My Cart

Mini Cart

TNZ2UXCL01 (Z2UXCL_Z1SCC_Z1STG)

TNZ2UXCL01 (Z2UXCL_Z1SCC_Z1STG)

PN: 03032VFQ
RFQ

Huawei OSN 1800 II Enhanced System Control, Cross-connect and Clock Board

- +
Hardware Tested

Hardware Tested x

In order to avoid hardware malfunction, each equipment will be strictly tested before delivery and the test report will be packed inside equipment and delivered together.Learn More

Hardware Compatibility

Hardware Compatibility x

Backed up by our experienced pre-sales support team, and volume documentation, to avoid purchasing incompatible hardware.

Software Compatibility

Software Compatibility x

Software compatibility test between active/standby system board, main control board and service board, mother/sub-card; system commissioning test to prevent all software conflicts.

Huawei WDM-OTN Equipment Test Procedure

In this topic, we take Huawei OSN 8800 as example to show you how to test the WDM/OTN equipment (Huawei OSN 6800 etc)

Overview

TNZ2UXCL01 (Z2UXCL_Z1SCC_Z1STG) system control, cross-connect and clock board

Logical Board on the NMS: Z2UXCL (TNZ2UXCL cross-connect board), Z1SCC (system control board), Z1STG (timing board)

Apply to Huawei OSN 1800 II Enhanced

Supports 1+1 hot backup

Supports non-revertive manual and automatic switching

Supports outband DCN, inband DCN, and ESC functions

Supports extraction, insertion, and processing of SSM information and clock ID

 

TNZ2UXCL01 (Z2UXCL_Z1SCC_Z1STG) is a system control, cross-connect and clock board applied to Huawei OSN 1800 II Enhanced. The logical slots for the TNZ2UXCL board on the NMS are slots 7 (07/17/27) and 8 (08/18/28). The TNZ2UXCL board can be configured as the Z2UXCL/Z1SCC/Z1STG logical boards to provide the functions of a system control, cross-connect, and timing board and implement cross-connection of ODUk (k = 0, 1, 2, 2e, flex)/VC-4/VC-3/VC-12 services and switching of packet services.

Tech Specs
Front Panel 
  
System Control and Communication Unit 
Function and Feature Description
Basic functions Grooms services, manages configurations, and reports alarms in a subrack.
Backs up NE Data. When the data of an NE changes, the system control and communication unit immediately saves changed data to a storage medium to ensure that the NE data still exists after the NE undergoes a cold reset or power failure. This feature improves NE reliability.
Implements communication between NEs through IP over DCC or HWECC.
Protection Supports 1+1 hot backup.
Supports non-revertive manual and automatic switching.
DCN Supports outband DCN, inband DCN, and ESC functions.
Fan alarm management Provides 1+1 power supplies to fans, supports fan speed adjustment and fan fault detection, and manages fan alarms
Subrack fan operating mode configuration Supported
Power supply management Checks whether the power input board can be detected
Master/Slave subrack Not supported
Cross-Connect Unit
Function and Feature Description
Basic functions

Supports two cross-connect modes: O+P+S (OTN, packet, and SDH) mode and O+S (OTN and SDH) mode.

O+P+S mode:
Implements non-blocked cross-connections of 160 Gbit/s ODUk (k = 0, 1, 2, 2e, flex) signals.
Cross-connects and schedules 50 Gbit/s VC-4s, and 20 Gbit/s VC-12s/VC-3s.
Supports a packet service switching capacity of 160 Gbit/s.

O+S mode:
Implements non-blocked cross-connections of 200 Gbit/s ODUk (k = 0, 1, 2, 2e, flex) signals.
Cross-connects and schedules 50 Gbit/s VC-4s, and 20 Gbit/s VC-12s/VC-3s.

NOTE:
In O+P+S mode, a chassis-level packet function license is provided, whereas in O+S mode, no chassis-level packet function license is provided

Protection type Supports 1+1 hot backup.
Energy Saving Only hot backup is supported.
Clock Unit
Function and Feature Description
Basic functions

Implements clock synchronization on an NE, and provides system clock signals and frame header signals for service boards. The clock signals comply with ITU-T G.813 and ITU-T G.823.


Traces the external clock source, service clock source, or local clock source, and provides clock signals for itself and the system.


Supports IEEE 1588v2 time and frequency synchronization.
Supports G.8275.1.
Supports G.8273.2.

Other functions

Supports extraction, insertion, and processing of SSM information and clock ID.


Supports two external clocks by working with the TNF1AUX board.

Mechanical Specifications
Dimensions (W x H x D, unit: mm/in.) 193.8 x 22.4 x 205.9 (7.6 x 0.9 x 8.1)
Weight 0.80kg (1.8lb.)
Power Consumption
Typical Power Consumption (W) 77
Maximum Power Consumptiona (W) 86
Reviews
Write Your Own Review
You're reviewing:TNZ2UXCL01 (Z2UXCL_Z1SCC_Z1STG)
Your Rating:
Why Thunder-link.com
  •  

  •  

  •  

  •  

  •  

  •  

  •  

  •  

  •