| Front Panel |
 |
| Valid Slots |
OSN9800 U32 Standard subrack: IU1 to IU32
OSN9800 U32 Enhanced subrack:IU1 to IU32
OSN9800 U64 Standard subrack: IU1 to IU64
OSN9800 U64 Enhanced subrack: IU1 to IU64
OSN 9800 M24 subrack: (IU1, IU13), (IU2, IU14), …, (IU11, IU23), (IU12, IU24)
In the 1:3 mode, service boards cannot be installed in slots (IU6, IU18) and (IU7, IU19) |
| Initial version of different subrack: V100R007C00SPC500 |
| Functions and features (line mode) |
| Basic functions |
N220 supports the following service conversions: |
| Assign consecutive: |
| 8 x ODU0<->4 x ODU1<->1 x ODU2<->1 x OTU2 |
| 4 x ODU1<->1 x ODU2<->1 x OTU2 |
| Assign random: |
| 8 x ODU0/4 x ODU1/8 x ODUflex<->1 x ODU2<->1 x OTU2 |
| 1 x ODU2<->1 x OTU2 |
| 1x ODU2e<->1 x OTU2e |
| Each port on the board supports a mix of ODU0, ODU1, and ODUflex signals. |
| Cross-connect capabilities |
Supports a maximum of 160 ODU0 signals, 80 ODU1 signals, 160 ODUflex signals, or 20 ODU2/ODU2e signals and cooperates with cross-connect boards to implement service grooming. |
| OTN functions |
Supports OTU2/OTU2e on the WDM side. |
| Supports the OTN frame format and overhead processing defined by ITU-T G.709. |
| OTU2 layer: supports SM overhead processing. |
| ODUk (k=0, 1, 2, flex) layer: supports PM and TCM overhead processing, and non-intrusive monitoring of PM and TCM overheads. |
| WDM specification |
Supports DWDM specifications. |
| Tunable wavelength function |
Supports tunable wavelength optical modules that provide for 80 wavelengths tunable in the C band with 50 GHz channel spacing. |
| ESC function |
Supported |
| PRBS test function |
Supports the PRBS function on the WDM side. |
| Latency measurement |
The board supports latency measurement in the WDM-side optical port direction (upstream direction). When higher-order cross-connections are created on the line board, TCM section latency measurement is supported for higher-order channels. When lower-order ODUk cross-connections are created on the line board, PM/TCM section latency measurement is supported for higher-order channels, and TCM section latency measurement is supported for lower-order ODUk channels. |
| FEC coding |
Supports ITU-T G.709-compliant forward error correction (FEC) on the WDM side. |
| Supports ITU-T G.975.1-compliant AFEC-2 on the WDM side. |
| NOTE: Boards that use different FEC modes cannot interconnect with each other. |
| NOTE: Only the IN1/OUT1 to IN8/OUT8 and IN11/OUT11 to IN18/OUT18 support AFEC-2 encoding. |
| Alarms and performance events monitoring |
Monitors BIP8 bytes (Bursty mode) to help locate line failures. |
| Monitors parameters such as the bias current, temperature, and optical power of the laser. |
| Monitors OTN alarms and performance events. |
| Loopback |
WDM Side Loopback |
ODU1 Channel Loopback |
ODU0 Channel Loopback |
ODUflex Channel Loopback |
| Supported |
Supported |
Supported |
Supported |
| Functions and features (relay mode) |
| Basic function |
Electrically regenerates optical signals at an electrical REG station. |
| Supported service rate |
OTU2: OTN service at a rate of 10.71 Gbit/s |
| OTU2e: OTN service at a rate of 11.1 Gbit/s |
| OTN function |
Supports OTU2/OTU2e interface the WDM side. |
| Supports the OTN frame format and overhead processing defined by ITU-T G.709. |
| OTU2 layer: supports SM overhead processing. |
| ODU2 layer: supports PM and TCM overhead processing, and non-intrusive monitoring of PM and TCM overheads. |
| WDM specification |
Supports DWDM specifications. |
| Tunable wavelength function |
Supports tunable wavelength optical modules that provide for 80 wavelengths tunable in the C band with 50 GHz channel spacing. |
| ESC function |
Supported |
| FEC coding |
Supports ITU-T G.709-compliant forward error correction (FEC) on the WDM side. |
| Supports ITU-T G.975.1-compliant AFEC-2 on the WDM side. |
NOTE:
Boards that use different FEC modes cannot interconnect with each other. |
NOTE:
Only the IN1/OUT1 to IN8/OUT8 and IN11/OUT11 to IN18/OUT18 support AFEC-2 encoding. |
| Alarms and performance events monitoring |
Monitors BIP8 bytes to help locate line failures. |
| Monitors parameters such as the bias current, temperature, and optical power of the laser. |
| Monitors OTN alarms and performance events. |
| WDM-Side Pluggable Optical Module Supported |
SFP+ -10G(with CDR)-(1471nm to 1611nm)(CWDM)-SMF-70km-I Specifications
SFP+ -10G-(1529.17nm to 1560.61nm)(DWDM,50GHz,Tunable)-SMF-40km Specifications
SFP+ -10G-(1529.17nm to 1560.61nm)(DWDM,100GHz)-SMF-80km Specifications
SFP+ -10G-(1529.17nm to 1560.61nm)(DWDM,100GHz)-SMF-40km Specifications
SFP+ -10G(with CDR)-(1529.55nm to 1560.61nm)(DWDM,100GHz,Tunable)-SMF-40km Specifications
SFP+ -0.125G to 11.3G-1310nm-SMF-10km Specifications
SFP+ -8.5G to 11.1G-(1552.93nm to 1560.2nm)(DWDM, 100GHz, Tunable)-SMF-40km
SFP+ -8.5G to 11.1G-(1544.92nm to 1552.12nm)(DWDM, 100GHz, Tunable)-SMF-40km
SFP+ -8.5G to 11.1G-(1537nm to 1544.13nm)(DWDM, 100GHz, Tunable)-SMF-40km
SFP+ -8.5G to 11.1G-(1529.16nm to 1536.22nm)(DWDM, 100GHz, Tunable)-SMF-40km |
| Mechanical Specifications |
| Dimensions (W x H x D,mm) |
30.5×477.5x 220 |
| Weight (kg) |
4.8 |
| Typical Power Consumption (W) |
121 |
| Maximum Power Consumption (W) |
129 |
![Icon [all products]](https://www.thunder-link.com/tl-content/uploads/2022/05/Icon-all-products-1.svg "Icon [all products]"){kind=icon}
All products
Reviews
There are no reviews yet.
There are no reviews yet.