TNV3G220

Huawei OSN 9800 M24/U32/U64 20-port 10G General Service Processing Board

0 in stock      Ready to ship

14 People watching this product now!
PN: AA131A20 Category:
Hardware Compatibility

Hardware Compatibility x

Backed up by our experienced pre-sales support team, and volume documentation, to avoid purchasing incompatible hardware.

Hardware Tested

Hardware Tested x

In order to avoid hardware malfunction, each equipment will be strictly tested before delivery and the test report will be packed inside equipment and delivered together. Learn more

Description

TNV3G220 20-port 10G General Service Processing Board

Applied to Huawei OSN 9800 M24, U32, U64, it supports supports electrical cross-connections, OTN interfaces, and ESC communication

TNV3G220 board supports Alarms and performance events monitoring, ESC function,

TNV3G220 board supports Loopback, Protection scheme, Electrical-layer ASON, PRBS test function when ports are used as tributary ports and line ports

TNV3G220 board supports Physical clock, Test frame only when ports are used as tributary ports

The TNV3G220 board is a 20-port 10G General Service Processing Board. Each port on the board can be used as a tributary port , a line port (line mode) or a line port (relay mode). It supports 1.25G, 2.5G, 10G, etc. modules and can be configured according to needs.

Tech Specs
Front Panel
V3G220
Valid Slots
OptiX OSN 9800 U32 Standard subrack: IU1 to IU32
OptiX OSN 9800 U32 Enhanced subrack: IU1 to IU32
OptiX OSN 9800 U64 Standard subrack: IU1 to IU64
OptiX OSN 9800 U64 Enhanced subrack: IU1 to IU64
Initial Version of Different Subrack
V100R007C00SPC500
Function and Features
Functions and features of the G220 board (when ports are used as tributary ports) Description
Basic function Supports the following service conversions:
ODU0 non-convergence mode (Any->ODU0)
20 x (125 Mbit/s to 1.25 Gbit/s signals) <-> 20 x ODU0.
ODU1 non-convergence mode (Any->ODU1)
20 x (1.49 Gbit/s to 2.67 Gbit/s signals) <-> 20 x ODU1.
ODU2 non-convergence mode (OTU2/Any->ODU2)
20 x 10GE LAN(GFP-F)/10GE WAN/STM-64/OC-192/OTU2/FC800/FICON8G<-> 20 x ODU2
20 x 10GE LAN(BMP)/OTU2e/FC1200<-> 20 x ODU2e
ODUflex non-convergence mode (Any->ODUflex)
20 x 3G-SDI/3G-SDIRBR/FC400/FICON4G/FC800/FICON8G/10GE LAN(GFP-F)<-> 20 x ODUflex
6 x FC1600<->6 x ODUflex
ODU1_ODU0 mode (OTU1->ODU1->ODU0)
20 x OTU1<-> 40 x ODU0
ODU1 convergence mode (16*Any->ODU1)
16 x (125 Mbit/s to 2.5 Gbit/s signals) <-> ODU1
NOTE: In ODU1 convergence mode (16*Any->ODU1) , the board supports GE service mapping using the GFP-T procedure.
Service encryption Supports setting the encryption function by port.
NOTE:
When working in ODU1 convergence and ODU1_ODU0 mode, the board does not support encryption.
When working in an OSN 9800 M24 subrack, the board does not support service encryption.
Client-side service type SDH/SONET service:
STM-1/OC-3: SDH/SONET service at a rate of 155.52 Mbit/s
STM-4/OC-12: SDH/SONET service at a rate of 622.08 Mbit/s
STM-16/OC-48: SDH/SONET service at a rate of 2488.32 Mbit/s
STM-64/OC-192: SDH/SONET service at a rate of 9.95 Gbit/s
Ethernet service:
FE: Ethernet service at a rate of 125 Mbit/s
GE: Ethernet service at a rate of 1.25 Gbit/s. Supports GE optical signals and GE electrical signals.
10GE LAN: Ethernet service at a rate of 10.31 Gbit/s
10GE WAN: Ethernet service at a rate of 9.95 Gbit/s
OTN service:
OTU1: OTN service at a rate of 2.67 Gbit/s
OTU2: OTN service at a rate of 10.71 Gbit/s
OTU2e: OTN service at a rate of 11.1 Gbit/s
SAN service:
FC100: SAN service at a rate of 1.06 Gbit/s
FC200: SAN service at a rate of 2.12 Gbit/s
FC400: SAN service at a rate of 4.25 Gbit/s
FICON: SAN service at a rate of 1.06 Gbit/s
FICON Express: SAN service at a rate of 2.12 Gbit/s
FICON4G: SAN service at a rate of 4.25 Gbit/s
FC800: SAN service at a rate of 8.5 Gbit/s
FICON8G: SAN service at a rate of 8.5 Gbit/s
FC1200: SAN service at a rate of 10.51 Gbit/s
FC1600: SAN service at a rate of 14.025 Gbit/s
ESCON: SAN service at a rate of 200 Mbit/s
FDDI: SAN service at a rate of 125 Mbit/s
Video service:
SDI: Serial digital interface at a rate of 270 Mbit/s
HD-SDI: Bit-serial digital interface for high-definition television systems at a rate of 1.49 Gbit/s
HD-SDIRBR: Bit-serial digital interface for high-definition television systems at a rate of 1.49/1.001 Gbit/s
3G-SDI: Video service at a rate of 2.97 Gbit/s
3G-SDIRBR: Video service at a rate of 2.97/1.001 Gbit/s
DVB-ASI: Video service at a rate of 270 Mbit/s
NOTE: When 10GE LAN services are received on the client side and mapped into ODUflex, the client equipment must support flow control response.
Cross-connect capabilities Supports backplane cross-connections of 20 ODU0/ODU1/ODU2/ODU2e/ODUflex signals from/to the cross-connect board.
OTN function Supports the OTN frame format and overhead processing defined by ITU-T G.709. The mapping process complies with ITU-T G.7041, ITU-T G.709 and G.Sup43.
