![Icon [all products]](https://www.thunder-link.com/tl-content/uploads/2022/05/Icon-all-products-1.svg "Icon [all products]"){kind=icon}
All products
in stock Ready to ship
TNV1T502
Huawei OSN 9800 M24, U16, U32, U64 2-port 200G Tributary Service Processing Board
10
People watching this product now!
Hardware Compatibility
Hardware Compatibility x
Backed up by our experienced pre-sales support team, and volume documentation, to avoid purchasing incompatible hardware.
Hardware Tested
Hardware Tested x
In order to avoid hardware malfunction, each equipment will be strictly tested before delivery and the test report will be packed inside equipment and delivered together. Learn more
Description
TNV1T502 2-port 200G Tributary Service Processing Board
Applied to Huawei OSN 9800 M24, U16, U32, U64, it supports electrical cross-connections, OTN interfaces, and ESC communication
TNV1T502 board supports PRBS test, ESC, Alarms and performance events monitoring, Physical clock and Electrical-layer ASON functions
TNV1T502 board supports Loopback and Protection scheme of ODUk SNCP (k= 3, 4, flex), client 1+1 protection, tributary SNCP protection
TNV1T502 board supports SDH clock, Outband DCN for SDH function
TNV1T502 is a 2-port 200G Tributary Service Processing Board applied to Huawei OSN 9800 M24, U16, U32, U64. The T502 board supports electrical cross-connections, OTN interfaces, and ESC communication.
Tech Specs
| Front Panel | |
 |
|
| Valid Slots | |
| OptiX OSN 9800 U16 subrack: IU1-IU14 OptiX OSN 9800 U32 Standard subrack: IU1-IU32 OptiX OSN 9800 U32 Enhanced subrack: IU1-IU32 OptiX OSN 9800 U64 Standard subrack: IU1-IU64 OptiX OSN 9800 U64 Enhanced subrack: IU1-IU64 |
|
| Initial Version of Different Subrack | |
| V100R019C10SPC300 | |
| Function and Features | |
| Basic functions | Supports the following service conversions: |
| 2 x 100GE (Bit Transparent Mapping/MAC Transparent Mapping) <->2 x ODU4 | |
| 2 x 100GE (MAC Transparent Mapping) <->2 x ODUflex | |
| 2 x OTU4<->2 x ODU4 | |
| 2 x 50GE (Bit Transparent Mapping/MAC Transparent Mapping) <->2 x ODUflex | |
| 2 x 40GE (TTT+GMP) <->2 x ODU3 | |
| 2 x 200GE (Bit Transparent Mapping/MAC Transparent Mapping)<->4 x ODUflex | |
| 2 x FlexE Unaware (50G) (BMP) <->2 x ODUFlex | |
| 2 x FlexE Unaware (100G) (GMP) <->2 x ODU4 | |
| 2 x FlexE Aware (200G) (BGMP) <->4 x ODUFlex | |
| NOTE: Only the 50G, 100G, and 200G physical ports support access of FlexE services. | |
| FlexE group mode | Unaware: FlexE 50G /FlexE 100G Aware: FlexE 200G |
| NOTE: For a T502 board, two physical ports cannot be bound to a FlexE group. | |
| Service encryption | Supports setting the encryption function by port. |
| NOTE: Client-side port encryption is supported in the case of 100GE/50GE/40GE/200GE services. ClientLP port encryption is supported in the case of FlexE services. |
|
| Client-side service type | 200GE: Ethernet service at a rate of 206.25 Gbit/s |
| 100GE: Ethernet service at a rate of 103.125 Gbit/s | |
| OTU4: OTN service at a rate of 111.81 Gbit/s | |
| 50GE: Ethernet service at a rate of 51.5625 Gbit/s | |
| 40GE: Ethernet service at a rate of 41.25 Gbit/s | |
| FlexE: flexible Ethernet service | |
| FlexE Unaware (50G) service at a rate of 51.5625 Gbit/s | |
| FlexE Unaware (100G) service at a rate of 103.125 Gbit/s | |
| FlexE Aware (200G) service at a rate of 206.25 Gbit/s | |
| Cross-connect capabilities | Supports backplane cross-connections of two ODU3/two ODU4/four ODUflex signals from/to the cross-connect board. |
| OTN functions | Supports overhead processing defined by ITU-T G.709. The service mapping process complies with ITU-T G.709 and G.Sup43. |
| ODUflex layer: supports PM overhead processing. | |
| ODU3 layer: supports PM overhead processing. | |
| ODU4 layer: | |
| When the client-side service type is 100GE, supports PM overhead processing. | |
| When the client-side service type is OTU4, supports PM and TCM overhead processing, and non-intrusive monitoring of PM and TCM overheads. | |
| OTU4 layer: supports SM overhead processing. | |
| FEC coding | Supports ITU-T G.709-compliant forward error correction (FEC) on the client side when the client-side service type is OTU4. When the client-side service type is FlexE, 100GE, 200GE or 50GE, only RS_FEC coding is supported. |
| ALS function | Supports the ALS function on the client side when client services are non-OTN services. |
| LLDP function | When the client-side service type is ethernet service, the board supports the LLDP function. |
| NOTE: LLDP is not supported in the case of FlexE services. When interworking with TNU1CTU or TNS1CTU, T502 does not support LLDP. |
|
| Test frame | When the client-side service type is 200GE/100GE/50GE/40GE, the board supports test frame. |
