![Icon [all products]](https://www.thunder-link.com/tl-content/uploads/2022/05/Icon-all-products-1.svg "Icon [all products]"){kind=icon}
All products
0 in stock Ready to ship
TNV5N220
Huawei OSN 9800 U64/U32/M24 20-port 10G Line Service Processing Board
19
People watching this product now!
Hardware Compatibility
Hardware Compatibility x
Backed up by our experienced pre-sales support team, and volume documentation, to avoid purchasing incompatible hardware.
Hardware Tested
Hardware Tested x
In order to avoid hardware malfunction, each equipment will be strictly tested before delivery and the test report will be packed inside equipment and delivered together. Learn more
Description
TNV5N220 20-port 10G line service processing board
Applied to Huawei OSN 9800 U64, U32 and OSN9800 M24 subrack
Supports electrical cross-connections, OTN interfaces, and ESC communication
Supports a maximum of 160 ODU0 signals, 80 ODU1 signals, 160 ODUflex signals, or 20 ODU2/ODU2e signals and cooperates with cross-connect boards to implement service grooming
Supports Optical-layer ASON
Supports Loopback only working in line mode
Supports Protection scheme of ODUk SNCP, tributary SNCP protection, and intra-board 1+1 protection (when working with the OLP/DCP/QCP board) only working in line mode
TNV5N220 is a 20-port 10G line service processing board, applied to Huawei OSN 9800 U64/U32 and M24. TNV5N220 has only one variant TNV5N220S01.
Tech Specs
| Front Panel | ||||
 |
||||
| Valid Slots | ||||
| OSN 9800 U32 Standard subrack: IU1 to IU32 OSN 9800 U32 Enhanced subrack: IU1 to IU32 OSN 9800 U64 Standard subrack: IU1 to IU64 OSN 9800 U64 Enhanced subrack: IU1 to IU64 OSN 9800 M24 subrack: (IU1, IU13), (IU2, IU14), …, (IU11, IU23), (IU12, IU24) In the 1:3 mode, service boards cannot be installed in slots (IU6, IU18) and (IU7, IU19). |
||||
| Initial version of different subrack: V100R019C10SPC300 | ||||
| Functions and features (line mode) | ||||
| Basic functions | N220 supports the following service conversions: Assign consecutive: 8 x ODU0<->4 x ODU1<->1 x ODU2<->1 x OTU2 4 x ODU1<->1 x ODU2<->1 x OTU2 Assign random: 8 x ODU0/4 x ODU1/8 x ODUflex<->1 x ODU2<->1 x OTU2 1 x ODU2<->1 x OTU2 1x ODU2e<->1 x OTU2e Each port on the board supports a mix of ODU0, ODU1, and ODUflex signals. |
|||
| Cross-connect capabilities | Supports a maximum of 160 ODU0 signals, 80 ODU1 signals, 160 ODUflex signals, or 20 ODU2/ODU2e signals and cooperates with cross-connect boards to implement service grooming. | |||
| OTN functions | Supports OTU2/OTU2e on the WDM side. Supports the OTN frame format and overhead processing defined by ITU-T G.709. OTU2 layer: supports SM overhead processing. ODUk (k=0, 1, 2, flex) layer: supports PM and TCM overhead processing, and non-intrusive monitoring of PM and TCM overheads. |
|||
| WDM specification | Supports DWDM specifications. | |||
| Tunable wavelength function | Supports tunable wavelength optical modules that provide for 80 wavelengths tunable in the C band with 50 GHz channel spacing. | |||
| ESC function | Supported | |||
| PRBS test function | Supports the PRBS function on the WDM side. | |||
| Latency measurement | The board supports latency measurement in the WDM-side optical port direction (upstream direction). When higher-order cross-connections are created on the line board, TCM section latency measurement is supported for higher-order channels. When lower-order ODUk cross-connections are created on the line board, PM/TCM section latency measurement is supported for higher-order channels, and TCM section latency measurement is supported for lower-order ODUk channels. | |||
