bursty mode) to help locate line failures. | |||
Monitors parameters such as the bias current, temperature, and optical power of the laser. | ||||
Monitors OTN alarms and performance events. | ||||
Optical-layer ASON | Supported | |||
WDM-Side Pluggable Optical Module Supported | ||||
CFP- 200G-(1529.17nm to 1567.1nm)(DWDM,Tunable,T15)-SMF Specifications 40000ps/nm-Extended C band-Tunable wavelength-ePDM-e16QAM (configurable rate and modulation format, coherent, LHC, T22)-200G CFP Specifications 40000ps/nm-Extended C band-Tunable wavelength-ePDM-e16QAM (configurable rate and modulation format, coherent, LHD, high optical power, T23)-200G CFP 40000ps/nm-Extended C band-Tunable wavelength-ePDM-e16QAM (configurable rate and modulation format, coherent, LHD, T23)-200G CFP Specifications CFP-100G(4x25G/28G,Dualrate)-1295nm to 1310nm(LR4)-SMF-10km-SP Specifications |
||||
Mechanical Specifications | ||||
Dimensions(W x H x D) | 477.3mm x 30.5mm x 220.0mm | |||
Weight (kg) | 4.05 | |||
Typical Power Consumption (W) | 217 | |||
Maximum Power Consumption(W) | 230 |
Bandwidth |
100G, 200G |
---|---|
Features | |
Port |
1-10 |
As a global leading professional Huawei network hardware and solution provider, we have delivered Huawei, ZTE, Nokia, CISCO, Fiberhome, etc, equipment to 500+ customer groups in 90+ countries over the past 15 years. Know more
Strict 3-Level Quality Control procedure: 1st-Level inspection; 2nd-Level In-stock test; 3rd-Level 24-hour pre-delivery test to guarantee premium quality. Know more
What we offer to our customers is value rather than price. We enable customers to enjoy the benefit of our reliable delivery products and generate more value to the greatest extent. Know more
We provide customers with personalized and professional tech support by remote diagnosis, fault-location and troubleshooting. "We are here to help you instantly when you need it."
We continuously offer flexible payment methods such as Wire Transfer, Paypal, L/C, Western Union and Alipay, to help customer enjoy a more convenient shopping experience. Know more
We provide extensive document resources to guide our customers to targetly solve the problem they may meet. Know more
Our products come with 1-year warranty. Customers can ask for a repair, replacement or refund for a major product failure. Know more
We won't stop to develop rapid and cost effective shipping options, providing the excellent experience to our global customers. Know more
We offer not only network products but also network proposal, mainstream and cost-effective solution to assist customers eliminate the concerns.
Reviews
There are no reviews yet.