![Icon [all products]](https://www.thunder-link.com/tl-content/uploads/2022/05/Icon-all-products-1.svg "Icon [all products]"){kind=icon}
All products
in stock 3-5 days lead time
TNZ5UNQ2
Huawei OSN1800V 4-port 10G universal line service processing board
20
People watching this product now!
Hardware Compatibility
Hardware Compatibility x
Backed up by our experienced pre-sales support team, and volume documentation, to avoid purchasing incompatible hardware.
Hardware Tested
Hardware Tested x
In order to avoid hardware malfunction, each equipment will be strictly tested before delivery and the test report will be packed inside equipment and delivered together. Learn more
Software Compatibility
Software Compatibility x
Software compatibility test between active/standby system board, main control board and service board, mother/sub-card; system commissioning test to prevent all software conflicts.
Huawei WDM-OTN Equipment Test Procedure
In this topic, we take Huawei OSN 8800 as example to show you how to test the WDM/OTN equipment (Huawei OSN 6800 etc)Description
TNZ5UNQ2 4-port 10G universal line service processing board.
Applied to Huawei OSN 1800 II Enhanced, OSN 1800V.
Support OTN, SDH, and packet services, and functions such as Layer 2 switching, OTN ports, and SDH overhead processing.
Supports Intra-Board 1+1 Protection, Tributary SNCP, ODUk SNCP (k = 0, 1).
Supports ESC communication.
Supports Electrical-layer ASON.
Supports inloops and outloops on VC-4 paths and virtual ports.
Supports outband data communication network (DCN).
Supports 1:1 PW FPS, 1:1 PW APS.
Supports MC-LAG, LPT, Packet SNCP, MC-PW APS, MRPS, LLDP, HQoS, Inband DCN, IGMP Snooping.
TNZ5UNQ2 is a 4-port 10G universal line service processing board applied to Huawei OSN 1800 II Enhanced, OSN 1800V. The UNQ2 board is a universal line board and supports hybrid transmission of ODU0, ODU1, ODU2, ODU2e, ODUflex, VC-12, VC-3, VC4, and packet services with the total bandwidth not exceeding 40 Gbit/s (the total bandwidth of SDH services does not exceed 20 Gbit/s). It can also receive and transmit only one or two of the three services. The UNQ2 board processes and converts the received service signals into four OTU2/OTU2e signals, which are carried over four ITU-T G.694.1-compliant DWDM wavelengths.
Tech Specs
| Front Panel | |||||
| There are ports on the front panel of the board.
|
|||||
| Basic functions | |||||
| OTN signals | 32 x ODU0/16 x ODU1/4 x ODU2/32 x ODUflex<->4 x OTU2 (OTU is the abbreviated form of optical channel transport unit.)
4 x ODU2e<->4 x OTU2e |
||||
| SDH signals | 8 x STM-16<->8 x ODU1<->2 x ODU2<->2 x OTU2
2 x STM-64<->2 x ODU2<->2 x OTU2 NOTE: For 1800 II Enhanced, a TNZ5UNQ2 board supports at most 5 Gbit/s bandwidth of SDH services. |
||||
| Packets | A maximum of 40 Gbit/s packets<->32 x ODU0/32 x ODUflex/16 x ODU1/4 x ODU2/ODU2e<->4 x OTU2/ODU2e | ||||
| Clock synchronization | OTN services: Supported (ODU0/ODU1/ODUflex)
SDH services: SDH clock synchronization is supported when SDH virtual ports are configured. Packet services: Physical-layer (ODU0/ODU1/ODUflex) clock synchronization is supported when packet virtual ports are configured. |
||||
| Specifications (OTN functions) | |||||
| Basic functions | Cross-connect functionality | Implements service grooming when working with cross-connect boards.
32 x ODU0/16 x ODU1/32 x ODUflex/4 x ODU2/4 x ODU2e |
|||
| Maintenance features | Loopbacks | Supports system-side channel inloops and outloops.
Supports WDM-side inloops and outloops. (This function has no impact on overheads and the PRBS function.) |
|||
| Pseudo random binary sequence (PRBS) test function | Supported | ||||
| Test frames | Not supported | ||||
| Delay measurement (DM) | Supported | ||||
| Alarms and performance events monitoring | Monitors parameters such as the bias current, operating temperature, and optical power of a laser.
Monitors OTN alarms and performance events. Monitors bit interleaved parity 8 (BIP8) bytes (Bursty mode) to help locate line failures. |
||||
| Specifications (SDH functions) | |||||
| Service processing | Supports VC-12, VC-3, VC-4, VC-4-4c, VC-4-64c, and VC-4-16c services (VC-4-4c, VC-4-64c, and VC-4-16c services are concatenated services). | ||||
| Overhead processing | Processes section overheads of STM-16/STM-64 signals.
Transparently transmits and terminates path overheads. Supports the setting and querying of J0 (to be received), J1, and C2 bytes. Provides transparent DCCs and orderwire byte channels. |
||||
| Protection schemes | Supports subnetwork connection protection (SNCP).