| Latency measurement | When non-OTN services are received on the client side of the board, the PM section latency measurement is supported in the backplane direction (upstream direction). When OTN services are received on the client side of the board, the TCM section latency measurement is supported in the optical port direction (downstream direction). |
| IEEE 1588v2 | The board supports IEEE 1588v2 only when 100GE/50GE/200GE services are received on the client side, and the port service mapping mode is MAC Transparent Mapping. |
| NOTE: IEEE 1588v2 is not supported in the case of FlexE services. | |
| ITU-T G.8275.1 | The board supports ITU-T G.8275.1 only when 100GE/50GE/200GE services are received on the client side, and the port service mapping mode is MAC Transparent Mapping. |
| NOTE:ITU-T G.8275.1 is not supported in the case of FlexE services. | |
| ITU-T G.8273.2 | The board supports ITU-T G.8273.2 only when it is installed in an OptiX OSN 9800 M24, subrack, 100GE/50GE/200GE services are received on the client side, and the port service mapping mode is MAC Transparent Mapping. |
| NOTE:ITU-T G.8273.2 is not supported in the case of FlexE services. | |
| Client side | Supports FlexE group inloop. |
| OTN/Liquid OTN functions and features of the board (line mode) | |
| Basic function | 160 x ODU0/ 80 x ODU1/ 20 x ODU2/ 20 x ODU2e/ 4 x ODU3/ 2 x ODU4/ 160 x ODUflex<->2 x ODU4<->2 x OTU4 |
| (1 to 2k) x OSUflex <->160 x ODU0/ 80 x ODU1/ 20 x ODU2/ 20 x ODU2e/ 4 x ODU3/ 2 x ODU4/ 160 x ODUflex<->2 x ODU4<->2 x OTU4 | |
| NOTE: When working with the TNU2CTU/TNU4CTU/TNU5CTU/TNG1CXP/TNG3CXP/TNG4CXP board, the board supports Liquid OTN applications and a maximum of 2000 OSUflex channels. Each of PORT1 and PORT2 supports a maximum of 1000 OSUflex channels. ODU0/ODUflex (1 x 1.25G) supports a maximum of 500 OSUflex sub-channels, whereas any other ODUk channel supports a maximum of 1000 OSUflex channels. |
|
| Cross-connect capabilities | Implements service grooming when working with cross-connect boards. |
| 2000 x OSUflex/160 x ODU0/80 x ODU1/20 x ODU2/20 x ODU2e/4 x ODU3/2 x ODU4/160 x ODUflex | |
| OTN functions | Supports OTU4 interfaces on the WDM side. |
| Uses the frame formats and overhead processing methods defined in ITU-T G.709. | |
| ODUk (k = 0, 1, 2, 2e, 3, 4, or flex) layer: Supports PM and TCM overhead processing, and non-intrusive monitoring of PM and TCM overheads. | |
| OSUflex layer: Supports PM and TCM overhead processing, and non-intrusive monitoring of PM and TCM overheads. | |
| OTU4 layer: Supports SM overhead processing. | |
| FEC coding | Supports FEC encoding. |
| PRBS test function | Supports the PRBS function on the WDM side. |
| Latency measurement | The board supports latency measurement in the WDM-side optical port direction (upstream direction). |
| When higher-order ODU4 cross-connections are created on the board, TCM latency measurement is supported for higher-order ODU4 channels. When lower-order ODUk cross-connections are created on the board, PM/TCM latency measurement is supported for higher-order ODU4 channels, and TCM latency measurement is supported for lower-order ODUk channels. | |
| The board supports latency measurement at the OSUflex layer. | |
| SDH functions and features of the board | |
| Basic function | A maximum of 2 x 40 Gbit/s SDH services are supported. |
| 8 x STM-64<->8 x ODU2<->2x ODU4<->2 x OTU4 | |
| 32 x STM-16<->32 x ODU1<->2 x ODU4<->2 x OTU4 | |
| Overhead processing | Processes the section overheads of STM-16/STM-64 signals. |
| Supports the transparent transmission and termination of path overheads. | |
| Supports the setting and query of the J0, J1, and C2 bytes. | |
| Supports ECC communication. | |
| Supports transparent transmission of DCC channels. | |
| Service processing | Supports the VC-12/VC-3, VC-4 services, VC-4-4c concatenation services, VC-4-16c concatenation services, and VC-4-64c concatenation services. |
| Pluggable Optical Module Supported | |
| QSFP-DD,4*50Gb/s PAM4(1310nm band),200Gb/s,-1.7dBm,-7.7dBm,LC,SMF,10km QSFP28-100G(4x25G/28G,Dualrate)-1295nm to 1310nm(LR4)-SMF-10km QSFP28-100G(4x25G)-850nm(SR4)-MPO-MMF-0.1km QSFP28-103.1G/111.8G(4x25G/4x28G,Dualrate)-1310nm(ER4 Lite)-SMF-30km QSFP28-100G(4x25G)-1271 to 1331nm(CLR4)-SMF-2km QSFP28-100G(4x25G)-1310nm(ER4)-SMF-40km QSFP+ -40G(4x10G)-1310nm(PSM4)-MPO-SMF-10km QSFP+ -40G(4x10G)-850nm(SR4)-MPO-MMF-0.3km QSFP+ -40G(4x10G)-1271nm to 1331nm(CWDM,LR4)-SMF-10km QSFP28,50G,1311nm,two-fiber bidirectional,10km,PAM4 |
|
| Mechanical Specifications | |
| Dimensions (W x H x D, mm) | 477.3 x 30.5 x 220.0 |
| Weight (kg) | 2.9 |
| Typical Power Consumption (W) | 180 |
| Maximum Power Consumption (W) | 191 |
Additional information
| Bandwidth |
200G |
|---|---|
| Features | |
| Port |
1-10 |
Reviews (0)
Why Thunder-link.com
Reviews
There are no reviews yet.