ODUflex layer: supports PM overhead processing.
ODU0/ODU1/ODU2 layer: supports PM and TCM overhead processing, and non-intrusive monitoring of PM and TCM overheads.
OTU1/OTU2 layer: supports SM overhead processing.
LPT function Supported when the client-side service type is FE, GE or 10GE LAN.
FEC coding Supports ITU-T G.709-compliant forward error correction (FEC) on the client side when the client-side service type is OTU1 or OTU2(e).
ALS function Supports the ALS function on the client side when client services are non-OTN services.
Latency measurement When non-OTN services are received on the client side of the board, the PM section latency measurement is supported in the backplane direction (upstream direction). When OTN services are received on the client side of the board, the TCM section latency measurement is supported in the optical port direction (downstream direction).
IEEE 1588v2 Supports TC mode, TC+OC mode, BC mode and OC mode.
NOTE: Supports this function when receiving GE (GFP-T) services on the client side.
Supports this function when receiving 10GE LAN services on the client side and Port Mapping is set to MAC Transparent Mapping (10.7G).
Only ports 1-15 support IEEE 1588v2.
The port equipped with an electrical module does not support IEEE 1588v2.
ITU-T G.8275.1 Supports BC mode
NOTE: Supports this function when receiving GE (GFP-T) services on the client side.
Supports this function when receiving 10GE LAN services on the client side and Port Mapping is set to MAC Transparent Mapping (10.7G).
Only ports 1-15 support ITU-T G.8275.1.
The port equipped with an electrical module does not support ITU-T G.8275.1.
ITU-T G.8273.2 Only the board of an 9800 M24 subrack supports ITU-T G.8273.2.
Port MTU The value ranges from 1518 to 9600, in bytes. That is, the maximum size of the supported Jumbo frame is 9600 bytes.
Ethernet service mapping mode GE: GE(TTT-GMP), GE(GFP-T)
10GE LAN: Bit Transparent Mapping (11.1G), MAC Transparent Mapping (10.7G)
Functions and features of the G220 board (when ports are used as line ports (line mode)) Description
Basic functions Each port on the G220 board supports the following service conversions:
Automatic consecutive:
8xODU0<->4xODU1<->1xODU2<->1xOTU2
4xODU1<->1xODU2<->1xOTU2
8 x ODU0/4 x ODU1/8 x ODUflex/1 x ODU2<->1 x OTU2
Assign random:
8xODU0/4xODU1/8xODUflex<->1xODU2<->1xOTU2
1xODU2<->1xOTU2
1 x ODU2e<->1 x OTU2e
Each port on the board supports a mix of ODU0, ODU1, and ODUflex signals.
Cross-connect capabilities Supports a maximum of 160 ODU0 signals, 80 ODU1 signals, 160 ODUflex signals, or 20 ODU2/ODU2e signals and cooperates with cross-connect boards to implement service grooming.
OTN functions Supports OTU2/OTU2e on the WDM side.
Supports the OTN frame format and overhead processing defined by ITU-T G.709.
OTU2 layer: supports SM overhead processing.
ODUk (k=0, 1, 2, flex) layer: supports PM and TCM overhead processing, and non-intrusive monitoring of PM and TCM overheads.
WDM specification Supports DWDM specifications.
Tunable wavelength function Supports tunable wavelength optical modules that provide for 80 wavelengths tunable in the C band with 50 GHz channel spacing.
Latency measurement The board supports latency measurement in the WDM-side optical port direction (upstream direction). When higher-order cross-connections are created on the line board, TCM section latency measurement is supported for higher-order channels. When lower-order ODUk cross-connections are created on the line board, PM/TCM section latency measurement is supported for higher-order channels, and TCM section latency measurement is supported for lower-order ODUk channels.
FEC coding Supports ITU-T G.709-compliant forward error correction (FEC) on the WDM side.
Supports ITU-T G.975.1-compliant AFEC-2 on the WDM side.
Optical-layer ASON Supported
Functions and features of the G220 board (when ports are used as line ports (relay mode)) Description
Basic function Electrically regenerates optical signals at an electrical REG station.
Supported service rate OTU2: OTN service at a rate of 10.71 Gbit/s
OTU2e: OTN service at a rate of 11.1 Gbit/s
OTN function Supports OTU2/OTU2e interface the WDM side.
Supports the OTN frame format and overhead processing defined by ITU-T G.709.
OTU2 layer: supports SM overhead processing.
ODU2 layer: supports PM and TCM overhead processing, and non-intrusive monitoring of PM and TCM overheads.
WDM specification Supports DWDM specifications.
Tunable wavelength function Supports tunable wavelength optical modules that provide for 80 wavelengths tunable in the C band with 50 GHz channel spacing.
FEC coding Supports ITU-T G.709-compliant forward error correction (FEC) on the WDM side.
Supports ITU-T G.975.1-compliant AFEC-2 on the WDM side.
Optical-layer ASON Supported
Mechanical Specifications
Dimensions (W x H x D, mm) 477.3 x 30.5 x 220.0
Weight (kg) 4.8
Typical Power Consumption (W) 121
Maximum Power Consumption (W) 129
Additional information
Bandwidth

