![Icon [all products]](https://www.thunder-link.com/tl-content/uploads/2022/05/Icon-all-products-1.svg "Icon [all products]"){kind=icon}
All products
0 in stock 3-5 days lead time
TNV1N210X01
Huawei OSN 9800 U64 U32 U16 10-port 10G Line Service Processing Board
10
People watching this product now!
Hardware Compatibility
Hardware Compatibility x
Backed up by our experienced pre-sales support team, and volume documentation, to avoid purchasing incompatible hardware.
Hardware Tested
Hardware Tested x
In order to avoid hardware malfunction, each equipment will be strictly tested before delivery and the test report will be packed inside equipment and delivered together. Learn more
Description
TNV1N210 is a 10-port 10G line service processing board.
It has only have functional version TNV1 and only one variant TNV1N210X01.
Applied to Huawei OSN 9800 U64, U32 and U16.
TNV1N210X01 at two add/drop sites must have the same ODU timeslot allocation mode.
Supports electrical cross-connections, OTN interfaces, and ESC communication
Supports Optical-layer ASON
Supports Loopback only in line mode
Supports ODUk (k=0, 1, flex, 2) SNCP, tributary SNCP protection, intra-board 1+1 protection (when working with the OLP/DCP/QCP board) only in line mode; When the cross-connect granularity is ODUflex, the board does not support tributary SNCP protection
TNV1N210X01 is a 10-port 10G line service processing board, applied to Huawei OSN 9800 U64, U32 and U16. It converts 80 ODU0, 40 ODU1, 10 ODU2, or 80 ODUflex signals into 10 OTU2 signals carried over 10 ITU-T G.694.1 compliant DWDM wavelengths (vice versa), or converts 10 ODU2e signals into 10 OTU2e signals carried over 10 ITU-T G.694.1 compliant DWDM wavelengths (vice versa). Each port on the board supports a mix of ODU0, ODU1, and ODUflex signals.
Tech Specs
| Front Panel | ||||
 |
||||
| Valid Slots | ||||
| OptiX OSN 9800 U64 Standard subrack: IU1-IU64 OptiX OSN 9800 U32 Standard subrack: IU1-IU32 OptiX OSN 9800 U16 subrack: IU1-IU14 |
||||
| Initial version of different subrack: | ||||
| V100R001C20 | ||||
| Functions and features (line mode) | ||||
| Basic functions | Supports the following service conversions: | |||
| 80 x ODU0/40 x ODU1/80 x ODUflex/10 x ODU2<->10 x OTU2 | ||||
| 10 x ODU2e<->10 x OTU2e | ||||
| Each port on the board supports a mix of ODU0, ODU1, and ODUflex signals | ||||
| Cross-connect capabilities | Supports the cross-connection of 80 ODU0 signals, 40 ODU1 signals, 80 ODUflex signals, or 10 ODU2/ODU2e signals to/from the cross-connect board. | |||
| OTN functions | Supports OTU2/OTU2e on the WDM side. | |||
| Supports the OTN frame format and overhead processing defined by ITU-T G.709. | ||||
| OTU2 layer: supports SM overhead processing. | ||||
| ODUk (k=0, 1, 2, flex) layer: supports PM and TCM overhead processing, and non-intrusive monitoring of PM and TCM overheads. | ||||
| WDM specification | Supports DWDM specifications. | |||
| Tunable wavelength function | Supports tunable wavelength optical modules that provide for: 40 wavelengths tunable in the C band with 100 GHz channel spacing 80 wavelengths tunable in the C band with 50 GHz channel spacing |
|||
| ESC | Supported | |||
| PRBS test function | Supports the PRBS function on the WDM side. | |||
| FEC coding | Supports ITU-T G.709-compliant forward error correction (FEC) on the WDM side. | |||
| Supports ITU-T G.975.1-compliant AFEC-2 on the WDM side. | ||||
| NOTE: Boards that use different FEC modes cannot interconnect with each other. | ||||
| Alarms and performance events monitoring | Monitors BIP8 bytes (Bursty mode) to help locate line failures. | |||
| Monitors parameters such as the bias current, temperature, and optical power of the laser. | ||||
| Monitors OTN alarms and performance events. | ||||
| Regeneration board | The WDM-side signals of a N210 board can be regenerated by another ND2/NQ2/N210/N216. | |||
| Latency measurement | The board supports latency measurement in the WDM-side optical port direction (upstream direction). When higher-order ODUk cross-connections are created on the line board, TCM section latency measurement is supported for higher-order ODUk channels. When lower-order ODUk cross-connections are created on the line board, PM/TCM section latency measurement is supported for higher-order ODUk channels, and TCM section latency measurement is supported for lower-order ODUk channels. | |||
| Functions and features (relay mode) | ||||
| Basic function | Electrically regenerates optical signals at an electrical REG station. | |||
| Supported service rate | OTU2: OTN service at a rate of 10.71 Gbit/s | |||
| OTU2e: OTN service at a rate of 11.1 Gbit/s | ||||
| OTN function | Supports OTU2/OTU2e on the WDM side. | |||
| Supports the OTN frame format and overhead processing defined by ITU-T G.709. | ||||
| OTU2 layer: supports SM overhead processing. | ||||
| ODU2 layer: supports PM and TCM overhead processing, and non-intrusive monitoring of PM and TCM overheads. | ||||
| WDM specification | Supports DWDM specifications. | |||
| Tunable wavelength function | Supports tunable wavelength optical modules that provide for: | |||
| 40 wavelengths tunable in the C band with 100 GHz channel spacing | ||||
| 80 wavelengths tunable in the C band with 50 GHz channel spacing | ||||
| ESC function | Supported | |||
| PRBS function | Not supported | |||
| FEC coding | Supports ITU-T G.709-compliant forward error correction (FEC) on the WDM side. | |||
| Supports ITU-T G.975.1-compliant AFEC-2 on the WDM side. | ||||
| Note: Boards that use different FEC modes cannot interconnect with each other. | ||||
| Alarms and performance events monitoring | Monitors BIP8 bytes (Bursty mode) to help locate line failures. | |||
| Monitors parameters such as the bias current, temperature, and optical power of the laser. | ||||
| Monitors OTN alarms and performance events. | ||||
| WDM-Side Pluggable Optical Module Supported | ||||
| XFP-10G-(1529.17nm to 1560.61nm)(DWDM,50GHz,Tunable)-SMF-40km specifications XFP-10G-(1529.17nm to 1560.61nm)(DWDM,100GHz)-SMF-40km Specifications |
||||
| Mechanical Specifications | ||||
| Dimensions (W x H x D,mm) | 30.5×477.3x 220 | |||
| Weight (kg) | 2.8 | |||
| Typical Power Consumption (W) | 142 | |||
| Maximum Power Consumption (W) | 156 | |||
Additional information
| Weight | 3.0 kg |
|---|---|
| Dimensions | 37.5 × 34.0 × 7.5 cm |
| Bandwidth |
10G |
| Features | |
| Port |
1-10 |
Matching Products…
Reviews (0)
Why Thunder-link.com
Reviews
There are no reviews yet.