| Front Panel |
 |
| Valid Slots |
OptiX OSN 9800 U16 subrack: IU1-IU14
OptiX OSN 9800 U32 Standard subrack: IU1 to IU32
OptiX OSN 9800 U32 Enhanced subrack: IU1 to IU32
OptiX OSN 9800 U64 Standard subrack: IU1 to IU64
OptiX OSN 9800 U64 Enhanced subrack: IU1 to IU64 |
| Initial Version of Different Subrack |
| V100R019C10SPC300 |
| Function |
Description |
| Basic function |
The maximum SDH capacity is 2*40 Gbit/s. |
| 2 x 8 x STM-n (n = 1, 4, or 16)/2 x 4 x STM-64 optical signals |
| OTU1->ODU1->STM16->VC-4 |
NOTE: The SDH capacity of the TX1/RX1~TX8/RX8 or TX9/RX9~TX16/RX16 ports on the TNV4S216 board is 40 Gbit/s.
When being used to receive/transmit STM-16 services, ports TX1/RX1 to TX8/RX8 can support a maximum of two channels of STM-64 services.
When being used to receive/transmit STM-16 services, ports TX9/RX9 to TX16/RX16 can support a maximum of two channels of STM-64 services.
There is no limit on the numbers of STM-16 services and STM-1/STM-4 services that can be received or transmitted concurrently.
There is no limit on the numbers of STM-64 services and STM-1/STM-4 services that can be received or transmitted concurrently. |
| Specifications of the optical module |
Supports eSFP/SFP+ pluggable optical modules. |
| Supports the detection and query of information about the optical module. |
| Provides the ALS function. The optical interface supports the setting of the on/off state of a laser. |
| Service processing |
Supports VC-12, VC-3, VC-4 and VC-4-Xc (X=4/16/64) concatenation services. |
NOTE: In a U series subrack, the board can support VC-12 and VC-3 services only when working with the lower-order cross-connect board SXCL.
In an M24 subrack supports VC-12 and VC-3 services only when the G1CXP or SXCL board is used. |
| Overhead processing |
Supports the OTN frame format and overhead processing defined by ITU-T G.709. The mapping process complies with ITU-T G.7041 and ITU-T G.709. |
| OTU1 layer: supports SM overhead processing. |
| ODU1 layer: supports PM and TCM overhead processing, and non-intrusive monitoring of PM and TCM overheads. |
| Processes the section overheads of the STM-n (n=1, 4, 16, 64) signals. |
| Supports the transparent transmission and termination of the path overheads. |
| Supports the setting and query of the J0, J1, and C2 bytes. |
| Supports ECC communication. |
| Supports DCC transparent transmission for a maximum of any sixteen ports. The bytes that are transparently transmitted are D1–D3 and D4–D12. |
| NOTE: Deleting the logical port that accesses STM-n (n = 1, 4, 16, 64) services will interrupt DCN communication at this port. |
| Maintenance features |
Supports inloops and outloops at optical interfaces. |
| Supports loopbacks on VC paths. |
| Supports warm resets and cold resets. The warm reset does not affect services. |
| Supports the query of the manufacturer information of the board. |
| Supports the in-service loading of the FPGA. |
| Supports the upgrade of the board software without affecting services. |
| Supports the PRBS function. |
| SDH ASON |
Supported when used with the TNU1CTU/TNS1CTU board. |
| Mechanical Specifications |
| Dimensions (W x H x D, mm) |
477.3 x 30.5 x 220.0 |
| Weight (kg) |
2.92 |
| Typical Power Consumption (W) |
144 |
| Maximum Power Consumption (W) |
153 |
![Icon [all products]](https://www.thunder-link.com/tl-content/uploads/2022/05/Icon-all-products-1.svg "Icon [all products]"){kind=icon}
All products
Reviews
There are no reviews yet.
There are no reviews yet.