| Front Panel |
 |
| Valid Slots |
OptiX OSN 9800 U32 Standard/Enhanced subrack:IU1-IU32
OptiX OSN 9800 U64 Standard/Enhanced subrack:IU1-IU64
OptiX OSN 9800 M24 subrack:
(IU1, IU13), (IU2, IU14), ……, (IU11, IU23), (IU12, IU24)
In the 1:3 mode, service boards cannot be installed in slots (IU6, IU18) and (IU7, IU19). |
| Initial version of different subrack: |
| V100R019C10SPC300 |
| Functions and features (line mode) |
| OTN functions |
Supports the OTU1/OTU2 interface on the WDM side |
| Supports the OTN frame format and overhead processing defined in ITU-T G.709 |
| OTU1/OTU2 layer: supports SM overhead processing |
| ODUk (k=0, 1, 2) layer: supports PM and TCM overhead processing, and non-intrusive monitoring of PM and TCM overheads |
| ODUflex layer: supports PM overhead processing, and non-intrusive monitoring of the PM overhead |
| FEC coding |
Supports ITU-T G.709-compliant forward error correction (FEC) on the WDM side |
| Supports ITU-T G.975.1-compliant AFEC-2 on the WDM side |
| WDM specification |
Supports ITU-T G.694.1-compliant DWDM specifications |
| Latency measurement |
Supported |
| Optical-layer ASON |
Supported |
| PRBS test function |
Supports the PRBS function on the WDM side |
| Protection schemes |
Supports ODUk SNCP |
| Supports tributary SNCP protection |
| Supports intra-board 1+1 protection (when working with the OLP or DCP board) |
| Alarms and performance events monitoring |
Monitors BIP8 bytes (Bursty mode) to help locate line failures |
| Monitors parameters such as the bias current, temperature, and optical power of the laser |
| Monitors OTN alarms and performance events |
| ESC |
Supported |
| Functions and features (relay mode) |
| Basic function |
Electrically regenerates optical signals at an electrical REG station |
| Supported service rate |
OTU2: OTN service at a rate of 10.71 Gbit/s |
| OTU2e: OTN service at a rate of 11.1 Gbit/s |
| WDM specification |
Supports DWDM specifications |
| Tunable wavelength function |
Supports tunable wavelength optical modules that provide for: |
| 40 wavelengths tunable in the C band with 100 GHz channel spacing |
| 80 wavelengths tunable in the C band with 50 GHz channel spacing |
| ESC function |
Supported |
| Physical clock |
Not supported |
| PRBS function |
Not supported |
| Alarm and performance event monitoring |
Monitors BIP8 bytes (Bursty mode) to help locate line failures |
| Monitors parameters such as the bias current, temperature, and optical power of the laser |
| Monitors OTN alarms and performance events |
| WDM-Side Pluggable Optical Module Supported |
SFP+ -10G(with CDR)-1550nm-SMF-80km
SFP+ -10G(with CDR)-1550nm-SMF-40km
SFP+ -10G(with CDR)-1310nm-SMF-10km
SFP+ -10G-(1529.17nm to 1560.61nm)(DWDM,50GHz,Tunable)-SMF-40km
SFP+ -10G-(1529.17nm to 1560.61nm)(DWDM,100GHz)-SMF-80km
SFP+ -10G-(1529.17nm to 1560.61nm)(DWDM,100GHz)-SMF-40km
SFP+ -10G(with CDR)-(1529.55nm to 1560.61nm)(DWDM,100GHz,Tunable)-SMF-40km
SFP+ -0.125G to 11.3G-1310nm-SMF-10km
eSFP-2.5G-(1529.17nm to 1560.61nm)(DWDM,100GHz)-SMF-120km
eSFP-2.5G-(1471nm to 1611nm)(CWDM)-SMF-80km
eSFP-2.5G-1310nm-SMF-15km |
| Mechanical Specifications |
| Dimensions(W x H x D,mm) |
477.3×30.5x 220 |
| Weight (kg) |
3.3 |
| Typical Power Consumption (W) |
240 |
| Maximum Power Consumption |
255 |
Reviews
There are no reviews yet.
There are no reviews yet.