![Icon [all products]](https://www.thunder-link.com/tl-content/uploads/2022/05/Icon-all-products-1.svg "Icon [all products]"){kind=icon}
All products
| Front Panel | |||
 |
|||
| Valid Slots | |||
| OptiX OSN 9800 M24 subrack: (IU1, IU13), (IU2, IU14), …… , (IU11, IU23), (IU12, IU24) OSN 9800 U32 Standard Subrack: IU1-IU32 OSN 9800 U32 Enhanced Subrack: IU1-IU32 OSN 9800 U64 Standard Subrack: IU1-IU64 OSN 9800 U64 Enhanced Subrack: IU1-IU64 |
|||
| Initial Version of Different Subrack | |||
| V100R007C00SPC700 | |||
| Function and Features | |||
| Basic function | Supports the following service conversions: ODU0 non-convergence mode (Any->ODU0) n x (125 Mbit/s to 1.25 Gbit/s signals) <-> n x ODU0. ODU1 non-convergence mode (Any->ODU1) n x (1.49 Gbit/s to 2.67 Gbit/s signals) <-> n x ODU1. ODU2 non-convergence mode (Any->ODU2(e)) n x 10GE LAN(GFP-F)/10GE WAN/STM-64/OC-192/OTU2/FC800/FICON8G<-> n x ODU2 n x 10GE LAN(BMP)/OTU2e/FC1200<-> n x ODU2e ODUflex non-convergence mode (Any->ODUflex) n x 3G-SDI/3G-SDIRBR/FC400/FICON4G/FC800/FICON8G/FC1600/10GE LAN(GFP-F)<-> n x ODUflex 4 x FC1600<->4 x ODUflex ODU1_ODU0 mode (OTU1->ODU1->ODU0) n x OTU1<-> 2n x ODU0 ODU1 convergence mode (14*Any->ODU1) 14 x (125 Mbit/s to 2.5 Gbit/s signals) <-> ODU1 |
||
| Service encryption | Supports setting the encryption function by port. NOTE: When working in ODU1 convergence mode and ODU1_ODU0 mode, the board does not support encryption. |
||
| Client-side service type | SDH/SONET service: | ||
| STM-1/OC-3: SDH/SONET service at a rate of 155.52 Mbit/s | |||
| STM-4/OC-12: SDH/SONET service at a rate of 622.08 Mbit/s | |||
| STM-16/OC-48: SDH/SONET service at a rate of 2488.32 Mbit/s | |||
| STM-64/OC-192: SDH/SONET service at a rate of 9.95 Gbit/s | |||
| Ethernet service: | |||
| FE: Ethernet service at a rate of 125 Mbit/s | |||
| GE: Ethernet service at a rate of 1.25 Gbit/s. Supports GE optical signals and GE electrical signals. | |||
| 10GE LAN: Ethernet service at a rate of 10.31 Gbit/s | |||
| 10GE WAN: Ethernet service at a rate of 9.95 Gbit/s | |||
| OTN service: | |||
| OTU1: OTN service at a rate of 2.67 Gbit/s | |||
| OTU2: OTN service at a rate of 10.71 Gbit/s | |||
| OTU2e: OTN service at a rate of 11.1 Gbit/s | |||
| SAN service: | |||
| FC100: SAN service at a rate of 1.06 Gbit/s | |||
| FC200: SAN service at a rate of 2.12 Gbit/s | |||
| FC400: SAN service at a rate of 4.25 Gbit/s | |||
| FICON: SAN service at a rate of 1.06 Gbit/s | |||
| FICON Express: SAN service at a rate of 2.12 Gbit/s | |||
| FICON4G: SAN service at a rate of 4.25 Gbit/s | |||
| FC800: SAN service at a rate of 8.5 Gbit/s | |||
| FICON8G: SAN service at a rate of 8.5 Gbit/s | |||
| FC1200: SAN service at a rate of 10.51 Gbit/s | |||
| FC1600: SAN service at a rate of 14.025 Gbit/s | |||
| ESCON: SAN service at a rate of 200 Mbit/s | |||
| FDDI: SAN service at a rate of 125 Mbit/s | |||
| Video service: | |||
| SDI: Serial digital interface at a rate of 270 Mbit/s | |||
| HD-SDI: Bit-serial digital interface for high-definition television systems at a rate of 1.49 Gbit/s | |||
| HD-SDIRBR: Bit-serial digital interface for high-definition television systems at a rate of 1.49/1.001 Gbit/s | |||
| 3G-SDI: Video service at a rate of 2.97 Gbit/s | |||
| 3G-SDIRBR: Video service at a rate of 2.97/1.001 Gbit/s | |||
| DVB-ASI: Video service at a rate of 270 Mbit/s | |||
| NOTE: When 10GE LAN services are received on the client side and mapped into ODUflex, the client equipment must support flow control response. | |||
