| Front Panel |
 |
| Valid Slots |
OptiX OSN 9800 U32 Standard/Enhanced subrack:IU1-IU32
OptiX OSN 9800 U64 Standard/Enhanced subrack:IU1-IU64
OptiX OSN 9800 M24 subrack:
(IU1, IU13), (IU2, IU14), …… , (IU11, IU23), (IU12, IU24) |
| Initial version of different subrack: |
| V100R019C10SPC600 |
| Functions and features (line mode) |
| OTN functions |
Port in 100G mode: |
| Supports the OTU4 interface on the WDM side |
| Supports the OTN frame format and overhead processing defined by ITU-T G.709 |
| OTU4 layer: supports SM overhead processing |
| ODUk (k=0, 1, 2, 2e, 3, 4, flex) layer: supports PM and TCM overhead processing, and non-intrusive monitoring of PM and TCM overheads |
| Port in 200G mode: |
| Supports the OTUC2 interface on the WDM side |
| OTUC2 layer: supports SM overhead processing |
| ODUC2 layer: supports PM and TCM overhead processing |
| ODUk (k=0, 1, 2, 2e, 3, 4, flex) layer: supports PM and TCM overhead processing, and non-intrusive monitoring of PM and TCM overheads |
| Typical channel spacing |
200G ePDM-e16QAM: 50GHz Flex/62.5GHz Flex/75GHz Flex |
| Others modulation format: 50GHz Fix |
| WDM specification |
Supports ITU-T G.694.1-compliant DWDM specifications |
| Latency measurement |
The board supports latency measurement in the WDM-side optical port direction (upstream direction)
When higher-order ODU4 cross-connections are created on the board, TCM latency measurement is supported for higher-order ODU4 channels When lower-order ODUk cross-connections are created on the board, PM/TCM latency measurement is supported for higher-order ODU4 channels, and TCM latency measurement is supported for lower-order ODUk channels.
The board supports PM and TCM latency measurement at the ODUCn layer |
| Optical-layer ASON |
Supported |
| PRBS test function |
Supports the PRBS function on the WDM side |
| Protection schemes |
Supports ODUk SNCP |
| Supports tributary SNCP protection |
| Supports intra-board 1+1 protection (when working with the OLP or DCP board) |
| Alarms and performance events monitoring |
Monitors BIP8 bytes (Bursty mode) to help locate line failures |
| Monitors parameters such as the bias current, temperature, and optical power of the laser |
| Monitors OTN alarms and performance events |
| ESC |
Supported |
| Functions and features (relay mode) |
| Basic function |
Electrically regenerates optical signals at an electrical REG station |
| Supported service rate |
OTU4: OTN service at a rate of 111.81 Gbit/s |
| OTUC2: OTN service at a rate of 224.61 Gbit/s |
| WDM specification |
Supports ITU-T G.694.1-compliant DWDM specifications |
| Tunable wavelength function |
The board supports tunable wavelengths of WDM-side optical signals in Super C band (1524 nm to 1573 nm) |
| ESC function |
Supported |
| Physical clock |
Not supported |
| PRBS function |
Not supported |
| Alarm and performance event monitoring |
Monitors BIP8 bytes (Bursty mode) to help locate line failures |
| Monitors parameters such as the bias current, temperature, and optical power of the laser |
| Monitors OTN alarms and performance events |
| WDM-Side Pluggable Optical Module Supported |
CFP- 200G-(1529.17nm to 1567.1nm)(DWDM,Tunable,T15)-SMF
40000ps/nm-Extended C band-Tunable wavelength-ePDM-e16QAM (configurable rate and modulation format, coherent, LHC, T22)-200G CFP
40000ps/nm-Extended C band-Tunable wavelength-ePDM-e16QAM (configurable rate and modulation format, coherent, LHD, high optical power, T23)-200G CFP
40000ps/nm-Extended C band-Tunable wavelength-ePDM-e16QAM (configurable rate and modulation format, coherent, LHD, T23)-200G CFP
Extended C band-Tunable wavelength-ePDM-200G e16QAM/100G QPSK/etc.(SDFEC2, LHB, T2U)-CFP
Super C band-Tunable wavelength-ePDM-200G e16QAM/100G QPSK/etc.(SDFEC2, LHD, F23)-CFP
Super C band-Tunable wavelength-ePDM-200G 16QAM/100G QPSK/etc.(SDFEC/SDFEC2, Metro, F15)-CFP
Extended C band-Tunable wavelength-ePDM-200G e16QAM/100G QPSK/etc.(Configurable rate and modulation format, Coherent, LHD, A23)-CFP
Super C band-Tunable wavelength-200G e16QAM/100G QPSK/etc.(LHD, High optical power, T23)-CFP-PIN |
| Mechanical Specifications |
| Dimensions(W x H x D,mm) |
477.3×30.5x 220 |
| Weight (kg) |
3.95 |
| Typical Power Consumption (W) |
183 |
| Maximum Power Consumption |
195 |
Reviews
There are no reviews yet.
There are no reviews yet.