| Front Panel |
 |
| Valid Slots |
OSN9800 U64 Standard subrack: IU1-IU64
OSN9800 U16 subrack: IU1-IU14
OSN 9800 U32 Standard subrack: IU1-IU32 |
| Initial Version: V100R001C00 |
| Functions and features (line mode) |
| Basic function |
Supports the following service conversions:
80 x ODU0/40 x ODU1/10 x ODU2/10 x ODU2e/2 x ODU3/1 x ODU4/80 x ODUflex <-> 1 x OTU4
Supports a mix of ODU0, ODU1, ODU2, ODU2e, ODU3, and ODUflex signals. |
| Cross-connect capabilities |
Supports backplane cross-connections of 80 ODU0, 40 ODU1, 10 ODU2, 10 ODU2e, 2 ODU3, 1 ODU4, or 80 ODUflex signals from/to the cross-connect board. |
| OTN functions |
Supports OTU4 interface the WDM side.
Supports OTN frame format and overhead processing defined by ITU-T G.709.
OTU4 layer: supports SM overhead processing.
ODUk (k=0, 1, 2, 2e, 3, 4, flex) layer: supports PM and TCM overhead processing, and non-intrusive monitoring of PM and TCM overheads. |
| WDM specification |
Supports ITU-T G.694.1-compliant DWDM specifications. |
| Tunable wavelength function |
Supports tunable wavelength optical modules that provide for 80 wavelengths tunable in the C band with 50 GHz channel spacing. |
| ESC function |
Supported |
| PRBS function |
Supports the PRBS function on the WDM side. |
| FEC coding |
TNV1N401T01: HFEC
TNV1N401C01: FEC
TNU1N401: SDFEC
TNU2N401/TNU3N401: SDFEC2
TNV2N401: HFEC
TNU5N401:
CFP-100G(4x25G/28G,Dualrate)-1295nm to 1310nm(LR4)-SMF-10km-SP modules: FEC
Other modules: SDFEC2 and HFEC PLUS
NOTE:
Boards that use different FEC modes cannot interconnect with each other. |
| Alarm and performance event monitoring |
Monitors BIP8 bytes (Bursty mode) to help locate line failures.
Monitors parameters such as the bias current, temperature, and optical power of the laser.
Monitors OTN alarms and performance events. |
| Regeneration board |
The WDM-side signals of an N401 board can be regenerated using the N401, N402, LTX, or NS4 board of the same type. For example,
The type of the TNV1N401T01 board is T01, and the WDM-side signals of the TNV1N401T01 board can be regenerated using the N401, N402, LTX, or NS4 board of the T01 type, such as TNV1N401T01, TNV2N401T01, TNV2N402T01, TN11LTXT01, TN12LTXT01, TN54NS4T01, TN57NS4T01. |
| Latency measurement |
Supports latency measurement in the WDM-side optical port direction (upstream direction). When higher-order ODUk cross-connections are created on the line board, TCM section latency measurement is supported for higher-order ODUk channels. When lower-order ODUk cross-connections are created on the line board, PM/TCM section latency measurement is supported for higher-order ODUk channels, and TCM section latency measurement is supported for lower-order ODUk channels.
NOTE:
The TNU1N401/TNV1N401/TNU2N401/TNV2N401 board supports latency measurement only for higher-order ODU4 channels. |
| Physical clock |
Not supported |
| Functions and features (relay mode) |
| Basic function |
Electrically regenerates optical signals at an electrical REG station. |
| Supported service rate |
OTU4: OTN service at a rate of 111.81 Gbit/s |
| OTN function |
Supports OTU4 interface the WDM side.
Supports the OTN frame format and overhead processing defined by ITU-T G.709.
OTU4 layer: supports SM overhead processing.
ODU4 layer: supports PM and TCM overhead processing, and non-intrusive monitoring of PM and TCM overheads. |
| WDM specification |
Supports ITU-T G.694.1-compliant DWDM specifications. |
| Tunable wavelength function |
Supports tunable wavelength optical modules that provide for 80 wavelengths tunable in the C band with 50 GHz channel spacing. |
| FEC coding |
TNV1N401: HFEC
TNU1N401: SDFEC
TNU2N401/TNU3N401: SDFEC2
TNV2N401: HFEC
TNU5N401:
Colored-light Optical modules: SDFEC2 and HFEC PLUS
NOTE:
Boards that use different FEC modes cannot interconnect with each other. |
| Alarm and performance event monitoring |
Monitors BIP8 bytes (Bursty mode) to help locate line failures.
Monitors parameters such as the bias current, temperature, and optical power of the laser.
Monitors OTN alarms and performance events. |
| WDM-Side Fixed Optical Module 40000 ps/nm-C Band-Tunable Wavelength-ePDM-QPSK(HFEC)-PIN |
| line code format |
ePDM-QPSK (HFEC) |
| Transmitter parameter specifications at point S |
| center frequency (THz) |
192.1 to 196.05 |
| center frequency deviation (GHz) |
±2.5 |
| minimum mean launched power (dBm) |
-5 |
| maximum mean launched power(dBm) |
0 |
| maximum -3 db spectral width (nm) |
0.35 |
| dispersion tolerance (back-to-back) (ps/nm) |
40000 |
| Receiver parameter specifications at point R |
| receiver type |
PIN |
| operating wavelength range (nm) |
1529 to 1561 |
| receiver sensitivity (dBm) |
-16 |
| minimum receiver overload (dBm) |
0 |
| maximum reflectance (dB) |
-27 |
| Mechanical Specifications |
| Dimensions (H x W x D,mm) |
477.3 x 30.5 x 220.0 |
| Weight (kg) |
3.6 |
| Typical Power Consumption (W) |
160 |
| Maximum Power Consumption (W) |
172 |
![Icon [all products]](https://www.thunder-link.com/tl-content/uploads/2022/05/Icon-all-products-1.svg "Icon [all products]"){kind=icon}
All products
Reviews
There are no reviews yet.
There are no reviews yet.