| Front Panel |
 |
| Valid Slots |
OptiX OSN 9800 U32 Standard subrack: IU1 to IU32
OptiX OSN 9800 U32 Enhanced subrack: IU1 to IU32
OptiX OSN 9800 U64 Standard subrack: IU1 to IU64
OptiX OSN 9800 U64 Enhanced subrack: IU1 to IU64 |
| Initial Version of Different Subrack |
| V100R007C00SPC300 |
| Function |
Description |
| Basic function |
The maximum SDH capacity is 160 Gbit/s. |
| STM-n (n = 1, 4, or 16)/STM-64 optical signals |
| 3 x AU-3 -> 3 x VC-3 -> 3 x TU3 -> VC-4 -> AU-4 |
| OTU1 -> STM-16 -> VC-4 |
| NOTE: The S216 board supports the intra-board grooming of AU-3 signals. |
| Specifications of the optical module |
Supports eSFP/SFP+ pluggable optical modules. |
| Supports the detection and query of information about the optical module. |
| Provides the ALS function. The optical interface supports the setting of the on/off state of a laser. |
| Service processing |
Supports VC-12, VC-3, VC-4 and VC-4-Xc (X=4/16/64) concatenation services. |
| NOTE: When being installed in a U series subrack, the lower-order cross-connect board must be used to support VC-12 and VC-3 service granularities. |
| Overhead processing |
Supports the OTN frame format and overhead processing defined by ITU-T G.709. The mapping process complies with ITU-T G.7041 and ITU-T G.709. |
| OTU1 layer: supports SM overhead processing. |
| ODU1 layer: supports PM and TCM overhead processing, and non-intrusive monitoring of PM and TCM overheads. |
| Processes the section overheads of the STM-n (n=1, 4, 16, 64) signals. |
| Supports the transparent transmission and termination of the path overheads. |
| Supports the setting and query of the J0, J1, and C2 bytes. |
| Supports ECC communication. |
| Supports DCC transparent transmission for a maximum of any sixteen ports. The bytes that are transparently transmitted are D1–D3 and D4–D12. |
| Maintenance features |
Supports inloops and outloops at optical interfaces. |
| Supports loopbacks on VC paths. |
| Supports warm resets and cold resets. The warm reset does not affect services. |
| Supports the query of the manufacturer information of the board. |
| Supports the in-service loading of the FPGA. |
| Supports the upgrade of the board software without affecting services. |
| Supports the PRBS function. |
| Mechanical Specifications |
| Dimensions (W x H x D, mm) |
477.3 x 30.5 x 220.0 |
| Weight (kg) |
3. 0 |
| Typical Power Consumption (W) |
180 |
| Maximum Power Consumption (W) |
190 |
![Icon [all products]](https://www.thunder-link.com/tl-content/uploads/2022/05/Icon-all-products-1.svg "Icon [all products]"){kind=icon}
All products
Reviews
There are no reviews yet.
There are no reviews yet.