![Icon [all products]](https://www.thunder-link.com/tl-content/uploads/2022/05/Icon-all-products-1.svg "Icon [all products]"){kind=icon}
All products
in stock 3-5 days lead time
TNU6U402C
Huawei OSN 9800 U64/U32/U16/M24 2-port 100G Universal Line Service Processing Board
20
People watching this product now!
Hardware Compatibility
Hardware Compatibility x
Backed up by our experienced pre-sales support team, and volume documentation, to avoid purchasing incompatible hardware.
Hardware Tested
Hardware Tested x
In order to avoid hardware malfunction, each equipment will be strictly tested before delivery and the test report will be packed inside equipment and delivered together. Learn more
Description
TNU6U402C 2-port 100G universal Line Service Processing Board
The U402C board has one functional version: TNU6, and have one variant of TNU6U402CQ01
The U6U402C board supports the following service conversions:
- 160 x ODU0/80 x ODU1/20 x ODU2/20 x ODU2e/4 x ODU3/2 x ODU4/160 x ODUflex<->2 x ODU4<->2 x OTU4
- Packets<->2 x ODU4<->2 x OTU4
- 8 x STM-64/32 x STM-16<->2 x ODU4<->2 x OTU4
When configuring virtual SDH ports, observe the following requirements:
- The board supports a maximum of 32 virtual SDH ports, among which four adjacent ports are classified into one group. Therefore, the eight groups of virtual SDH ports are V_SDH_1 to V_SDH_4, V_SDH_5 to V_SDH_8, …, and V_SDH_29 to V_SDH_32
- The total capacity of each port group cannot exceed 10 Gbit/s. Therefore, if an STM-16 service is configured for one port in a group, STM-64 services cannot be configured for other ports in the group
- When configuring STM-64 services, you can select only the first optical port of each group, such as V_SDH_1 and V_SDH_5
- When configuring STM-16 services for the virtual ports, use the ports in the same group. Do not use the ports in another group unless no ports are left in the current group. For example, to configure an STM-16 service on three of the virtual SDH ports, use V_SDH_1, V_SDH_2, and V_SDH_3; to configure an STM-16 service on five of the virtual SDH ports, use V_SDH_1, V_SDH_2, V_SDH_3, V_SDH_4, and V_SDH_5
The U6U402C board is hybrid line board and supports a mixture of OTN, SDH, and packet services. The U6U402C board processes and converts the received service signals into two OTU4 signals, which are carried over ITU-T G.694.1-compliant DWDM wavelengths
Tech Specs
| Front Panel | ||||
 |
||||
| Valid Slots | ||||
| OptiX OSN 9800 U32 Standard/Enhanced subrack:IU1-IU32 OptiX OSN 9800 U64 Standard/Enhanced subrack:IU1-IU64 OptiX OSN 9800 M24 subrack: (IU1, IU13), (IU2, IU14), …… , (IU11, IU23), (IU12, IU24) |
||||
| Initial version of different subrack: | ||||
| V100R019C10SPC700 | ||||
| Functions and features (line mode) | ||||
| OTN functions | Supports the OTU4 interface on the WDM side | |||
| Supports the OTN frame format and overhead processing defined in ITU-T G.709 | ||||
| OTU4 layer: supports SM overhead processing | ||||
| ODUk (k = 0, 1, 2, 2e, 3, 4, flex) layer: supports PM and TCM overhead processing, and non-intrusive monitoring of PM and TCM overheads | ||||
| FEC coding | Supports FEC encoding | |||
| Tunable wavelength function | Not supported | |||
| Latency measurement | The board supports latency measurement in the WDM-side optical port direction (upstream direction). It supports latency measurement at the PM and TCM layers
|
|||
| Optical-layer ASON | Supported | |||
| PRBS test function | Supports the PRBS function on the WDM side | |||
| Protection schemes | Supports ODUk SNCP | |||
| Supports tributary SNCP protection | ||||
| Alarms and performance events monitoring | Monitors BIP8 bytes (Bursty mode) to help locate line failures | |||
| Monitors parameters such as the bias current, temperature, and optical power of the laser | ||||
| Monitors OTN alarms and performance events | ||||
| ESC | Supported | |||
| SDH functions and features of the board | ||||
| Overhead processing | Processes the section overheads of STM-16/STM-64 signals | |||
| Supports the transparent transmission and termination of path overheads | ||||
| Supports the setting and query of the J0, J1, and C2 bytes | ||||
| Supports ECC communication | ||||
| Supports transparent transmission of DCC channels | ||||
| Protection schemes | Supports the SNCP | |||
| Supports 1+1 single-ended linear MSP | ||||
| Supports ring MSP | ||||
| Alarm and performance event monitoring | Monitors B1 bytes to help locate faults | |||
| Monitors B2 bytes to help locate faults | ||||
| Loopback | Supports VC loopbacks | |||
| Supports Virtual Port loopbacks | ||||
| SDH clock | Supported | |||
| Outband DCN | supported | |||
| SDH ASON | Not supported | |||
| WDM-Side Pluggable Optical Module Supported | ||||
| QSFP28-100G(4x25G/28G,Dualrate)-1295nm to 1310nm(LR4)-SMF-10km | ||||
| Mechanical Specifications | ||||
| Dimensions(W x H x D,mm) | 477.3×30.5x 220 | |||
| Weight (kg) | 3.29 | |||
| Typical Power Consumption (W) | 182 | |||
| Maximum Power Consumption | 193 | |||
Additional information
| Bandwidth |
100G |
|---|---|
| Features | |
| Port |
1-10 |
Q&A
Matching Products…
Reviews (0)
Why Thunder-link.com
Reviews
There are no reviews yet.