| OTN function | Supports the OTN frame format and overhead processing defined by ITU-T G.709. The mapping process complies with ITU-T G.7041, ITU-T G.709 and G.Sup43. | ||
| ODUflex layer: supports PM overhead processing. | |||
| ODU0/ODU1/ODU2 layer: supports PM and TCM overhead processing, and non-intrusive monitoring of PM and TCM overheads. | |||
| OTU1/OTU2 layer: supports SM overhead processing. | |||
| ESC function | Supported when the client-side service type is OTU1/OTU2/OTU2e. NOTE: Only the TX1/RX1-TX16/RX16 optical ports support ESC function. |
||
| FEC coding | Supports ITU-T G.709-compliant forward error correction (FEC) on the client side when the client-side service type is OTU1 or OTU2(e). | ||
| Alarms and performance events monitoring | Monitors BIP8 bytes (Bursty mode) to help locate line failures. | ||
| Monitors B1 bytes to help locate faults. | |||
| Monitors OTN alarms and performance events. | |||
| Monitors parameters such as the bias current, temperature, and optical power of the laser. | |||
| Supports the remote monitoring (RMON) of Ethernet services. | |||
| ALS function | Supports the ALS function on the client side when client services are non-OTN services. NOTE: The port equipped with an electrical module does not support ALS. |
||
| Latency measurement | When non-OTN services are received on the client side of the board, the PM section latency measurement is supported in the backplane direction (upstream direction). When OTN services are received on the client side of the board, the TCM section latency measurement is supported in the optical port direction (downstream direction). | ||
| IEEE 1588v2 | Supports TC mode, TC+OC mode, BC mode and OC mode. | ||
| NOTE: Supports this function when receiving GE (GFP-T) services on the client side. Supports this function when receiving 10GE LAN services on the client side and Port Mapping is set to MAC Transparent Mapping (10.7G). Only ports 1-15 support IEEE 1588v2. The port equipped with an electrical module does not support IEEE 1588v2. |
|||
| ITU-T G.8275.1 | Supports BC mode | ||
| NOTE: Supports this function when receiving GE (GFP-T) services on the client side. Supports this function when receiving 10GE LAN services on the client side and Port Mapping is set to MAC Transparent Mapping (10.7G). Only ports 1-15 support ITU-T G.8275.1. The port equipped with an electrical module does not support ITU-T G.8275.1. |
|||
| ITU-T G.8273.2 | Only the board of an 9800 M24 subrack supports ITU-T G.8273.2. | ||
| Physical clock | GE(TTT-GMP): Supports synchronous Ethernet transparent transmission | ||
| 10GE LAN, Bit Transparent Mapping (11.1 G): Supports synchronous Ethernet transparent transmission | |||
| GE(GFP-T): Supports synchronous Ethernet processing | |||
| 10GE LAN, MAC Transparent Mapping (10.7 G): Supports synchronous Ethernet processing | |||
| Port MTU | The value ranges from 1518 to 9600, in bytes. That is, the maximum size of the supported Jumbo frame is 9600 bytes. | ||
| Ethernet service mapping mode | GE: GE(TTT-GMP), GE(GFP-T) | ||
| 10GE LAN: Bit Transparent Mapping (11.1G), MAC Transparent Mapping (10.7G) | |||
| Mechanical Specifications | |||
| Dimensions (W x H x D, mm) | 477.3 x 30.5 x 220.0 | ||
| Weight (kg) | 2.36 | ||
| Typical Power Consumption (W) | 118 | ||
| Maximum Power Consumption (W) | 126 | ||
Reviews
There are no reviews yet.
There are no reviews yet.