10G

Features

,

Port

12-24

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “TNV3G220”

Your email address will not be published. Required fields are marked *

You have to be logged in to be able to add photos to your review.

Why Thunder-link.com

10 Years Experience

As a global leading professional Huawei network hardware and solution provider, we have delivered Huawei, ZTE, Nokia, CISCO, Fiberhome, etc, equipment to 500+ customer groups in 90+ countries over the past 10 years. Know more

Premium Quality Guaranteed

Strict 3-Level Quality Control procedure: 1st-Level inspection; 2nd-Level In-stock test; 3rd-Level 24 hour pre-delivery test to guarantee premium quality. Know more

Value over price

What we offer to our customers is value rather than price. We make customers enjoy the benefit of our reliable delivery products and generate more value to the greatest extent. Know more

Tailored Technical Support

We provide customers personalized and professional tech support by remote diagnosis, fault-location and troubleshooting. "We are here to help you instantly when you need it."

Flexible Payment

We continuously offer flexible payment methods such as Wire Transfer, Paypal, L/C, Western Union and Alipay, to help customer enjoy a more convenient shopping experience. Know more

Official Document Resource

We provide official and extensive document resources to guide our customers to targetly solve the problem they may meet. Know more

1 Year Warranty Guaranteed

Our products come with 1 year warranty. Customers can ask for a repair, replacement or refund for a major product failure. Know more

Fast Global Shipping

We won't stop to develop rapid and cost effective shipping options, provide the excellent experience for our global customers. Know more

One Stop Solution

We provide not only network products but also network proposal, mainstream and cost efficient solution to assist customers eliminate the concerns.