Supports subnetwork connection tunnel protection (SNCTP). Supports linear multiplex section protection (LMSP). Supports ring multiplex section protection (RMSP). |
||||
| Specifications (Packet functions) | |||||
| Service specifications | Processing capability | 40 Gbit/s
NOTE: For the OptiX OSN 1800 II Enhanced chassis, if OTN services are configured, the board supports a maximum of 30GE packet services. |
|||
| Service bearing media | MultiProtocol Label Switching Transport Profile (MPLS-TP) | Supported | |||
| 802.1Q in 802.1Q (QinQ) link | Supported | ||||
| Port | Supported | ||||
| Ethernet line (E-Line) | Native ETH service:
Point-to-point transparently transmitted E-Line service VLAN-based E-Line service QinQ-based E-Line service ETH PWE3 service: PW-based E-Line service (VPWS service) |
||||
| Ethernet local area network (E-LAN) | Native ETH service:
E-LAN service based on the IEEE 802.1d bridge E-LAN service based on the IEEE 802.1q bridge ETH PWE3 service: PW-based E-LAN service (VPLS service) |
||||
| MS-PW | Supported | ||||
| Jumbo frame | Supports a jumbo frame containing a maximum of 9600 bytes. | ||||
| Maximum frame length (MFL) for a port | The frame length is fixed at 9600 + 72 bytes and is not configurable. | ||||
| Maintenance features | MPLS-TP OAM | Supported | |||
| ETH-OAM | Supports Ethernet service OAM. | ||||
| RMON | Supported | ||||
| Support for port traffic mirroring | |||||
| WDM-Side Pluggable Optical Module | |||||
| XFP-10G-1310nm-SMF-10km
XFP-10G-1550nm-SMF-40km XFP-10G-1550nm-SMF-80km XFP-10G-(1529.17nm to 1560.61nm)(DWDM,100GHz)-SMF-80km XFP-10G-(1529.17nm to 1560.20nm)(DWDM,100GHz,Fixed)-SMF-40km XFP-10G-(1471nm to 1611nm)(CWDM)-SMF-70km XFP-10G-(1529.17nm to 1560.61nm)(DWDM,50GHz,Tunable)-SMF-40km XFP-10G-(1529.17nm to 1560.61nm)(DWDM,50GHz,Tunable)-SMF-80km |
|||||
| Version description of the UNQ2 board | |||||
| Board | Product Applicable-System Control Board-Initial Board Version Supported by System Control Board | ||||
| TNZ5UNQ2 | 1800 V-TNZ5UXCMS-V100R006C10
1800 V-TNZ8XCH-V100R009C00SPC700 1800 V-TNZ5XCS-V100R019C10SPC300 1800 II Enhanced-TNZ1UXCL-V100R007C10 1800 II Enhanced-TNZ2UXCL-V100R008C00SPC600 |
||||
| Mechanical Specifications | |||||
| Typical Power Consumption(W) | 63 | ||||
| Maximum Power Consumption(W) | 72 | ||||
| Dimension (W x H x D, mm) | 193.8 x 19.8 x 205.9 | ||||
| Weight(kg) | 1.2 kg | ||||
Additional information
| Weight | 3.0 kg |
|---|---|
| Dimensions | 37.5 × 34.0 × 7.5 cm |
| Bandwidth |
40G |
| Features |
Hardware Compatibility, Hardware Tested, Software Compatibility |
| Port |
1-10 |
Q&A
Q: What hardware versions are available for UNQ2?
A: UNQ2 only has one version TNZ5.
Q: Can I use UNQ2 on both OSN1800 V and OSN8800 II?
A: Yes, both OSN1800V and OSN1800 II support TNZ5UNQ2.
Q: Are there any system control board software version restrictions if I need use UNQ2 on OSN1800V or OSN1800 II?
A: Yes, TNZ5UNQ2 needs match with relative system control board and versions when deploying.
| Board | Product Applicable-System Control Board-Initial Board Version Supported by System Control Board |
| TNZ5UNQ2 | 1800 V-TNZ5UXCMS-V100R006C10
1800 V-TNZ8XCH-V100R009C00SPC700 1800 V-TNZ5XCS-V100R019C10SPC300 1800 II Enhanced-TNZ1UXCL-V100R007C10 1800 II Enhanced-TNZ2UXCL-V100R008C00SPC600 |
For 1800 V, TNZ5UNQ2 inserted on a slave subrack can function only as a pure OTN board.
TNZ5UNQ2 supports only OTN features when it is used together with the TNZ8XCH board.
For 1800 II Enhanced, a TNZ5UNQ2 board supports at most 5 Gbit/s bandwidth of SDH services, and does not support STM-64–>ODU2–>OTU2.
Q: What is the of TNZ5UNQ2 when it functions for packet service?
A: Processing capability is 40 Gbit/s.
But on OSN 1800 II Enhanced chassis, if OTN services are configured, TNZ5UNQ2 supports a maximum of 30GE packet services.
Q: What is the Max bandwidth of SDH services that TNZ5UNQ2 can support?
A: TNZ5UNQ2 MAX total bandwidth of SDH services does not exceed 20 Gbit/s.
Q: What is the difference between HSNQ2 and UNQ2?
A: HSNQ2 supports OTN and SDH, functions such as OTN ports and SDH overhead processing.
While UNQ2 supports OTN, SDH, and packet services, functions such as Layer 2 switching, OTN ports, and SDH overhead processing.
Reviews (2)
2 reviews for TNZ5UNQ2
Why Thunder-link.com
Jussila
Finland
Remind me to handle the custom issues, thank you.
Joseph
United Kingdom (UK)
We bought it for used for OSN1800V OTN SDH service expansion, and DHL express deliver the card to us very fast.