| FEC coding | Supports ITU-T G.709-compliant forward error correction (FEC) on the WDM side. Supports ITU-T G.975.1-compliant AFEC-2 on the WDM side. NOTE: Boards that use different FEC modes cannot interconnect with each other. |
|||
| Alarms and performance events monitoring | Monitors BIP8 bytes (Bursty mode) to help locate line failures. Monitors parameters such as the bias current, temperature, and optical power of the laser. Monitors OTN alarms and performance events. |
|||
| Loopback | WDM Side Loopback | ODU1 Channel Loopback | ODU0 Channel Loopback | ODUflex Channel Loopback |
| Supported | Supported | Supported | Supported | |
| Functions and features (relay mode) | ||||
| Basic function | Electrically regenerates optical signals at an electrical REG station. | |||
| Supported service rate | OTU2: OTN service at a rate of 10.71 Gbit/s | |||
| OTU2e: OTN service at a rate of 11.1 Gbit/s | ||||
| OTN function | Supports OTU2/OTU2e interface the WDM side. | |||
| Supports the OTN frame format and overhead processing defined by ITU-T G.709. | ||||
| OTU2 layer: supports SM overhead processing. | ||||
| ODU2 layer: supports PM and TCM overhead processing, and non-intrusive monitoring of PM and TCM overheads. | ||||
| WDM specification | Supports DWDM specifications. | |||
| Tunable wavelength function | Supports tunable wavelength optical modules that provide for 80 wavelengths tunable in the C band with 50 GHz channel spacing. | |||
| ESC function | Supported | |||
| PRBS function | Not supported | |||
| FEC coding | Supports ITU-T G.709-compliant forward error correction (FEC) on the WDM side. Supports ITU-T G.975.1-compliant AFEC-2 on the WDM side. NOTE: Boards that use different FEC modes cannot interconnect with each other. |
|||
| Alarms and performance events monitoring | Monitors BIP8 bytes (Bursty mode) to help locate line failures. Monitors parameters such as the bias current, temperature, and optical power of the laser. Monitors OTN alarms and performance events. |
|||
| WDM-Side Pluggable Optical Module Supported | ||||
| XFP-10G-(1529.17nm to 1560.61nm)(DWDM,50GHz,Tunable)-SMF-40km specifications XFP-10G-(1529.17nm to 1560.61nm)(DWDM,100GHz)-SMF-40km Specifications |
||||
| Mechanical Specifications | ||||
| Dimensions (H x W x D,mm) | 477.3 x 30.5 x 220.0 | |||
| Weight (kg) | 3.6 | |||
| Typical Power Consumption (W) | 169 | |||
| Maximum Power Consumption (W) | 187 | |||
Additional information
| Bandwidth |
10G |
|---|---|
| Features | |
| Port |
12-24 |
Q&A
Q: V2N220 V3N220 and V5N220 all are OSN9800 20-port 10G line board, are their any differences?
A: Please check their comparison below:
| Model | TNV2N220 | TNV3N220 | TNV5N220 |
| Subrack supported | OSN 9800 U64 /U32/U16 | OSN 9800 U64/ U32/M24 | OSN 9800 U64/U32/M24 |
| Latency measurement | Not support | Support | Support |
| Optical Module type | 10G XFP | 10G SFP+ | 10G XFP |
| Tunable wavelength function | 40 wavelengths tunable in the C band with 100 GHz channel spacing; 80 wavelengths tunable in the C band with 50 GHz channel spacing |
80 wavelengths tunable in the C band with 50 GHz channel spacing | 80 wavelengths tunable in the C band with 50 GHz channel spacing |
Reviews (1)
1 review for TNV5N220
Why Thunder-link.com
Nivaldo
Slovakia
We bought OSN9800 here, and got a 10G line card TNV5N220 from Thunder-link, good price.